3ds Max :: Tools In 2012 Disappear From Toolbar?
Oct 15, 2011
I was working on a scene and went to select the rotate tool and suddenly all the tools and the entire toolbar was gone! I tried un-checking and re-checking the main toolbar selection but to no avail. I am completely at a loss as to what to do since I can't choose my tools anymore! I put my tools back onto a custom toolbar but I can't find the dropdown box that you can choose what orientation the gizmos use (i.e. local, world,...) Without that toolbar, I really can't do anything and it would be nice to have all the tools back as I can't find half the ones that were there. As you can see in the picture, I put the tools I could find back in.
View 4 Replies
ADVERTISEMENT
Apr 23, 2012
Sometimes on my "Draw" toolbars, all of my icons disappear! Passing the cursor over it, than they reappear! Made same thing in ACAD 2012.
My video card is a NVIDIA Quadro 600 with the latest driver installed.
Win 7 64
16gb RAM
Xeon 3.07
View 2 Replies
View Related
Aug 22, 2012
On some computers I have a problem. The down arrow at the right of the quick access toolbar doesn't show. I checked that my interface is not lock too. So to customize the quick access toolbar I have to use the CUI.
I don't know if it's related, but my customize toolbar (from my partial menu) have to be displayed manually each time I start AutoCAD but not my custom tab in the ribbon.
View 2 Replies
View Related
Aug 6, 2009
Normally I do all of my initial editing in Raw Editor and then save the files to a 16-bit Photshop format file. In Photoshop, all my Nik and PhotoKit filters work fine as well as adjustment layers.
But when I try to use any of the tools, e.g. clone, healing, dodging, burning, all I get is a hand cursor on the photo and I cannot do whatever it is that I want to do with any of the tools. Am I missing something in the setup?
View 3 Replies
View Related
Jan 2, 2013
I am trying to get TOOLS and the object snap toolbar up but my menu bar only has FILE WINDOW.
View 3 Replies
View Related
Nov 3, 2012
I just put in a new Radeon 5770 card (PCI slot 1) into my Mac Pro 2008 Quad Core which is running Photoshop CS3. Now, the cursor (on all tools) disappears when mousing over any open PDS document. In Indesign, the cursor for all tools shows and works - as well as other pragrams.
View 5 Replies
View Related
Jul 6, 2011
What Revit 2012 setting makes walls and floors disappear when rendering is selected?
I have a Revit 8.1 project that renderes the model just fine. When I import it into Revit 2010 it also remders the model but I have to reassign the custom finishes. But when I upgrade it to 2012 and render - the walls and floors are suddenly missing!
See attachment.
View 9 Replies
View Related
May 6, 2011
Maya 2012 new features video shows that craft animation tools is new feature in Maya 2012, but i cannot find it inside Maya 2012, is the plugin integrated with Maya 2012 or need to install it after installation? Should i download craft animation tools for Maya 2012 or ?
View 6 Replies
View Related
Jul 25, 2011
I want to do a short movie with facial animation.
I want to animate 2 bears and 1 human.
Is there any program, to record my face(for the human) and "mix it" with the character?
Or how should I do the Face animation?
View 1 Replies
View Related
Dec 28, 2011
I have used ACAD Lt 2000 for years and it has been fine untill recently. It does not seem to like the new hardware so I am trying the 2012 Lt for 30 days. One thing it is not letting me do is calibrate the digitizer, (a GTCO 3648 Rollup II) I am not even getting a "tools" menu and typing in "CAL" gets me a weird " >> Expression: " in the command line. It shows:
(mouse icon) Menu: Tools > Tablet > Configure
View 6 Replies
View Related
Aug 2, 2012
I'd like to create a new Menu which will contain few custom tools (ie. place text with particular font type, scale and justification)..I tried to import my customized menu from AutoCAD 2007 but that wasn't successful.
View 2 Replies
View Related
Jul 5, 2011
We are using 64bit Windows 7 & Inventor 2012. We got the drawing tools to show up correctly on one machine, but can't get them to show up as an add-in on a second machine. We've uninstalled & re-installed the tools. registarted the tools many times. Nothing seems to be working.
View 9 Replies
View Related
May 3, 2011
How do I disable the layout Tools Contextual tab in Civile3d 2012 so that is does not become active every time I change to Paper Space. I would like the ribbon to stay focused on the HOME tab when in paper space.
View 9 Replies
View Related
Mar 5, 2013
I'm having problem with this tool in maya 2012 it doesn't connect or do the red mark between 2 vertices but in maya 2013 it does the red mark between them but doesn't connect
View 1 Replies
View Related
Dec 19, 2013
I've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
View 6 Replies
View Related
Sep 10, 2012
I instal form SDK User Tools because I need in Inventor Drawing Tools (Revision cloud). I do this install like on website Autodesk show and I didn't get it on ribbon. I do also registry of this plugin but I also didn't get it.
I used Invenbtor 2013 with servce pack.
View 2 Replies
View Related
Nov 25, 2012
i have cs5 suite. last week everything fine in photoshop. this week, only the tools that are showing are available to use. i can not access the tools when i click on the corner of individual tools. i am running version 10.6.8
View 1 Replies
View Related
Jun 18, 2013
How or where I can get the Detail tools that was in the 2013 Tool Palette?
Batt insulation
drywall
Plywood
studs
pretty much everything you need to build a detail. Where are these tools?
View 4 Replies
View Related
Apr 15, 2012
There seems to be way too many tools in the tools panel for me. Many of them I will rarely, if ever use. Is there any way I can rearrange or remove some of them? It would unclutter the screen immensely.
View 8 Replies
View Related
Feb 1, 2012
I have an interactive board with tools (such as pen or eraser) which I want to integrate with the AI. The typical scenario woulld be as follows: the user lifts the pen from the tray, the pen event will me mapped into selecting Pencil Tool from AI toolbar after which the user can add freehand annotations to the AI document.
Is there an API which would allow me to map abailable hardware tools with relevant AI tools? Is there an example which would demonstrate such integration?
View 5 Replies
View Related
Mar 26, 2012
How to get the 'Shape to Block' command to work (under express tools).
It says select object, but no matter what object I select eg. circle, pline or line, it says invalid selection. I am running AutoCAD 2012. Are 'shape' objects somehow different from any other objects?
View 1 Replies
View Related
Aug 12, 2003
I am able to use the menuload command to load the express menu, but when I try to execute one of the express tools. AutoCAD say invalid command, there was something on the website that said to type express tools at the command prompt, but when I do that, too it says invalid command.
View 5 Replies
View Related
Sep 25, 2012
After archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
View 4 Replies
View Related
Mar 29, 2012
Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies
View Related
Jul 11, 2012
I installed express tools with ACADE abd ACAD, some of them don't work, example:
_.sysvdlg Unknown command "SYSVDLG". Press F1 for help.
other commands missing:
arctextx, txt2mtxt,mocoro,dimex,dimin,qlattach
View 4 Replies
View Related
Sep 19, 2012
I have problem with my Autocad 2011,It always showing a message "unable to load acetauto.isp/fasload failed"
View 1 Replies
View Related
Oct 21, 2011
I am using AutoCad Civil 3D 2012, with windows XP, and when I type "extrim" at the command line, I get this:
Command: extrim
"bad argument type: listp #<SUBR @2f9669b0 BONUS_ERROR>"
There are also a few other express tools that when picked from the ribbon menu, do not work either. Now, I have seen elsewhere on the web that in this case, you should make sure there are no search paths set to R14 Bonus tools (which mine aren't), or repair and update express tools from add/remove programs in the control panel. I did this, and the only thing that happened was the numbers after SUBR@ changed.
View 3 Replies
View Related
Jan 5, 2011
My application works with function it acet-ss-drag-moves of Express Tools. Can I distribute AutoCAD Express Tools with the program of Installation of my application?
This to guarantee that Express Tools will be with the user's AutoCAD. If this is possible what document should I use?
View 1 Replies
View Related
Mar 10, 2011
I had express tools loaded, but now I have a problem. I try downloading Auto CAD True View, but did not get it to work, since then I have been getting unknown Command "txt2mtxt" now none of my commands work. I try auto cad repair from the install program and it still does not work.
View 1 Replies
View Related
Sep 30, 2013
Sometime when I am using my photoshop to work on a webdesign project, my layers disappear. Not in my composition but in the layers window.
I can make them come back when I use the select tool with Ctrl + click, but only one by one. The only way to avoid this problem is to close my psd file and to reopen it, it is a little bit swelling...
how to solve it?My conf : Mac Book Pro no-retina 15" with BootCamp Windows 8, Photoshop CC.
View 7 Replies
View Related
Mar 13, 2013
I used Photoshop CS6 without problem until now. Now I dont have enought ram , still cpu processing, freezing and delete my UI layout. I cant work with this I have Core2Quad, 8GB ram, GeForce 250 GTS with Windows 8. Latest driver I also tried beta version and older version. Clean settings, disable opengl, reinstal photoshop, install 32 bit of photoshop I tried everything. All my programs (AE, Premiere, Softimage) works perfect. I dont use any plugins. Also tried compatibility mode. Now it looks that I have to reinstall windows.
View 14 Replies
View Related