AutoCAD Map 3D :: How To Represent Polygon Feature Using Building Model
Feb 22, 2013I wish to represent polygon features in a polygon topology using building models created in revit. Can this be done? If so, how?
View 3 Replies
ADVERTISEMENT
Revit :: How To Show Site Plan That One Line Represent Building Contour
May 16, 2012by default revit shows roof plan in the Site plan view.
Is it possible to show site plan that one line would represent building contour? Also is it possible to cast shadows of all the building if the first floor is selected?
i was trying to make site plan from the fist floor, but since i gave intense topography ground is being cut and i need full topography. i am using 2013 revit.
AutoCAD Civil 3D :: MEP Building Model On Surface
Oct 31, 2013I am attempting to x-ref a building model that was drawn in 2013 MEP in a Civil3D drawing that contains the site surface. When I x-ref my building model into the site drawing and attempt to align and scale the building some of my walls become broken and missing. I have a feeling this is a scaling issue because on my site my north wall should be 24' long. The wall is 24' long in MEP, but that same 24' from Civil3D is only a 2' line segment in MEP. How to remedy this? I have tried scale the building model down in MEP first and it causes all kinds of problems with the door and window objects. I tried adjusting the x-ref scale prior to adding the x-ref and it does the same thing.
View 9 Replies View RelatedAutoCad 3D :: Creating Internal Room Elevations In Building Model?
May 14, 2013I have a 3D model from a floor of a building, with 20 rooms on this floor. I have 3D blocks inserted as furniture for each of the rooms and want to create elevations from inside these rooms looking at the 4 walls to show the layout.
How can I position the viewports within each of the rooms to give me a 2D Elevation?
3ds Max :: How To Export Model Of Historic Building To Quest 3D
Sep 17, 2012I need to export a model of a historic building from 3ds max to Quest 3D and create a walk through. The model is very detailed and was not designed with my goal in mind. My job for now is to optimize and remove all unnecessary things from the model.
I got stuck very early on when I tried to bake the textures. I'm using VRay rendered and when I pick a certain object to render and use VrayCompleteMap element the rendered image always appears completely black.
Revit :: Analyze Mass Model In Building
Jan 23, 2012I have problem when i try to use function analyze mass model in revit building they show message like attached file.
View 1 Replies View RelatedRevit :: Building Model On Sloped Toposurface
Aug 20, 2013I need to model a building that cascades down a steep sloped hill. Should I create a toposurface first and then model onto that or should I make my model and then apply it to a toposurface?
View 1 Replies View RelatedAutoCAD 2013 :: Extrude Polygon Creates Solid But Original Polygon Still There?
Aug 15, 2013Is there a setting for extruding polygons so it doesnt leave the original polygon.
When i extrude a polygon into a 3D solid, it extrudes fine but it also keeps the original polygon which means i have to delete it?
AutoCAD Inventor :: Model Update After Modify Feature Sketch
Feb 27, 2012I'm a new 2009 Inventor user (use mostly Solidworks for other jobs) and how to make the model update after I modify a feature sketch (e.g. I only add one more circle/hole to a sketch used for a somple extrusion, but the extra hole doesn't appear on the model). Tried all update-related commands but no luck so far. If I delete the feature and recreate it again everything works fine, but I stuff up all other features and mates that use the reference geometry...
View 2 Replies View RelatedAutoCAD Inventor :: Getting Model Feature From Selected Drawing Curve?
Sep 11, 2012Im trying to create some code for another user which takes the pre-selected drawing curve and retrieves the feature information from the model. More specifically, I want to pre-select the drawing curve of a hole, and then run the rule. The rule will take this selected drawing curve and get its model. Then from here I'm expecting I'll be able to use the Hole Feature classes in the API to retrieve the wanted information.
I've tried using SelectSet.Item(1by tut cannot seem to be able to set it as a drawing curve (or anything for that matter).
AutoCAD 2010 :: No Industry Model Feature Has Been Selected Message
Sep 25, 2013I am getting error 'No industry model feature has been selected' while trying to see the attribute of feature.
The below are steps followed
1. I have created materlized view
2. And created view
3. created view feature class
4. Opened the project in Map3D
5. generated the graphics
6. Selected the feature
7. click on Attribute information button.
8. Getting message "No industry model feature has been selected".
AutoCAD Map 3D :: Feature Classes Not Listed In Convert To Industry Model Dialog
May 27, 2013When connecting to an Industry Model one can use the Convert to Industry Model dialog.Here you can select the source you want to map. This can be an FDO connection, a file (SDF, SSQLite, DWG).If you choose DWG, 4 options can be used as input/source:
AutoCAD Entities,
Layers
Object data
Block Names
However, the MAP 3D feature classes (from Classification) are not listed here, nor can I find (Hoping I am overlooking it) a way of converting mapping them to the IM. Seems the only option is to redo the classification "defintion" effort again.
If this is the case, I am getting more the impression that Map3D is becomming a bunch of tools rather then a consistent framework supporting a step by step path from CAD to GIS to Industry Model type it is being marketed.
AutoCAD Inventor :: Dimensions Disappear When Updating Model (Tube And Pipe Feature)
Jul 19, 2013I am having trouble with dimensions disappearing in the drawing when I update my model.
I add the correct dimensions then when I update my model, all dimensions on the drawing disappear and I have to make them all again.
A little more info:
I am using the tube and pipe feature to drawing tubing inside of an assembly.
Process:
1) I draw the tubing routes and populate them (to show an actual swept tube)
2)Right click on the newly created route in the explorer and open the tube.
3)File->new->drw.
4)Add necessary dimensions to the tube drawing.
5)Save and close drawing
Up until this point everything is fine.
6)Edit the tube route in the assembly and save
7)Upon opening the drawing of that tube route ALL dimensions have disappeared.
3ds Max :: Imported Model From Sketchup - Zoom Feature In Viewport
Nov 14, 2013I imported a model into 3dsMax from Sketchup.
The model is a 5200 sf interior building space that I had applied materials & components to in Sketchup.
Now that I am working on the model in 3ds Max, I am having some issues with the application of materials to the objects. Basically, some of the objects kept some of the materials that I had applied in Sketchup; however, some of the materials did not come through into Max. When I try to remedy this and apply the correct materials to the object, it is linked/grouped to several other objects in the model that I do not want to apply the material to.
I have tried to make a copy of the material in the material editor and then reapply to the object, but it still applies it to several other unrelated objects.
Also, I seem to be having trouble with my zoom feature in the viewport....my zoom will sometimes work, but sometimes it will zoom all the way to extents of the model, and won't let me zoom back into the interior of the model space; I don't know if this problem is related to the previous issue.
Photoshop :: 3D Feature When Importing 3D Model / Unwelds Polys At UV Borders
Dec 27, 2012When I import any obj or dae file from Maya into Photoshop CS 6 then the program always unwelds the model's edges along the UV boundaries which causes a mess if I import the geometry back into any other 3d program as well as making photoshop unable to paint over seams accurately which is supposed to be one of the key advantages to using photoshop extended in the first place. how I can stop photoshop from doing this?
I used one of the simplest possible models and uvs to make sure it wasn't a problem on my end. URLs.....
AutoCad :: How To Represent Different Materials
Apr 27, 2012im drawing a wall section of a building on cad, the wall consists of outer brick, wall insulation & breezeblock.
is their an industry standard way to represent these materials? for example a certain type of hatch pattern that should be used?also, how should i represent the wall insulation?
AutoCAD Inventor :: Represent NPS Threads (not NPT)?
Apr 14, 2010How do I represent NPS threads (not NPT) in IV?
View 2 Replies View RelatedAutoCAD Inventor :: How To Represent Door Swing In IDW
Nov 30, 2011I would like to add a door to the model but show the top view as a door swing.
View 7 Replies View RelatedAutoCAD Map 3D :: Network Topologies - How To Represent Bridge / Tunnel
Jan 7, 2013Is there a way of attaching connectivity data to nodes in a network topology? For example, a bridge where two roads cross might be represented by four polylines A, B, C, D with endpoints coinciding where the bridge is. How would you represent the fact that A joins C and B joins D but A does not join B/D and B does not join A/C?
View 2 Replies View RelatedAutoCAD Civil 3D :: Offset FG In Profile To Represent Pipe At Constant Cover?
Aug 10, 2011I know it can be done usign Pipe networks and feature lines and a massive waste of time.. But I just want ot offset my FG to show a line constant offset. Can this be done? If so how?
Win 7 64bit
16 Gigs Ram
Intel i7 870
Quadro fx1800
C3D 2011/2012
ASUS Custom
Dual 24 Phillips screens
AutoCAD Inventor :: How To Represent Parts List And Ballooning As Different Single Instances
Mar 2, 2012I am wondering when in the idw and have multiple parts some the same and some different. I would like to distinguish between each part as a different part or balloned so they all have a different ref number.
example: have part A and part B and part C
part A has three different instances in the iam
part B has two
part C has four
How do I represent them in parts list and ballooning as different single instances?
part A- ballooned like- 1, 2, 3
part B- ballooned 4,5
part C- ballooned 6,7,8,9
AutoCAD 2010 :: Layer Manager Keep Loosing Icons That Represent Function?
Feb 14, 2012Layer manager keep loosing the icons that represent a function. When you open layer manager, there are some icons on top of the layer manager page, one functions as make layer current, the other one to create a new layer & so on. these icons after a few time that we use layer command they all disappear, the only way to fix it is to close autocad & open it again. Of course if we use classic layer manager then things are ok but classic layer manage rhas uts own problems & limitations also.
My own guess is that the commad "layer" which invoke layer manager has memory leak, & when it is used a few time basically makes your system works on less memory resources & the only way to fix it is to abort the operation & start every thing all over again.
AutoCAD Dynamic Blocks :: When Creating DBlock - What Does Angle Represent In Rotation Parameter
Jan 9, 2013Just exactly what does "Angle" represent when placing a "Rotation Parameter" in a DBlock?
I've tried a bunch of diff angles and haven't noticed a difference. I'm trying to figure out just what effect diff values would have. I thought that maybe when rotating the block instance, I'd only be able rotate it "so far" (270 degrees in the example I've shown). But it still went well beyond that.
AutoCAD Map 3D :: GIS Data - Feature Was Not Saved In The Target Feature Source
Jun 16, 2011I have been working with some GIS data in the form of SHP files in autocad map 3D 2011. On one of my layers I have started getting "Feature was not saved in the target feature source" when I try to check in my data. In total there are 308 errors in the data table, all of which were features I deleted. They all have a featID of null and I cannot remove them from the data table. I need to fix these errors without going back and starting over.
View 4 Replies View RelatedIllustrator :: CC - How To Represent Florescent Colors
Jan 27, 2014Win 7 X64
Illustrator CC x64
How does one represent florescent colors within Illustrator?The final output will be a multi-color sticker.
If I use the eye dropper tool and pick color from a florescent image Illustrator does seem to retain the attributes of being florescent.
AutoCAD Map 3D :: Feature Labeling - Obscure Feature Symbols
Jul 24, 2012I am running Autodesk Map3D 2012 and I need to label my feature points no matter if they overlap or not.The Map3D documention refers to a check box that will allow what I believe I need- but I cannot find the checkbox in the style editor. Here's a clip from the Autocad documentation:
To allow labels to obscure points on the selected layer..In the Display Manager , select the point layer. Click the Style button.In the Style Editor, click Allow Other Labels To Obscure Feature Symbols On This Layer.
Premiere Pro :: CC Audio Levels Do Not Represent Reality
Feb 22, 2014I have a strange issue with PP CC which did not occur on CS6. The audio levels are slightly altered. This issue is clear if I compare them through Audition or Vegas Pro, when they are not altered.
For example, if I have a video with a soundtrack, and I enter another audio clip in another track for vocals, the vocals are lower then they actually are (like -12 instead of -6). It becomes evident when I open the sequence in Audition, where the levels are fine. What's happening? I really need to work with precise levels.
Edge Animate CC :: Import A Sequence Of Images That Represent An Object Spinning
Jan 2, 2013I am looking for a way to import a sequence of images that represent an object spinning. I'd like to be able to import these onto the timeline and have it play thru the images by turning them on/off at the correct time. I basically want to do the same way that you can do in Flash when importing an image sequence.
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Represent Bottomless Arch (arch Span)
Mar 14, 2012How to represent a bottomless arch (arch span)? I can make a horizontal arch pipe, but I only need the top half. I also thought about building a corridor.
We do have a storm drain system running perpendicular above it and need to show the arch as a crossing. Corridor would work but I think I would prefer a pipe network-type solution.
AutoCad :: Sketch Dotted Line To Represent Hidden Line?
Feb 8, 2013I need to change a solid line in a drawing to a dotted line to indicate that it is a hidden line. I know I should use Modify/Properties, I just don't know how to import the dotted line into the properties box.
View 5 Replies View RelatedPhotoshop :: Use The Sharpen Feature And The Unsharp Mask Feature?
Nov 24, 2003I like to use the sharpen feature and the unsharp mask feature but haven't gotten very good at it. Mostly I'm wondering if there is a way to calibrate the sharpen function so that it doesn't sharpen quite so much each time I click it.
View 2 Replies View Related