Xara :: How To Link To Different Sections Of Large Photograph To Different Popup Text
Nov 27, 2013
Im using sing Designer Pro X9, I have a large photograph and I would like to make links in different sections in the photograph so when the cursor goes over a section a popup layer with text would appear and go away when cursor is moved away again. I have tried putting layers over it but I cant get more than one layer to work.
View 2 Replies
ADVERTISEMENT
Aug 23, 2011
A link on page 1 opens page 3. Is there anyway to have this link also open a popup layer on page 3 when it opens the page?
View 3 Replies
View Related
Nov 8, 2011
I have a structural model linked into my architectural and I cannot seem to cut the link in sections. All I can see is the 'elevation' of the link whilst my architectural cuts. I have the link set as by host view and the view extents correct.
View 4 Replies
View Related
Aug 16, 2011
I'm using Xara Xtreme Pro 5.1.2
I have a portrait photograph that is fine in most respects but there is a shiny patch (light reflection) on the forehead and on the nose.
Is there an effective way to remove or tone down the shine without interfering with the rest of the photograph?
View 2 Replies
View Related
Aug 22, 2006
I have a flame image. And in between all the flames was black. I made them all white to help me out a bit but now i don't know how to delete ALL the white.
going around all the flames with a lasso?
View 4 Replies
View Related
Jan 1, 2012
I have an image sized 20" x 24". I just have a standard 8.5" x 11" printer. Can I print the image in sections? If so, how?I did this with a PDF document once.
View 2 Replies
View Related
Feb 23, 2010
In sections the scale of the hatch appears very large. Attempting to change the scale via /properties/ material/ cut pattern/ fill pattern/ edit/ import/ change scale/... has no effect!
View 2 Replies
View Related
Apr 22, 2012
Is there a way to zoom into sections of large images to iWarp them without cropping, iWarping and then copying back over the original image? It's just the tool doesn't allow you to zoom in so it can be difficult to see what you are doing sometimes and performing localised iwarping to requirement necessitates doing this + the iWarp sometimes creates minor differences in the edge of the cropped layer creating problems when trying to re-add it
View 2 Replies
View Related
Feb 9, 2012
Is it possible to blur sections of an image?
I want to do this with scans of legal documents like my driver's lic.
I want the photo to be in focus but the sensitive info blurred.
View 9 Replies
View Related
May 8, 2011
I am looking to extract natural noise from a photographs material and create a black and white layer out of it, but I am new to photoshop and unsure how to proceed with this.
For example, here is a photograph of a hard plastic gun.
I have seen on forums where users will find a good reference image and use it to create a new black and white noise picture utilizing the reference.
For instance the hard plastic noise from the gun, might look like this once extracted and done correctly.
how to produce something such as this?
View 2 Replies
View Related
May 2, 2011
My company just upgraded from CorelDraw 12 to 15. One thing that's especially annoying is every time we change object sizes and press return instead of applying the changes we get an annoying Text Attributes box twice before it will change.
View 14 Replies
View Related
Feb 19, 2014
How do I wrap text in a photograph?
View 2 Replies
View Related
Jun 25, 2011
I have managed to create a hyperlink from an image, to another page on my site. For some reason I am not able to create a link for some other images and I do not know why. (Designer Pro 6). I have used the same settings via link but as said this does not work? Do images have to be a certian format for hyperlinks to work?
View 3 Replies
View Related
Sep 7, 2011
I am using xara xtreme 4, i always used it to import large A1 size pdf files to resize them with xara on A4 page. I am trying to import now a 50 mb pdf file, after asking me if i need to optimize for editing i click import, it shows that it is converting the document then it asks me if i need to merge or insert to a new page i click merge and finally nothing shows on my sheet, still empty!
is there a better way to resize that pdf file?
View 9 Replies
View Related
Jun 25, 2010
how do you change the tool bar buttons to small buttons? The options are all greyed out! I am old but not that blind yet. This is a work stoppage, and abandon software problem for me.
View 9 Replies
View Related
Jan 26, 2011
I love designing vehicle wraps in XD Pro6 but what can I do to export a large image. If I design at half scale then try to export at 200 dpi it crashes and says out of memory.
Have a quad core with 8gb ram Win7 64 bit.
View 8 Replies
View Related
Sep 24, 2012
My wife is designing in Xara pro and has 1700 fonts she wants to be able to use.How can she organize them into like 20 categories and have access to them in Xara?
View 9 Replies
View Related
Jan 23, 2014
I have a photograph of a page of a book. The bottom and sides are straight, but the top is curved. What tool/plugin can I use to straighten the top edge and the text?
I'm sure there must be one, but there are so many different plugins and I have limited experience with Paint.Net that I am a bit lost!
View 1 Replies
View Related
Sep 8, 2011
For some reason I am not able to link my accordion widget to other pages within my web site. The pre-existing link to xara.com works fine. When I remove it and put in my own link (and follow protocols within the linking function in the web properties box) it simple won't work.
View 2 Replies
View Related
Jun 5, 2012
I am about to venture into creating a poster using a picture that I haven't gotten yet.
I'm wondering what I will need to do in order to get a reasonably non-pixelated poster when enlarging a picture from a smaller size.
Is the most important feature of the picture it's resolution? I know at times I've tried enlarging pictures and they are pretty pixelated after the process. I'm guessing that resolution is the key but I would love to hear from the experts that do this on a regular basis.
I know some of you have made building size signs, are these from pictures or are they from vector creations? How do you get these to be so clear when enlarging?
View 9 Replies
View Related
Dec 19, 2013
I have a client who asked me to create artwork for a banner she is printing for a trade show. The banner is 19.5 FEET long and almost 8 feet high. I have designed the banner as 6.5x2.6ft with the intent of then dividing it into 9 equal parts which I would blow up to 6.5x2.6 and send off to the printer. So far so good. The problem is that the segments are still so large that when I try to export them as PDFs, I am running out of memory. I tried doing them as jpegs, but when I change the resolution for export to 300dpi, nothing changes- the number of pixels x umber of pixels doesn't increase. My client needs this artwork off to her printer asap and I am at a complete loss.
View 4 Replies
View Related
Nov 1, 2013
i have been trying for the past hour to export these two files as pdfs for large format print. everything exports fine except the gold trophy design, how to export these for use for large format solvent printing, i normally dont have a problem but this golden shield vector appears to be the problem.
View 5 Replies
View Related
Apr 20, 2012
I have 2 to 6 tables per drawing, each at a maximum of 48 cells. I linked them through the special paste and expended them so each cell is 6" Wide and 1" Tall (in model space) and seen through a viewport at 2" = 1'-0" (so 1" wide by .167" tall). The text is noticeably fuzzy and I'm trying to clear it up without going back to the Tables (the reformatting of the Tables already spent an extra 2 hours on one of the 11 assignments).
View 0 Replies
View Related
Jul 16, 2013
Running PSE 9 under Mac Snow Leopard.
I have a family photo including many text layers. I'm trying to edit the text in a selected large multi-line text layer. I'm following the steps from the appropriate PSE article, but I always end up creating a new layer and the red/green no-go/go option. I thought I should just be able to double-click the text layer and start editing.
View 6 Replies
View Related
Apr 11, 2014
I have a document that is separated into categories of information, (i.e. radio stations, newspapers, network programs, cable programs, etc.). I tried to add section markers to each page where a new section begins. But if I make edits and add information before, and a new page is created, the section marker stays on the same page and doesn't move with the beginning of the section itself. I am using a primary text frame with smart text reflow, which I assume has something to do with it. I tried changing the end of story option to "End of Section." I also checked preserve facing pages (because a section needs to start on the right page). I thought that this would make it enough text was added that a new page was created before a section marker, the new page would be created before the section marker and the section marker would move its content.
So, for example,
Section 1 (Radio Stations)
first page has header that says "Radio Stations," followed by entries of radio stations
Section 2 (Newspapers)
first page has header that says "Newspapers", followed by entries of newspapers
So say section 1 starts on page 15, and section 2 starts on page 29. I need to add a few radio stations on any page in section 1, let's say 22. I add some information, text after flows into next pages, but the section 2 marker stays on page 29 even after the first page with header "Newspapers" has now moved to page 31.
View 4 Replies
View Related
Dec 20, 2013
I have created a polar grid in illustrator with many sections. I want to be able to enter text in every section of the grid and not just along the path lines. How do i create text frames so each grid section within the polar grid is separate and therefore allows me to click on it and enter text. I would also like to change the colour of all the polar grid sections individually. I think it might have something to do with threaded text but not sure.
View 17 Replies
View Related
Sep 19, 2012
This may be confusing, but I wonder if there's any way to link an object to a certain text place or paragraph in a text frame, so if you edit the text somewhere, the "linked" image will move up/down with its associated text? That is, the object being a part of the text flow.
View 4 Replies
View Related
Jun 28, 2012
I want to extract sampled sections to a text file like "Station,Offset,Elevation" by C#.net.Something like tplate output in land companion, which functions should I have access to do above?
View 5 Replies
View Related
Oct 4, 2011
I am completely new to the forum and to Autocad. I am using version 2011.
I am working with irregular solids and after I SECTION them, I would like to export to a text file the data points that make up the perimeter of the sections.
Ideally, I would like to do it from the command line, but that's a secondary goal, first of all I would like to know how to do it.
View 0 Replies
View Related
Jun 9, 2010
I am using Civil3D 2010. I am trying to export the offset/elevation data from my cross sections to a text file or excel file so i can paste the info into another program. so far i've been labeling the offset/elevation info on the section and typing it into excel by hand.
View 9 Replies
View Related
Jul 17, 2013
Is there a way to make non rectangular text boxes in Xara designer? Say I have a star shaped object in the page and I want the text INSIDE the star.
Also, is there a way to color fill a text box?
View 9 Replies
View Related