AutoCAD 2010 :: Defining What It Means To Select Last
May 9, 2012
So I have this script I used to run in AutoCAD 2011 which involved mirroring a group of many layers and then moving the "last" object created. In 2011, when I moved "last", it considered everything I mirrored to be "last." In 2012, it is taking strinctly the last object I created, not the group of layers that I mirrored, to be "last." Is there an internal variable I can change so that "last" can mean everything I just mirrored again?
Im trying to create a list of text strings to select from defining material thickness and then plug that selection into a global form custom iproperty called "MaterialDescription".. Also, is it possible to access and pre-enter field text edit items in iLogic?
Using Photoshop CC, what the asterisk means inside the tab name? This is on the inside of the bracket, outside it would mean not saved. I'm using 16 bit files throughout and the ProPhoto RGB Workspace. Files are transferred in and out of Lightroom 5.2 as my front-end .
Months ago I downloaded photoshop CS5 by means the assistant.The 1st downloaded file came in corrupted and the 2nd attempt was not different. Both did not run. On that time I employed to download a 3G modem.
People from the support in the forum advised me not to download the files through 3G.Today I downloaded CS6 by means a fast ADSL connection , employing the Adobe Download Assistant.the downloaded finished I ran the installation, which ran normally .
Then as I attempted to start CS6 it crashed.I ask you whether there is any trouble with the setup available to download?
Yesterday, I upgraded from LR 4.0 to 4.1. Ever since that moment, when I try to launch it, Lightroom displays a progress bar with message: "Checking Catalog Point Curves". The progress bar advances to about 10% and then stops. I waited for about 20 minutes and it did not move at all. I had to force-quit. I tried that for a couple of times - same results.
Why did Adobe decide to start a new mode of UPDATING the old version instead of REPLACING the old version with the new one, like it used to be? As it was before, I could simply get back to using the older version. Now, there is no going back!
Do you even know what "Checking Catalog Point Curves" means?
My Vista system has developed a few bugs which are not cured by Norton 360.Dragging a window causes it to maximize in a few programs PASTE does not work in some programs -- including X4..The CROP tool stopped working in X4 but is OK in X5 High-lighting is erratic in WORD etc.
I can only run a "clean" install from my OEM disk which means reloading all applications. I was wondering if I should give up and install Windows 7.
What has been your experience with Windows 7/ Did you do a "clean" install or just the update.
I use all my knowledge of technical drawing from school many years ago to produce drawings in AutoCAD 2002, but I can't remember how you would define the dimensions of an ellipse in a drawing so that someone could produce it from the plotted output.
I have successfully opened a STEP file from our Engineering group and saved it away as an Inventor Assembly. I would like to define Materials and/or Surface finishes for all parts. Why wouldn't the Surfaces and Materials synchronize between the Styudio's Surface Creator and the BOM Materials Control in the Assembly area?
I have found the way to define a new Surface in the "Inventor Studio" Interface and saved it with a unique name. Now, I would like to assign that Surface as a Material to the parts in the assembly ... and of course I would like to define numerous other surfaces and materials for assignment to all the parts throughout the assembly. Finally, I would like these surfaces / materials to follow the model into Showcase for presentation purposes.
For some reason I cannot get the ATTDEF Dialoge box to stop appearing and get the command line prompts. I have all the system variables set correctly -
FILEDIA = 0 ATTDIA = 0 CMDDIA = 0
The ATTDIA should surpress the diaolog box and give me prompts but it does not.
Trying to figure out how to define the folder I want my drawing to search in to find a specific set of point styles we have set-up. As it is set up right now, I am not sure where the program is looking to find the standard set of point styles it is showing, but its just showing basic civil point (ie. CB's, IP's, BM's, etc.). I have tried a few things to make it automatically grab the point styles I have in a set-up folder but is won;t display them.
The reason I need this, is that I want to set it up so that when I import points from my survey file, I want them to automatically insert into my drawing as the correct block (or point style), based on the survey code used.
I'm trying to write an automated script that will clean up some drawings for me. I've figured most of it out, just need a command that will let me select all the text and mtext that is a certain style. Then need to be able to select all text on certain layers.
I have a drawing containing over 100 blocks with 8-10 attributes each. I want to align all the attribute text without rotating the associated blocks. I can select individual attributes by holding down the Ctrl key while I select each attribute. Then I can change the text angle in a pop-up dialog. Is there a quicker way to select all the attributes without having to click on each one? Remember that I do not want to rotate the whole block, just the attribute text.
Im trying out the "Demo"version and now find some anomaly.
If i use in ACAD2007: With "PSELECT" and then "P" or "L" i could select the last marked Object/Selectionset. I had just to select the Object with the mouse. Now in ACAD2010, with this routine i can only select objects which i have selected in a command (before or within).
For example: Draw a few circles and lines. Then copy 3 of them. ESC. And select another few. ESC and then use PSELECT P and it marks the three which i selected to copy and not these i've selected with mouse!
The same in Lisp with: (entget(entlast)) . You aren't able to select those object which where only marked by mouse.I know; mostly you use a command with some objects and then use another with the same objects, and it works. But when you klick ESC or even in Script or Lisp you got problems, and its not very "proper" at all. Is this the new handling with the selection set: feature odr big?
Having problem of trying to Move, Copy, Stretch etc an object and instead of being able to select a base point...Displacement (which is the default at the command prompt) is somehow selected and your object goes off to coordinate points? It's probably just a setting or its my mouse, but I didn't change anything and I'm just starting to see the problem.
As I move my cross hairs over an object in a drawing it wants to select or highlight the object without clicking on it. On detailed models/drawings it takes alot of time and is almost impossible to use. Is there a way to turn or toggle this function off?
I just tried to use the quick select feature by right clicking in my drawing but it is not selectable as the words "quick select" are greyed out. I tried restaring my PC but this hasn't fixed it.
If I type QSELECT the quick select box pops up but I don't want to have to type this every time I want to use this feature
How to use the command “select similar” to be applied on a selected part of the drawing? I wanted to use the “select similar” command to select all the columns for a particular drawing on the file but not in all the existing drawings. This is why I number obtained is 60 columns not 20!
Then how to choose the “window selection” in which the “select similar” command is applied?
When dealing with blocks, in this instance. If I select the entire object, I get one type of color in the layer pull down. If I select a portion of the object, I get a different color-what is going on? Is there a switch or something that I am missing?
I'm using AutoCAD Architecture 2010. When in 3D modeling workspace I go to Mesh Modeling tab and draw a mesh box (for example), and then in subobjet panel turn vertex , face or edge on but can not select the vertex etc to manipulate the mesh. Am I doing something wrong for freeform modeling!
We still do all of our AutoCAD drafting in 2-D.So we don't need the ViewCube.It gets in the way and won't let us select objects underneath the ViewCube.
It is easy to turn it off by going to User Interface.BUT, is there a way to turn it off as the default.The drawing I'm in right now has the ViewCube in half of the Viewports.
i have created viewports on the defpoints layer in paper space, but now i can't select them to modify. Is there a switch or variable that allows depoints objects to be selected?
I have an office with 3 network printers and 18 computers with Windows XP and AutoCAD + Revit 2010 installed. I never had issues related to printers I couldn't solve myself, but this time one of the machines decided not to allow me to use a specific printer (HP Designjet 70). When I select it, it quickly change the selected printer to "None". Its the only computer in the office with the issue, and I can't find out why. I already reinstalled the printer in many ways, even using other sharing paths, its useless. I imported AutoCAD settings from other machines, no use. Cleaned print spooler folder, reseted many settings to default, set it to off-line then on-line again, deleted useless PC3 files and everything that occurred to me, but still nothing changed it. The AutoCAD doesnt emmit errors, nothing, just refuse to accept the printer.
When a check area and I start selecting and the "green window " appears it won't let me select more than 3 points I was able to select multiple points. How can I fix this ?
