I try to move all of the AutoCAD templates and configuration files to Sharepoint.I added the path to a common ACAD.LSP to the AutoCAD - support paths.The problem is:
AutoCAD does not find the folder.
Only after I open a Share point folder in explorer and restart AutoCAD, it will have access to the ACAD.LSP and everything is fine. It does't matter which Share point Folder/Space I open.
I have a project of a residential building, made in ADT2011. The building has 17 levels. Levels from 2nd to 17th are identical. They created as an element linked to constructs. The other levels created as constructs.
I also have different view files for elevations, sections and perspectives.
The problem is that I can not control display configuration of objects in view files. The thing that I need is to turn off balconies' glasses in curtain walls of the elevation view files (To see what is behind the glass in 2d elevations). Now to achieve it, I have to turn off glasses in the original element file. But in that case the glass disappears also in plans, sections and perspective views, where I need it.
The question is: Can I control the visibility of the default infills for curtain walls independently for different view files?
I want to create finished paperspace-tabs, with a specific layer-configuration.
How can I manage that?Each tab has to be exported to PDF as a finished configuration, without changing layers in the end.
In the process of releasing 2013 to the office. We have about 60 machines being loaded, varying from 64-bit Win 7, 32-bit Win 7 and 32-bit Win XP. I have gone through and created new PC3 files for our two KIP printers (3000 & 7000 series). I added one custom page size to each to create a PMP that goes along with them. These files have been placed onto a network folder for all users to access. This is where my confusion begins.
When other users go to utilize these files it is giving an error stating that "the plotter configuration cannot be found, driver cannot be found, device cannot be found, yada yada. The none has been substituted."
So we began to look at the PC3 files and see what the issues are. When the same file on the Server is copied down to a local machine it changes back to a KIP10 driver down from a KIP11 driver on the network. Make Sense?
In order to fix I began running the "Add-A-Plotter Wizard" on the local machine. Created a new PC3 wiih a different name and went back into the program. Now the PC3's that did not work before WORK.
In short, since the 2013 version has a new file format do we have to run the "Add-A-Plotter Wizard" on all local machines before the standard PC3 file will work effectively? Or does having 2011 version still on the machines have an effect on these files?
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
we have problem opening read only files with Autocad 2012, 2013 from Sharepoint library. When user opening dwg file directly from Sharepoint library (with Share point webdav, from Explorer for example) to which he have only read only access, Autocad gives error
„Drawing file is not valid“. The same result for UNC path (\intranetprojekceRizeniProjektu64ArchivProjektu102575) or mapped drive.
When he use Autocad open dialog to find the file in Share point library and use „Open Read Only“ from dropdown, file is opened fine.
Also if user have write access rights to library (when I add him rights for writing for this library), autocad works fine.
We need opening files directly in Sharepoint library (not to download them to users computer) cause DWG files have attached another DWG files from library as XREFs.
May be the problem could be caused by DWL files, which cannot be created in read only library, whilst autocad didn’t recognized the library is read only. But we didn’t find how to disable DWL files in autovcad 2012 or higher.
I have set up a title block template I plan to use for ALL of my drawings.
I fallowed this website and PDF file at bottom: [URL]......
Great resource and very good explanation step by step which was what I was looking for; the problem I'm having is all his files are set up specifically for one project and I'm having difficulty setting it up for me.
I have everything finished but when I open my project .dwg file and SSM then new SSM file from template and customize the options everything looks fine however when I go to open a new sheet; yes it does open the template .dwt file however it completely open the whole .dwg file of the template so my viewport is the template viewport not my project .dwg file......
How do I get SSM to open new layout/paper spaces with the title block template but the viewport of my current project .dwg file.
I am working on AutoCAD 2014 how ever the majority of CAD uses in the office use LT2010
I am finding that if I amend a template the 2010 users cant open them is there a better way around this than creating a dwg and them using a LT machine to save the dwt?
I am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 2 Replies View Relatedwe have just upgraded from Inv 2011 to 2013. I am trying to create the drawing templates in 2013 by using the blank 2013 template and then copying our border from 2011 onto it. This works a treat apart from 1 thing.
The i properties do not get copied over as well so the sheet is blank from drawing number, title and the custom properties etc.
At my office, we use SharePoint as a filesystem. I'm able to open and edit a file (jpg) directly from the SharePoint location. But if i want to safe the file back Photoshop CS5 always freeze, i can't do anything. After about 15 minutes i get a small error message that told me that something with the volume is incorrect.
View 4 Replies View Relatedusing ACAD LT 2012. If he opens a DWG file from a Sharepoint site, makes some changes to the drawing and then SAVES the file, his changes are NOT saved and there is no indication that they were not saved. Needless to say this is critical.
View 6 Replies View Relatedhow to import a large number of .eps files that are templates into corel draw x3 so that when I click create new from template, these files come up in the list?
View 2 Replies View RelatedAfter the last couple updates for Coreldraw X6 (now running at v 16.4.0.1280) my version of Draw has been crashing when-ever I go to open any of our custom templates. The templates are rather complicated, and we've been using them for years... probably since Coreldraw 7 or so, and they've gracefully worked with every version of Corel up until now.
Each model year we create a new version of the template with the new model features and file the old ones away, which also ensure that the version of the template is not too old... ie, not still trying to work with CD7 files in CDX6.
I tried doing a workspace restore (F8 at start) and that would allow me to open the template through the File -> New From Template menu the first time, but once I had my workspace set-up again, the next template would crash Coreldraw.
Opening a template via the standard File->Open menu does not crash Coreldraw.
I've now figured out that if I close the Object Manager before opening a template Coreldraw does not crash.
There was also a similar problem with importing some components that we had created as separate files, and with the same result... if the Object Manager is closed the files import alright.
I understand that there may now be "bad objects" in the file that upset the import feature, but I also don't think I can mine my way through 1940 objects (29436 points) in each template to find the issue.
Our company just upgraded to AutoCad 2011. We get files from our clients that exports their files from revit. It seems that Autocad 2011 slows down when reading this files (cursor will have a second or two delay).
View 2 Replies View RelatedI have loads of dwgs made by a former employee at another site that have our company logo in the tile block. I need to replace the company logo with a new one. If it were not made from a dwt, I could change the .dwg file and just reinsert the block and let it redefine the block, done. But since all of the text in each drawing was input using a template, I cannot do this without losing all of that data. We are not permitted to explode the title block, delete the old logo & add a new one as the drawing format needs to remain as one entity. Is there a way to automatically update these dwgs without re-entering all of the title/revision block text on every drawing?
View 2 Replies View RelatedSo we have a new plotter at work, and I am trying to use it with the publish command. However, because all of our old drawings are saved with our old plotter name, choosing the new plotter isn't an option for all of our old dwgs that havent been set up using the new plotter name. Since our dwgs number in the 1000s, going through each one and renaming them would be impracticable.. but having to individually plot each one is pretty impracticable as well..
So I tried to figure out a workaround, by opening up our new template that has the new plotter configuration on it, hoping I would be able to use it to set all the old dwgs that I have open at the time to the new plot setting.. but the printer name comes up as something different when I try to use it for publish, and if I use it, I get an error and nothing prints. I know the settings used in the new template work, I have been able to print it out. So what I'm asking is, is there anyway I can use the new plotter to publish all of our old drawings?
i tried to print a drawing and it said configuration cannot be used for thefollowing reasons: either driver not found or driver has problem or device cannot be found. however i can print everything else except when i am using autocad?
View 9 Replies View RelatedFor almost a decade I'm used to AutoCAD standard 3D coordinates display: X to right, Y away and Z straight up. For some reason Inventor is configured differently: X to right, Y straight up and Z toward you.
View 3 Replies View RelatedI'm using ACA 2011
How do I configure dwg to pdf output to version 5, many customers do not have Reader 7 and have no intention of downloading the newer reader. I see no area in the Plot Configuration Editor??
What’s up with that
Since we've migrated to Windows 8 64b we have problems wih plotting some layouts. If I select my plotter it automatically goes to none after selecting and sometimes I get the following error message:
Most of the times I can use the plotter in the other layouts / drawings, but sometimes I have to restart AutoCAD or reboot the computer before the plotter works again. In some layouts we keep getting this problem even after reboot. I've tried reinstalling the plotter (with different drivers), tried different computers, purge and recover the drawings but no luck. The Plotter is a HP Designjet 800.
I need to set the Printer Configuration Search Path and the Plot Style Table Search Path. Currently I am using COM but the issue I have is that I need to run the same application on 2 different machines, one has only Autocad 2010 (xp-32bit), the other has both Autocad 2010 and Autocad 2012(win7-64bit) and I've got some difficulty to have it running.
Can I set those paths without using COM?
How to set or change the active display configuration with .NET. Currently I am sending this task to the command line. See below:
' This subroutine sets the correct display config with the supplied name Public Sub SetCurrentDisplayConfig(ByVal strDisplayConfig As String)Dim strCommand As String = "" strCommand = "-AECDISPLAYCONFIGSETCURRENT " & strDisplayConfig & vbCr AutoApp. Application. DocumentManager. MdiActiveDocument.SendStringToExecute(strCommand, True, False, False) End Sub
Whenever I attempt to print, I get the warning message below referring to a printer that I do not have. I presume it's an AutoCAD default setting, but I cannot find any place allowing me to change this default. It eventually prints, since as the warning message says, it then substitutes my Mac's default printer, Is there any way to change the AutoCAD setting.
View 2 Replies View RelatedConfiguring plotter/printer on newly upgraded laptop using Autocad LT 2007 with Win7. The printers that are re-installed are not available under that program.
View 8 Replies View RelatedI want to ask if in Autodesk Inventor 2013, can we create a part with a different configuration?
example:I made a cube the size of 10mm x 10mm x 10mm, after which it would be revised measures 15mm x 15mm x 15mm. The second revision to change the size of a 12mm x 12mm x 12mm.
Can all the revision is done in one file?And if I want to revise again be 10mm x 10mm x 10mm, can?
Have I been that provides revision always create a new file and the file number so much that hard to figure out which revision. I am still learning Autodesk Inventor 2013.
I am working on a project in Inventor. Long story short, the file destinations got messed up. I was in the process of getting them all in the same folder so that I could organize them, but now the main project won't open. I'm am not the most Inventor-savvy. how to fix it.
The message that pops up is "Cannot find applets configuration file"
Inventor 2013 on win7 64bit
In our College we use roaming profiles.
If I make changes to configuration while profile is "open" we run into lots of trouble including total dis-functioning of the mold design and OS does not recognize the inventor file extensions and more problems.
A work around solution we found is to completely un install the program from one computer while the profile is "open" so there will be no association between the profile and the local installations on all computers.
However, now I can not save the configuration changes in any of the class computers. ( our OS disk is protected against permanent changes and will reset itself on any restart reboot, unless an administrator does them).
I tried making changes to the configuration both as administrator user and also when giving the local user administrator privileges, but with no successes.
After rebooting, we lose all configurations.
I am having problems setting up one computers plot configuration to a networked plotter in the work station. With the other computers we were able to just add the plotter of choice and it would show up in the config. This one, however doesn't seem to work. We can print test pages to it and plot with other programs. Only AutoCAD doesn't see it. We've gone into plot options to see if the settings were any different from one computer to the next and they are all the same.
View 1 Replies View RelatedA client was looking to develop a custom interface for documenting iAssemblies.
Would it be possible with iLogic to:
1. Show form.
2. User selects a Browse button to select iAssembly to document.
3. List all iAssembly configurations in the form.
4. User picks configuration.
5. Select OK to create base view, projected view, and Parts List.
This may require API.
How to use different configuration of parts made with iLogoc in assembly? I want to have equal part with different configuration. I have a problem with the equal files.How to use different configuration of an assembly made with iLogic in assembly?
View 4 Replies View RelatedIs there a way to force a setting in a PC3 file?We have one set up to print rotated and sometimes for whatever reason it changes back to Auto for the rotation. It's under Graphics of the Custom Properties I would like to write something that if a person plots with this PC3 that to rotation will be forced to 90 degrees.
View 4 Replies View Related