AutoCAD 2010 :: Deleting Old Customized Menu Using CUI Editor
Feb 9, 2012Trying to remove old customized menu from AutoCAD 2010. Open CUI Editor, right click on old menu file (*.cui) , but DELETE has been grayed out.
View 5 RepliesTrying to remove old customized menu from AutoCAD 2010. Open CUI Editor, right click on old menu file (*.cui) , but DELETE has been grayed out.
View 5 RepliesI am trying to create new custom menu and toolbar in autocad 2010 using VB.NET / C#. I tried the below URL for adding existing toolbar and menu. But i need to create new one.
[URL].......
We have had custom toolbars for many years that included custom pop menus etc. Now that we are running cuix customizations how do I edit these customized pop menus? Do I need to rewrite this stuff in lisp, vba, .net, whatever?
View 1 Replies View RelatedI am attempting to import a previous customized menu with routines that worked beautifully in Autocad 2002. I can import the menu but the routines don't work. I have copied the search paths identical to those in Autocad 2002 in the tools>options>files in the support file search path, but to no avail.
The menu was developed by Andy Pease (Andy Acad) who is now with Autodesk.
I am exporting thousands of shots for my website and I am making a customized watermark/copyright title for each collection. It is working fine except now I have quite a few customized watermarks which I probably will never use again. How do I remove these from the pull down menu?
View 8 Replies View RelatedI made a drop down menu for offset commands back on a 2010 version. I wish to bring it over but I'm having a bit of trouble. I have read through and watched a few videos and they all tell me the same thing. Go into the CUI, click on Load Partial Customized File. I do this, select my cui file and I get an error that says:
Partial customization file cannot have the same Customization Group Name as the main customization file.
The name of my file is OFFSET MENU. I'm running 2012 version and I have finally gotten almost everything setup except for this.
Is there any option to customize the reports generated from Civil 3D 2011.
View 2 Replies View Relatedhow can i edit or delete exit menu or sub menu or item menu?
View 2 Replies View RelatedWe've just started using an attribute in a dynamic block and I'm curious if there is a faster way to edit the text, like how you just click outside the dtext or mtext editor to save and exit. the editor.
We only need to edit the value field, not any of the other attritubes. I really like how the dynamic block is saving us some time, but the outdated editor is really irritating, and it's not always convenient to hit Tab then Enter on the keyboard.
Is there perhaps an alternate editor, or a way I can edit the value text in the mtext editor by default rather than opening up the Enhanced Attribute Editor?
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
I recently upgraded to 2012 but forgot to install the express tools, Doh!. I installed them through control panel repair and everything works. Except when I close and restart ACAD the menu bar express menu disappears. I can bring it back by using cuiload but this is not ideal. Any way to get it to stick?
AutoCAD 2012
Dell Precision T7400, Intel Xeon @3.4GHz
Win XP 32bit 4GB RAM
Nvidia Quadro FX 3700
Cyborg R.A.T. 7 mouse
I've been having a problem with my AutoCAD LT 2010 completely deleting files after I have saved them and closed them. There is no file in the recovery manager, no back up file, nothing. It has happened three times without warning and it always happens to files I've been working on for awhile and have opened and closed multiple times. Is there any way to recover these files and how do I keep it from happening again?
View 1 Replies View RelatedI have hundreds of drawings with attributes that are duplicated. I can't go through each individual drawing, call up BATTMAN and delete them one by one. I need a way to automate the process. The duplicates always show up in EATTE and show up most of the time in BATTMAN. I need a lisp that will find and delete duplicates shown in RED while leaving the originals intact.
View 6 Replies View RelatedI created a command that I no longer use. I actually made a spelling error upon creating it "SUPECLOSE" and I want to delete it.
This is how I created this command: I typed in ALIASEDIT in order to add a new alias to a command.
I then clicked on the "Add" button.
In the "Alias:" field, I typed in "xx"
And in the "AutoCAD Command:" field, I typed in "SUPECLOSE" - which isn't actually an autoCAD command. "SUPERCLOSE" is the command I use to run a custom LISP routine that I created. Upon hitting pressing "OK" to this, AutoCAD prompted me with: "'SUPECLOSE' is a new command, Do you want to add this to your list of commands?"
I said yes. And then shortly afterwards realized the spelling error I had made. Problem is...I don't know how to access this list and delete the new command that I had just created (which does nothing).
I have multiple paper spaces to show a variety of drawings. I currently have my floor plan as a viewport, but I need to delete it in order to add in my elevations. I tried deleting my current viewport, but it also deletes the rest of mine. How do I delete a viewport from only one paper space, so that it does not interrupt with my other drawings?
View 1 Replies View RelatedIs there an easy way to remove all the wipeouts in a drawing without deleting the entities they are attached to?
I have hundreds in some drawings, so I am trying to do a mass editing through lisp, but it won't remove just the wipeout, the text grouped with it gets deleted too.
When I insert a drawing from another source as a block into one my drawing - and then explode the block and change the exploded block layers to my layers. Then I purge out the old layers. Normally this works fine, but I have lately had trouble getting rid of some unwanted layers as everytime I have tried, I get the message that they are x-ref dependent and cannot be deleted or purged. I have tried to isolate them by freezing and turning off everything else, but there are no features, entities, "specks" whatever, to erase. I have looked at the xref command, and my drawing shows no rogue xrefs. I am not sure what to do to get rid of these layers.
View 8 Replies View RelatedCan not find the menu location for the node editor???
View 8 Replies View RelatedAfter installation I went directly into the editor and right away I saw that the software was very sluggish with my cursor dragging . After clicking on a top menu (File) the menu bar open (5 sec.)and if I scroll it down I do not see the blue color following my cursor, and if I click at the location in the bar of my cursor it takes a few second before it respond. I am also using the following adobe softwares that works flawlessly : Photoshop CS5.5 extended; Bridge; Camera Raw; Lightroom 4.2. My computer uses an Asus P7P55-E Premium motehrboard with Win 7 pro 64 bits with an intel I 860 2.8 mhz and 8 gigs of RAM. All my adobe softs are 64 bits, except for elements 11. After seeing that, I installed the upgrades without any visible problems. Even after that nothing has improved.
I have to say that I have quite a few softwares installed that all work perfectly such has Topaz bundle; Photomatix pro, etc. In fact of all my softwares this is the only one that is giving me troubles.
Is there a setting somewhere that keeps the Mtext Editor in the same place? I believe in previous versions if you specified "OldEditor" it would keep the editing box at the same size and same location that you specified. In ACAD 2012, if I change to "Old Editor" I get an error message - see attached.
I have tried MTEXTfixed at 0 or 1 with no luck. I do understand that you can zoom in and out to change the size of the text when editing.I run dual monitors and like to have the mtext editing on the screen without my drawing.
The new block editor is not working for me;
In the old cad we had the block editor where you can add and remove entities from the block; how will I do that now?
AutoCAD will be running fine but if i use the Block editior everything suddenly slows down.
It doesn't matter what block I edit or if I even edit a block but if I open and then close the Block editor it slows considerably.
I have treid Regen, Purge, Audit, Turning off snap's, Polar Tracking etc but nothing seems to work with the exception of closing and resetting AutoCAD
I have a block with attributes. When I use the enhanced attribute editor, under text options, the height is grayed out, not allowing me to change the height. How do I fix this?
View 1 Replies View RelatedAutoCAD 2010. I was editing a block in the block edit screen and it wouldnt save the block. My screen froze and I had to reboot the computer. Now when I open the drawing it is still in the block edit screen and I cant get out of it.
View 9 Replies View RelatedIs there a way to insert CAD blocks into the Multiline text editor, much like you are able to insert a block into a Table.
I am asking for the sole purpose of Plan Notes. When we lay out Plan Notes originally we place the note bubble next to the line of text it represents. When we have to come back at a later time and edit the mtext, sometimes add a line our users are in a rush and forget to re-align the note bubbles with the text. If there was a way to insert the block into the text editor and have it still be able to edit it.
Is this a feature in 2013?
AutoCAD MEP 2013
Window 7 pro 64 bit
E5440 (8 CPU) ~2.8ghZ
16GB RAM
NVIDIA QUADRO FX 3500 2270MB
Every so often, and I have not been able to determine common cause, when editing mtext in the default mtext editor the text in the editor will display as some other font - handletter, TXT, whatever - something other than the Romans I typically use. And both the style and the font are set to Romans. When I finish editing, the final text in the drawing is correct, so it is more an annoyance than anything.
View 2 Replies View RelatedWhile in the Dynamic Block Editor, there times you may zoom in and out.The Parameters & Actions icons & text might get really large.
Before Ribbons, there was a flag at the top of the Display which would reset the sizes.
can not find any way to reset the sizes so I can continue the editing.
The only way I've found to accomplish that is to exit from the Block Editor and re-enter it.
How to get the all the materials back in the materials palette?When I switch to 3D Modeling and go into the Render Tab in the Materials section, I do not have any materials loaded.
View 5 Replies View RelatedI have just downloaded AutoCAD Architecture 2014 and am finding the materials editor difficult as I am used to using the 2010 materials editor. Is there a way of changing the editor back to 2010 or is there a basic tutorial available on how to use the 2014 material editor?
View 1 Replies View RelatedIs it possible to modify .DXE files with a text editor?
I want to quickly find & replace the file paths DXE's are looking for (rather than run eattext every time I have a new drawing), but after opening in Notepad or Word AutoCAD displays error "...not valid extraction file."
BLK's were nice because files could be renamed and the schedule would still work. Now, the DXE will look for the old drawing rather than the one which has been renamed. Copying a file or using a template is impossible because you have to run eattext & create a new DXE every time the file name changes.
I tried to set MSWord 2007 (WinWord.exe) as my mtext editor by setting MTEXTED to the path to the exe file. When I try to create MText. I get an error that MSWord can't find a TMP file in the folder I created to hold my temp and autosave files.
Civil 3D 2012 SP 3
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
I discover synchronizing the attribute block does not work. Say I want to change the value E16 to E16a in block editor and after synchronizing the attribute does not change. What worse is that if I erase one attribute E16, then synchronize, the other attribute value (E18, E8) change to a different number (E16, E18*) . Attached is an example dwg.
View 2 Replies View Related