3ds Max :: Walkthrough Mode Is Stuttering In 2012
Aug 13, 2011
Navigating in max 2012 using walk through mode is not smooth at all, even on a new scene with just a few teapots. It does not update in between and jumps to the end position when i let go of keys. On the same system running max 2009, all is well. Steering wheel is also acting strange. Usual navigation is fine.
Problem exists with both progressive display and realistic mode turned off. The place where i work has computers mainly running on GTX 1GB cards but two of them are on quadro 560 256MB and they too are not much better. HF2 is installed
View 3 Replies
ADVERTISEMENT
Feb 13, 2011
when I activate walkthrough mode it's stuck in vertical rotation. ie I can only look up and down and not left or right. it only gives a keyboard shortcut which doesn nothing. How to revert this back to normal?
View 1 Replies
View Related
Oct 1, 2012
I have a clip that play perfectly fine in my timeline. When I export it, either as a Quicktime or image sequence, the playback stutters every few seconds; basically it double prints a frame every few seconds or something. It's extremely annoying and preventing me from a client delivery in the morning.
View 3 Replies
View Related
Jun 18, 2012
How do I convert to CMYK mode? It is a requirement for a banner I need to get printed.
I go to Image->Mode and select a CMYK profile but it just prints an error'Destinatin Profile is not for FGB color Space' when I press OK.
View 1 Replies
View Related
Mar 7, 2012
I'm working with 2012 for the first time. I'm modeling a rough mass model of a building made of boxes for walls, floor and so on.
As I'm used to, when in Visual Style 'Wireframe' I click on a box and get to see 4 quadradric and 4 triangular grips on the base of the box plus 1 on top to change the height. This is as it always was.
NOW if I change to Visual Style 'Realistic', the grips on the back side are hidden behind the box as well as behind other boxes. Only the grips in front will be visible. No way to get a grip on a box on a side where it touches another.
Even more puzzling is the behaviour of the grips in Visual Style 'X-Ray': the grips will show, but cannot be touched. Instead, an object in front might be selected.
What can I do to make the grips work the old fashioned way - that is that they will be visible and 'manipulateable' on selected objects in all shade modes?
View 9 Replies
View Related
May 22, 2012
Is it possible to set the blending mode or the opacity settings formultiple layers all at once? Ideally I'd like to select multiple layersand change the settings for all of them at once, but I can't seem to figureout a way to do this, so I think it doesn't exist?
Is this something other people would like to be able to do?
View 1 Replies
View Related
Oct 26, 2011
Does AutoCAD Architecture 2012 have a single drawing mode?
View 2 Replies
View Related
Nov 1, 2011
I have noticed on two machines that the SAP of Soft 2012 results on some odd offsets when trying to pick a vertex in paint weights mode. Apply a simple envelope and then go to solo and select vertex to see the offset from where your mouse arrow is and the vertex it highlights. Worked fine until the SAP update.
This has occurred on two separate machines. How/where do we submit a bug report?
View 3 Replies
View Related
Aug 17, 2011
I have found that with windows 7 64 bit (not sure about other versions) when inventor 2012 pro is installed, it causes windows safe mode to reboot at logon screen after like 3-4 seconds. I have found the cause to be a window service that it inventor installs called "Autodesk Moldflow Inventor Tool Suite Integration 2012 Job Manager". I disable this service via "msconfig" tool and windows safe mode works ok.
View 9 Replies
View Related
Jan 24, 2012
Is it possible to change the direction the camera is looking when making a walkthrough?
For example, is it possible to have the walkthrough move along the side of a building, but have the camera facing the building?Basically, If it was actaully a person walking, they would be walking sideways.
View 4 Replies
View Related
May 1, 2012
How to get single day lighting working in a walkthrough? I've tried just setting the lighting to that but it won't render as a proper walkthrough animation (just saves as a 1 second thing). Everything was fixed when I turned the lighting back to a fixed time though.
View 3 Replies
View Related
Dec 19, 2012
Im trying to use walkthrough while modeling the inside of a building. I used to just click and hold down on "pan view" until walkthrough would come up. Now It doesnt, I went into customize user interface and assigned the walkthrough a different hot key and moved it into the top bar right beside where "Mirror" is and it still wouldnt work even if I clicked on it. I tried up arrow as well and im not sure hwo to get it to work.
View 6 Replies
View Related
Jan 10, 2014
Everytime when I try to export a view or walkthrough in revit 2013, I get a blank image or avi. I do nothing specia. I just use the standard settings that revit has, the same way I did in revit 2012, where it works.
View 1 Replies
View Related
Sep 29, 2011
I am using Revit 2012 and I am trying to do a walkthrough down a street. I had 1000 frames and 5 fps because we want it to move really slow... but with 5 fps it is choppy. So I tried adding more frames but when I export it I can an error message when I try to play the file saying "Windows Media Player encountered a problem while playing the file".
I am not sure what I am doing wrong.. is there a maximum amount of frames you can use?
View 2 Replies
View Related
Nov 11, 2012
I am trying to control the height of the camera for a walkthrough so that I can go up stairs. I know that I can activate the "Mini Tour Building Wheel" and can do it that way but it is very clunky to use and I don't always get the right angles. Is there a simple way to control each key frame's heights like you normally would a camera (eye and target elevations)?
View 1 Replies
View Related
May 10, 2011
I'm relativly new to 3ds and have built a model which I now need to walkthrough and save the file as a video file. I have used the walthrough assistant and created 4000 image (jpeg) files. I have loaded into RAM player and it runs, although only takes 50% of the images in. Each image file is only 236kb and renders at 1024 x614. I try to save the file as an .avi file and the system immediatly crashes with the explanation "Not responding". Machine spec should be fine with 8gig of RAM,Intel Xeon quad 2.66, 64bit win 7 and Nvidia Quadro FX4800
My questions are:
"What is the best way to create a walkthrough as a video file to be shown on wide screen TV's?"
"Is there a maximum amount of memory RAM player can use?"
"Should I use RAM player at all and just save as an AVI?, this has been tried but if I try the full 4000 frames it also crashes and fails to save".
View 8 Replies
View Related
Feb 10, 2013
I have a project with a number of mpg files in it. These mpg files were created using X3 from mts files.
I have done this many, many times. I created an mpg a few weeks ago without problems. Now, all of a sudden, I try to make the same mpg files and the exported video will stutter in places. It doesn't matter how many times I render the same project, the video stutters in the same exact spot. Like I said, I've done this many, many times and never had this problem.
what may have changed or been installed on my computer recently to cause this? I even reinstalled X3 with no luck.
View 5 Replies
View Related
Dec 13, 2012
I own a copy of Corel Video Studio Pro X3. Since installing the patches for it, the sound stutters on the finished videos that I make. Original files are fine. I had this problem on the previous computer I used this program with, and after searching this forum, found a hotfix for it. Unfortunately the hotfix link is no longer working.
View 3 Replies
View Related
Jan 26, 2009
I've just rebuilt my PC with the following specs:
CPU - Intel I7 920 2.66ghz Quad Core
Mobo - Asus P6T Deluxe OC Palm Edition
RAM - 6Gb G.Skill DDR3 PC3-12800 (1600mhz) (9-9-9-24) RAM in Triple Channel setup
GPU - BFG nVidia GeForce GTX280 1024mb OC2 Edition
HDDs - Seagate 500GB 32mb Cache SATA II Main drive, Western Digital 500GB 16mb Cache SATA
II Documents Drive, Western Digital 320GB 16mb Cache SATA II Photoshop Scratch Disk
PSU - Hyper Type M 880W
Case - Coolermaster Cosmos
I am using Windows XP Pro x64 Edition and the 64bit version of CS4.
I'm quite pleased with the system so far, it pretty much obliterates everything you throw at it without blinking an eye. However, I am absolutely stumped as to why the in the world Photoshop CS4 (and CS3) are running as if my system is 10 years old...
So here's what's happening:
After rebuilding my system with the above specs I have installed Photoshop CS4 and have opened up a painting I have been working on. I zoom in and the screen redraw is sickeningly slow. I hold space and drag the canvas to navigate around it, and again the redraw rate is terrible and results in what I can only describe as more like a render in something like 3D Max than simply dragging the canvas in Photoshop. While the brush control is smooth for the most part, when painting using several quick strokes I get a lot of lag after a little while which manifests as my brush strokes not registering and then all of a sudden happening at once.
Now, I have CS4 installed on my other system at my parents house which has the following specs:
Intel Core2Duo E6750 2.66ghz (OCed to 3.1ghz) CPU
Asus P5KE Deluxe Motherboard
8GB OCZ DDR2 800mhz RAM
BFG nVidia GeForce 9600 GT OC2 Edition
2x Seagate 250gb HDDs (Not in RAID)
And with this system, Photoshop CS4 works great with the only exception being the OpenGL support not being supported.
I have updated all of the drivers on this i7 system. I've even reinstalled older versions of the video card driver and still I get lag. I've uninstalled Nod32 Antivirus, Comodo Firewall, stopped Diskeeper from automatically defragging and ended lots of uneeded processes but I still get this problem. I've uninstalled my Wacom Tablet drivers and used the mouse in Photoshop and that hasn't helped. I've reinstalled 3 older versions of Wacom Drivers also to no avail.
I've even formatted and tried a fresh install.
Also, I tried reinstalling Photoshop CS3 and get similar problems. Only in CS3 there is no issue with the redraw rate, only it lags all of a sudden while trying to navigate an image with space held down and dragging on the mouse or wacom pen (or a blank canvas for that matter) then it will freeze the images movement then suddenly jump.
View 15 Replies
View Related
Feb 25, 2014
CS6 - 6.0.5
Win7 - 64bit - updated
24gb ram
RAID SATA with SSD scratch disk
Nvidia GTX 570 - newest driver, but was seeing same stuttering with last driver (that had previously worked fine)
The playhead in PP CS6 is stuttering at a rate of about ~.75 seconds. It jumps or skips, but continues to play mp3 audio clip perfectly. It does cause any video to skip in perfect time with the stuttering playhead. Strangely, it does not cause the audio portion of the video clip to stutter.
It does not require a specific type of video or audio to stutter... meaning, it will stutter even when you start a new file and add only a Color Matte as the only item in the whole project.
Projects that once worked perfectly now stutter at this same rate.
It is sometimes resolved by rebooting the computer. I have tried to compare the Windows Processes during times when it stuttered and times it didn't, but have seen nothing that, when force exited, solves the issue.
I also switched the scratch disk to different disks to eliminate this possibility.
View 8 Replies
View Related
Jan 15, 2013
I am having trouble with stuttering video/audio while playing WMV files in VS Pro X5 SP1. Any clip which I try to view will stutter on playback (sounds like a scratched/dirty CD). These files play fine in Media Player Classic. Other file formats (e.g. mp4) play fine in VS, it is just WMV files that are doing this. I don't get any errors, it just doesn't playback correctly.
The WMV files were created within this installation of VS Pro X5 SP1. The original source varies. I've started with .MTS files from my Canon camcorder SD card (reader built into PC), or from mp4 files which I also created from this installation of VS. When I share the files, I get no errors. I've had it happpen with 3 minute files, and with 11 second files.
One example file that does this is:
file size 3,405 KB
Duration 11.064 seconds
Data rate 2481 kdps
Video: Windows Media Video 9
24 bits, 1280x720, 29.970 frames/sec
Audio: Windows Media Audio 9.2
44.100 KHz, 16 bits, Stereo
Aspect ratio 1.78:1.0
Is editable: yes
Project settings are:
NTSC drop frame (29.97 fps)
Microsoft AVI files
24 bits, 720 x 480, 29.97 fps
Lower Field First
MJPEG Compressor
PCM, 44.100 kHz, 16 Bit, Stereo
I've also tried changing the Project settings to this, but the WMV file still comes out as 44.1 and the same issue occurs:
NTSC drop frame (29.97 fps)
Microsoft AVI files
24 bits, 720 x 480, 29.97 fps
Lower Field First
MJPEG Compressor
PCM, 48.000 kHz, 16 Bit, Stereo
Not sure if this is related or not, but when I installed the latest version of VS Pro X5, I started having trouble with windows media player. At the moment, WMP won't play DVD's or WMV files because it says it doesn't have the codec. I'm running WPM 11 on Win XP and it is the most current version.
View 2 Replies
View Related
Apr 13, 2013
I have Canon 60d original footage shot at 1080p 25. The clip is only 9-1/2 sec long. When I play the clip straight out of my pc folder inside VLC the clip is smooth. The moment I import the clip into VS proX5 timeline and straight away, share / create video file / AVCHD / 1920x1080p preset, VS introduces 4 dreaded stutter problems into the render finished product which is very noticeable and ugly to watch.. I am in PAL land and VS was installed to PAL. I have also tried the WMV hd1080p preset and mpeg-4 and the results where just as disappointing.
View 10 Replies
View Related
Sep 28, 2013
I tried reimporting the video and translating it to another format, I've rendered it fully, and deleted temp files and re-rendered it. I rebuilt the video from scratch in a new sequence created from the clip (all clips were screencaptured using Camstudio so they're the same exact format as each other.
But I still have constant problems with videos not playing properly in preview. The last time I had this problem, they rendered that way too. When I hit the spacebar to view the video, it shows a bit of the video, then rewinds and plays the same section over and over, moving a little further forward each time. Basically "rubberbanding".
It's Premiere Pro CS 5.5.2
Win 7 64
No third party codecs.
I have plenty of hard drive space and 8 gb of ram. I do have browsers open which use a lot of memory, but all the other clips are working so that doesn't seem like it should be an issue.I'm not using any kinds of plugins or third-party things.
Shutting other memory hogging programs and restarting Premiere.Things that seem to hurt: using the time slider to increase or decrease speed of the video.
View 9 Replies
View Related
Aug 9, 2012
I've cut a 23.98 1080HD teaser via imported R3D source. Brought the source in at half res, so a little bigger than 1080HD however have been processing re-sizes in SoftFX.
The program plays perfectly fine in smoke, but I'm getting stuttering playback anytime I export a Quicktime. It's a constant, intermittent stutter every second or so.
View 2 Replies
View Related
May 4, 2011
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
The manufacturer of the flip camera is suggesting that since the footage can play fine with the camera program (Arcsoft Media Impression) the problem seems to be related to the player codec on my computer. They suggested that I download the latest K-Lite Codec Pack to see if that would resolve the problem.
View 2 Replies
View Related
May 24, 2011
This is a new fault which has appeared with Corel Pro x3. When I play clips on the overlay tracks as a project they play faultlessly. When I play them as a clip on any overlay track, there is no sound and it stutters instead of one constant speed. I have installed the program twice now trying to fix this problem. I am editing in Standard Definition. What could be causing this problem? This occurs with all files on the overlay tracks played in clip mode.
My computer is a Pentium (R) D CPU 3.00GHz, 3.25GB of RAM, Windows XP Pro, Intel Motherboard, ATI Radeon HD 5450, 512MB DDR3, IDT Audio. Sony HVR-V1P Pan NVGS400
View 7 Replies
View Related
Nov 3, 2010
I have a new notebook with intel I7 processor, 8 GB memory and 500 GB 7.200 drive. I captured successful the video from my Sony camera, cutted the video, produced a DVD and enjoyed afterwards the video. To back-up the video on a tape normally I generate a video file in my Video Studio x3 (latest version) and transfer it back to the tape on my video camera. This isn't working in the right way due to stuttering after 10-15 minutes transfering back. After restarting the transition the time until stuttering starts is then less then 10 minutes, next time less then 5 minutes.
View 12 Replies
View Related
Apr 24, 2011
I'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
View 14 Replies
View Related
Sep 24, 2012
In the Printer Settings drop down menu both Color Mode and Print Mode are grayed-out. This just happened I cannot think of anything I've done differently.
I'm using OS 10.6.8 and the latest Epson drivers for the 3880. I have re-installed both PS and the Epson drivers. If I print from Acrobat Reader everything seems to work fine, this only is happening in Photoshop CS5.
View 17 Replies
View Related
Mar 14, 2013
“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
View 9 Replies
View Related
Aug 25, 2013
For some reason while in text mode, all letters stay locked in Cap mode. My cap lock key is not on?
View 1 Replies
View Related
