3ds Max :: How To Export Model Of Historic Building To Quest 3D
Sep 17, 2012
I need to export a model of a historic building from 3ds max to Quest 3D and create a walk through. The model is very detailed and was not designed with my goal in mind. My job for now is to optimize and remove all unnecessary things from the model.
I got stuck very early on when I tried to bake the textures. I'm using VRay rendered and when I pick a certain object to render and use VrayCompleteMap element the rendered image always appears completely black.
View 5 Replies
ADVERTISEMENT
Oct 31, 2013
I am attempting to x-ref a building model that was drawn in 2013 MEP in a Civil3D drawing that contains the site surface. When I x-ref my building model into the site drawing and attempt to align and scale the building some of my walls become broken and missing. I have a feeling this is a scaling issue because on my site my north wall should be 24' long. The wall is 24' long in MEP, but that same 24' from Civil3D is only a 2' line segment in MEP. How to remedy this? I have tried scale the building model down in MEP first and it causes all kinds of problems with the door and window objects. I tried adjusting the x-ref scale prior to adding the x-ref and it does the same thing.
View 9 Replies
View Related
Jan 23, 2012
I have problem when i try to use function analyze mass model in revit building they show message like attached file.
View 1 Replies
View Related
Aug 20, 2013
I need to model a building that cascades down a steep sloped hill. Should I create a toposurface first and then model onto that or should I make my model and then apply it to a toposurface?
View 1 Replies
View Related
Feb 22, 2013
I wish to represent polygon features in a polygon topology using building models created in revit. Can this be done? If so, how?
View 3 Replies
View Related
May 14, 2013
I have a 3D model from a floor of a building, with 20 rooms on this floor. I have 3D blocks inserted as furniture for each of the rooms and want to create elevations from inside these rooms looking at the 4 walls to show the layout.
How can I position the viewports within each of the rooms to give me a 2D Elevation?
View 5 Replies
View Related
Sep 26, 2013
I am building a glyph font in Illustrator CS6. The problem here deals with a large number of assets, all of which need SVG exports at 32x32px (due to a strict grid definitions) for import and compiling purposes (assets need to be sequential in naming for accurate import and compile and maintenance as well). All of the AI export solutions I have seen require the SVGs to be on individual artboards or in separate layers in order to export.
Artboards are extremely limiting as AI has that infamous 100 artboard limit.
When it comes to the layers solution, as far as I can tell, there is no way via extensions or otherwise to take sublayers (grouped/compound paths intact; release to layers does not retain the compound paths) and turn them into top-level layers which can then, in turn, be exported as individual SVG's via this script modified by Tom Byrne.At this point it seems like an entirely manual process.
View 1 Replies
View Related
Mar 31, 2009
I'm working on a photo of a building from the late 1800s. The edge of the roof has a grainy halo around it. I'd like to extend this texture to the corner of the photo and eliminate the white background currently there.
View 3 Replies
View Related
May 4, 2013
One of the common processes we have to do is to transilate file formats into a type we can use. Most the time it is for use in AutoCAD MEP...
Is there a good one-stop place to get info on import export options from / to softwares included in Autodesk Building Design Suite Ultimate?
View 1 Replies
View Related
Apr 3, 2013
i have a historic residence i am working on and was wanting to sharpen my modelling skills a bit, but i have a fancy concrete baluster and i do not know how to model it. i would imagine create a profile as a pline and then array it around a center point, but does this make it a 3d model of just 2d items rotated around a 3d point.
View 4 Replies
View Related
Oct 12, 2011
How to export a 3D model from Revit 2012 into 3D Max for rendering?
View 3 Replies
View Related
Nov 7, 2013
I try to export a 3D layer in U3D format to place and manipulate it in a PDF file.
I use :
Photoshop CC (14.1.2) - french version
Mac Os Maverick 10.9 or Windows Seven
Solution for export U3D file ?
View 2 Replies
View Related
Feb 23, 2012
I'm working on a staircase with a decorative panel design.
I'd like to export the model to 3ds Max Design, convert the solid model to a mesh and then bend the mesh to follow a horizontal radius of curvature. Once that's done I'd like to be able to convert it back into a solid and import it back into AutoCAD.
View 7 Replies
View Related
Jan 15, 2013
I'm not looking to RENDER wireframe, I'm looking to export a model as ONLY a wireframe out and bring it into After Effects.
Essentially, I am trying to bring an .obj into After Effects using the plugin Element 3D. While I'm aware I can simply import the model as-is into Element 3D and use the wireframe texture that Element 3D comes with, I was wondering if it's possible to just export a model out of Maya in it's wireframe state. I wasn't 100% sure if the wireframe state was just a view or not.
View 1 Replies
View Related
Apr 4, 2008
i downloaded the trial version of 2k9, on a win xp machine, with the main interest in trying out this new feature...unfortunately i have yet been successfull in using it as autocad either locks-up durring the export or end up with an "unhandled exeption...eDegenerateGeometry"...
i'm also attaching the details of such an exception (and i probably should report this to autodesk for their investigations)...
View 9 Replies
View Related
Aug 28, 2013
A customer is trying to export a model for use in Revit. When he goes to the Environments tab -> BIM Exchange and the dialog opens... He has no option for RFA files... Only ADSK. Not sure what is going on.
View 3 Replies
View Related
Jan 23, 2012
I'm trying to export layouts to model space. Everything is fine except that I have items grouped in in the original drawing that are not in the new drawing. I don't want to change all the groups to blocks.
I,m using LT 2012
View 9 Replies
View Related
Oct 28, 2011
One time, a consultant sent us a 3D model in pdf format and I was able to rotate a model, cut sections and do an orbit rotation inside Adobe Acrobat.
I want to export my 3D model as a pdf file and able to do an orbit rotation within Acrobat.
View 9 Replies
View Related
Jun 13, 2012
is it some how possible to export my model as vda format. i am using Autodesk Inventor Professional 2012
View 1 Replies
View Related
Aug 6, 2012
I;m trying to setup linked files in max from AutoCAD Architecture 2013. However, for each file attached the levels of the project from ACA are not recognized in MAX - all the levels are stacked ontop of eachother in the same place. I did not see an option in the presets for MAX to understand this.
View 1 Replies
View Related
Mar 1, 2014
I already have a revit model of a building with the areas identified like "room A", "room B", etc. I exported it to FBX and opened with Unity but the information about the rooms was not there (I am assuming FBX format does not save that information)
I might be wrong but I beleive IFC format saves this information. The problem is that Unity does not import IFC files and the file seems way too complicated to make my own parser to read it. I was wondering if there is a lib or something that I could use to visualize the 3D model without losing the rooms identification.
View 1 Replies
View Related
Oct 12, 2011
If I don't set up UVs in my model and instead use PTex painting in Mudbox, can I then export the model to OBJ with UVW maps? I would like to import the model to Octane render which imports OBJ files and their UVW mapping.
I have Mudbox 2009 and am contemplating downloading the 2012 demo to see if Ptex painting makes things easier for me, but it won't work if I can't then bring the painted model into Octane or into my license of Max 2011.
View 4 Replies
View Related
Nov 7, 2013
VB code to do the EXPORTLAYOUT command? I need to create a batch program to do a large number of files from the layout to the model space. The program can either copy the layout to the modelspace and save or copy the layout to a new file. Either way is fine. These are old MDT files that we are moving into the Vault, but Vault doesn't like them and the drafters are using AutoCAD in modelspace to revise them.
View 4 Replies
View Related
Apr 24, 2013
Is there a way within Autocad to lock a layer so that only certain people have access (say using a password).
Also is there a way to export model space from one workbook to another. In that one is the standard company file and I want to build a sepearte workbook for my purposes (making specific paper spaces etc...) but I want to use their model space for the model space of my workbook. Also if possible to export would this exported model space make changes when changes were made on the original copy?
View 5 Replies
View Related
Nov 30, 2011
I am using File>Export Layout to Model... command.
The drawing exported in half scale means a circle with 10mm diameter dimension on it exported as a circle with 5mm diameter But the dimension on the circle remains as 10mm!!!
How does this happen and how can I fix it?
View 1 Replies
View Related
Jan 18, 2013
I have a file dwg with a drawing (drawing of the customer) in space model and space paper I have several layuot (5). How I can save or export that file only contained in model space (customer drawing) and one layout of the 5? For example space + layout model No. 3 ...
View 1 Replies
View Related
Apr 11, 2013
I'm working on 2013 AutoCAD along with V52.03 HydraCAD and have been trying to export a model to Navisworks. Currently I have Navisworks Freedom 2013 on my system. AutoCAD doesn't recognize "nwdout" as a command, it says unknown command. Does this have something to do with the Navisworks Freedom that I have on the machine instead of Navisworks Simulate?
View 5 Replies
View Related
Jan 1, 2014
I'd like to export AutoCAD file from a model built in 3Ds Max to get some engimeering drawings(as below) But the dwg file export from 3Ds Max is always with the wireframe(as the last one)
View 4 Replies
View Related
Sep 29, 2013
I need to export a layout to a new model -as a new drawing-. I did ths after bind all the X-ref files and explode them all then with "Export layout to new model" command from the right click menu on Layout tab. But the file is slightly big, the file has more than about 105 layout , the AutoCAD gets hang and after about 10-15 mins it shows a dialogue box contents"Unhandelled exception has occurred in a component in your application. If you click continue the application will ignore this and attempt to continue" I clicked on "Continue" and a file has been created with 0 bites.And that file cannot be opened.
View 8 Replies
View Related
Aug 6, 2010
I'm wondering if there is a possibility in Inventor to export a surface model as a STL file. I use CAD programs to prepare models for simulations in other software and I would like to work with Inventor because my Department uses it. Till now I have been using Solid Works and with a little trick it is possible to export surfaces as a STL file. In Inventor I didn't manage to do this. So, is it possible?
View 9 Replies
View Related
Oct 19, 2013
I need to export from 3d studio max 2013 some simple models in .3ds format with a simple material library such as a simple red, blu, yellow materials colors.
but I see that when I export from 3d studio max 2013 the models with the colors assigned to the model, when I reopen the .3ds file the model, appears all grey without the library and the colours.
I downloaded some model from internet in .3ds format that contains a simple colors material library (no texture) that is embedded in the .3ds file.
Is there a solution to export a simple model painted with some colours from a library?
(I don't need an external material with texture library such as .mat file)
I need this tip because when I import this models with Relux I need to mantein some colours.
View 2 Replies
View Related
