I am trying to create new custom menu and toolbar in autocad 2010 using VB.NET / C#. I tried the below URL for adding existing toolbar and menu. But i need to create new one.
[URL].......
I've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
Assume I have to increase oftentimes but not always the brightness of digital photos by a certain value (e.g. 20). The contrast should be 0.Ok, I could go now (in PSP X2) to menu
Adjust--->Brightness and Contrast---->Brightness/Contrast
then manually adjust the values and click OK.However these multiple steps is somehow unhandy. Even if I put the Brightess/contrast icon into the toolbar I still have always to adjust the actual values.
I want to perform this operation by ONE click.Is there a way to put a customized icon into toolbar which (when clicked) performs always the brightness/contrast operation with my pre-defined values regardless which values are set up currently in the "normal" brightness/Contrast dialog?
if yes: How can I do it (in PSP X2)?
Is there any way to set keyboard shortcut or toolbar button to customized find objects option (.fin file)? I am a average Coreldraw user, knows almost all basics, but lacks advanced use of Coreldraw. I like to use any techniques that saves time. I know it with adobe Photoshop (like action etc.) but not with Coreldraw.. I heard about macros.
For Now I need to
1) set keyboard shortcut or toolbar button to customized find objects option (.fin file)
2) set keyboard shortcut or toolbar button or macros for repetitive find & replace options...
3) create macros for simple moves & then after combine these type of simple macros in one macros...
4) set keyboard shortcut or toolbar button to that macros...
5) and any these type of time saving technique. (in selection making, replacing, finding, batch process etc..)
I want is make actions & then combine them to script & then set keyboard shortcuts for same...
Trying to remove old customized menu from AutoCAD 2010. Open CUI Editor, right click on old menu file (*.cui) , but DELETE has been grayed out.
View 5 Replies View RelatedWe have had custom toolbars for many years that included custom pop menus etc. Now that we are running cuix customizations how do I edit these customized pop menus? Do I need to rewrite this stuff in lisp, vba, .net, whatever?
View 1 Replies View RelatedI am attempting to import a previous customized menu with routines that worked beautifully in Autocad 2002. I can import the menu but the routines don't work. I have copied the search paths identical to those in Autocad 2002 in the tools>options>files in the support file search path, but to no avail.
The menu was developed by Andy Pease (Andy Acad) who is now with Autodesk.
I am exporting thousands of shots for my website and I am making a customized watermark/copyright title for each collection. It is working fine except now I have quite a few customized watermarks which I probably will never use again. How do I remove these from the pull down menu?
View 8 Replies View Relatedi am new to Adobe photoshop, and cannot figure out how to create a customized logo/signature to place on all my photos
View 1 Replies View RelatedI would like to add a customized menu in the main toolbar. Can't find any sample in ObjectARX 2011 samples. And it's really hard to find references.
View 9 Replies View RelatedI already add in the Quick Access Toolbar the "Layer Combo Control" and the "Ribbon Combo Box - Linetypes"
I would like to add also "Ribbon Combo Box - Object Color" BUT it seems impossible...
I copy it from Panels - Home - Properties and put it into Quick access Toolbar, but it never shows up and worse when I go back to CUI it has dissappeared...
The only things that works is the "color" function.
my toolbar that contain menu, insert etc is missing. what should i do?
View 3 Replies View RelatedI have been having problems using my layer toolbar dropdown menu. My drop down bar will show the current layer or the current layer and the layer of a selected object. I need to open the Layer Properties Manager in order to turn on/off or freeze/thaw other layers. It seems to happen the most when I have external references loaded into the drawing.
Also, the Layer Properties Manager has a few quirks. If I create a new layer, it will not record changes to the layer color, linetype, etc on the first try. I can make these changes, but when I close the Layer Properties box, all of the changes are lost. I need to reopen the Layer Properties Manager and make the changes again.
The Layer Properties Manager also seems to have a glitch where it will deselect from the manager back to the drawing without a mouse click. Also, when I click once on an external reference layer to select, it tells me I cannot modify this layer. I would assume this would pop up if it were a double click action for modification, but it does this after a single click.
It seems that there are some major glitches with the Layer Properties Manager.
I have installed AutoCAD 2013 student on my Laptop (Win7 32Bit) and want to work now.
But I have the problem that my Menubar always freezes / becomes instabil.
-> When I open ACAD, the menu bar is by default on "Home", when I click on the tab "Insert", the tools of "insert" aren't visible, there are still the tools from "Home" shown (Line, Polyline, Circle etc.)
But when I click on these wrong shown tools, the tools of "Insert" become active. (Only the 'surface' doesn't react)
Well, I see always the Home-tools. All the other tools aren't displayed to me, but they work (if u know where they are, you can guess and click and hope you hit the right one )
I have a company .cuix menu that is loaded as a partial menu to the main acad.cuix file. I want to delete all the toolbars and pull down menus associated with it and leave the other stuff in place. This is in Autocad 2011 but should also translate to 2013. So far, I have tried opening the CUI menu, going to the company.cuix partial menu and deleting the toolbars. Then I hit save, then Apply. Toolbars disappear and pulldown menus go away. But when I reload AutoCAD they come back.
View 1 Replies View RelatedI was working on a dynamic block and visibility states, but for uknown reason I don't see the visibility drop down on the block editor toolbar.
Is there a way to turn it on. I am using AutoCad 2010.
See the attached file for a screen shot.
How do I create "blank" toolbar buttons?
Using the CUI I can drag buttons from one toolbar to another to copy them but they remain linked. A change to one changes the other. How do I create a brand new button that I can add my code to?
where I can customize the appearance of my work space colors, other than the background.
The default color for the menu/toolbars is a dark gray. The menus that unfurl are a tan.
I'm having a display bug with the menu toolbar icons in Photoshop CS4 Extended. The icons don't show when mouse hovers over them and they don't show at all for the drop down menus. Can this be fixed?
I'm on WinXP, Athlon 64 4000+, 3GB ram, GeForce 6800 GT video card [driver 181.20]. I'm not sure if this is a video driver bug or CS4 bug.
My left hand menu is missing?? How do I get it back? Ive tried pressing tab and F but still nothing.
View 2 Replies View RelatedThe develop module toolbar menu of features on my LR 5.2 does not include Visualize Spots. How do I access this feature?
View 5 Replies View RelatedI try to freeze layer in ACAD LT 2013 from Layer-II toolbar menu but it is not working.
View 1 Replies View RelatedI want to create a menu for pulldowns to access often used blocks. Ive looked at the pallatte ooption but it seems its only for commands ?? Iam correct.
View 7 Replies View RelatedI'm creating a DVD Menu in Photoshop CS% for use in Encore authoring a DVD. My question is about workflow...
I've tried creating the elements of my menu in Photoshops "Film?Video" Preset which creates a document 720x480 / 72ppi (This is the NTSC Widescreen selection in the Preset)
The document size is too small to work with... it has to be enlarged to 160% or more... and become terribly pixelated.
Would a better workflow be to creat my menu in a larger Photoshop document with better resolution... and then free-transform it to a new document created at the Fim/Video Preset?
Also... in the Film/Video Preset there is a "Pixel Aspect Ratio Correction" setting that is a preview of the document in Widescreen mode. If I free-transfrom a larger Photoshop document to this Preset should the PAR Correction be turned ON of OFF when I place it?
I upgraded from the old Video Studio 10 Plus to the Corel Pro 3X. I am now in the process of downloading all the Get More updates. While I am doing this, here is my Menu/Chapter problem.
1. I created the first video (part 1). I somehow have a main menu, and the the second menu has my chapters to select. Yay! I saved the menu to My Favorites. The DVD works great, a person can select a chapter to play,etc.
2. Now I am trying to create the second video (part 2). Somehow in My Favorites I have two menu templates from the first DVD I created. I have tried selecting each one and am trying to create a main menu, and then the second menu with 4 chapters. But each time I end up with 4 chapter menus, but I want the second menu to have the 4 chapters on it that you select a chapter thumbnail that your want to view.
I hate to start from scratch because I like the fonts, etc. from the first DVD, which is part 1.
I made some menu buttons and they just don't look that great. They are supposed to be stacked and on the left side-about 6 of them. I want to do some rollover effects and stuff- any tips, examples.
View 7 Replies View RelatedI am trying to create a pull down menu in a door schedule. My goal is that when I load a door family into my model it will generate as much as the required schedule information as possible. Eliminating the need to manually fill out the schedule.
I have already set up shared parameters for typical schedule items; such as door material, door type, frame material, etc. I would like to set up pull down menus for the schedule items that will differ from door to door (fire rating for example), via the door family type parameters. The research I've done seems to point to using nested families. This is something I am not all that familiar with. Do I need to use nested families to do what I'm trying? If so, what would be the best way to do it? How would I create a nested family?
I'm working on creating a disc menu in VS Pro X4. I've customized several parts of my menu (background, music, text, etc.), but I can't figure out how to change the little highlight icons that appear next to the selected menu options. Is it even possible to customize these?
View 2 Replies View RelatedNeed some customized linetypes for RW, PL, and so on that I can use?
View 9 Replies View Relatedhow to create a customized scale bar, I scale through viewports but some authoritys insist on a scale bar when its not the norm, I need to create a 1:75 and a 1:30, basically the method to make whatever scale I need.
View 5 Replies View RelatedI made a drop down menu for offset commands back on a 2010 version. I wish to bring it over but I'm having a bit of trouble. I have read through and watched a few videos and they all tell me the same thing. Go into the CUI, click on Load Partial Customized File. I do this, select my cui file and I get an error that says:
Partial customization file cannot have the same Customization Group Name as the main customization file.
The name of my file is OFFSET MENU. I'm running 2012 version and I have finally gotten almost everything setup except for this.