Xara :: How To Enlarge With Constrained Proportions
Jul 17, 2013
Possible to produce a piece of text, say a single word in XDP X9 and the try to stretch the height you simple get an increase in size with proportions constrained? Sometime you want to stretch the height and I already know how to enlarge with constrained proportions as I've been doing it for years.I can't find any useful tick box to stop this from happening and the only way round it I can find is to convert to editable shapes.
View 7 Replies
ADVERTISEMENT
May 9, 2008
How do I constrain crop to a certain height/width ration (say 3:4) and NOT do any resampling of the image?
For example, I have an image 2304x3072 and I want to crop it so that the result still has the 3:4 aspect ratio, e.g. the result may be 300:400 or 750:1000 or something in between. But I don't want to do resampling.
View 3 Replies
View Related
Aug 23, 2012
Using the crop tool I can only make selection marquees that are constrained as if I am clicking a corner handle. When the selction is finished I have no side handles only four corner handles.
View 2 Replies
View Related
Jan 13, 2012
I'm a new user of Paint Shop Pro X4 and have come across from Photoshop Elements 9.
One feature I can't seem to find, if it exists at all, even though it really should, is the ability to move a layer while constraining it horizontally or vertically.
In PSE/PS you can hold down the Shift key when dragging layers to keep it on the X or Y axis allowing the layer to be positioned without it drifting in the wrong direction.
Can PSP X4 do this, and if so, how?
View 3 Replies
View Related
Aug 30, 2013
I made this sketch and the two marked dimensions were added when i pressed the Automatic Dimension and Constraints tool, because, in spite of all the dimensions i put manually, the sketch wasn't fully constrained.
Why wasn't it? it seems to me that i gave all the necessary information.
View 5 Replies
View Related
Dec 28, 2012
I need to have one assembly constrained to three places on along a bar. Should I ( and how would I?) open another assembly drawing, insert said bar and some how insert those three assemblies into the drawing?
View 7 Replies
View Related
Mar 27, 2012
Is there a way to list what items are constrained to levels? i need to remove a couple of annoying levels but have a feeling that walls, roofs, families, etc may be constrained to the levels that I need to delete.
I tried doing a multi-category schedule but I think I need to do one for doors, windows, etc. I thought I read somewhere that this feature was available in Revit 2012.
View 1 Replies
View Related
Aug 10, 2010
It seems there is a problem with Inventor 3D Sketching. I have a 3D Sketch, with 1 fully constrained vertical line, and another vertical line with an open length. I then join the 2 lines with a line on the top. When I give the top line an angle dimension, I expect it to be fully constrained, but it appears not as the line remains "green".
See attached file.
Windows 7
Inventor Suite 2011
Dell Precision M6400
Intel(R) Core(TM) Duo CPU 2.40GHz
RAM 12 GB
NVIDIA Quadro FX 3700M
Spatial Feedom - Astroid
View 7 Replies
View Related
Mar 12, 2012
i am beginer in Assembly,How i come to know whether my assembly is fully constrained or not?
View 2 Replies
View Related
Jul 1, 2010
When I hold down shift to scale an object or image to keep the proportions constrained, it does not work. This has only recently started to happen and it also happens on photoshop.
I don't have entourage running, which I read could be a culprit.
Would I need to reinstall my CS2?
I am using a Mac Powerbook G4, OSX 10.4.11 Adobe CS2
View 6 Replies
View Related
Jan 29, 2010
So I open up Illustrator CS4 today and I start working with a simple file. I use my shift key to proportionally enlarge something, and it doesn't work. I can use shift to type upper case within Illustrator, but its not allowing me to size things proportionally. I searched within many option and menus and googled this problems without any resolution.
View 9 Replies
View Related
Nov 6, 2008
This assembly has piping parts that are not filly constrained yet will not move. For example a Tee that has only its centerline mated to a pipe centerline acts like it is fully constrained or grounded. I can demote those parts into a sub-assembly and then they behave normally. I'm wondering if this assembly has some kind of bug, even though no errors are reported and rebuild all doesn't work. Is there any kind of other program that goes through an assembly file and cleans up bugs? The pack n go is 65 MB.
View 9 Replies
View Related
Oct 16, 2013
I'm trying to constrain a length of ACME threaded rod to a nut so that when the rod is spun or threaded it shows it traveling into the nut as it will be grounded. I would like it to work as a driven assembly or if I was to turn or spin the rod by the mouse. I've reseached this for the last 2 days and can not spend any more time on it so time to ask the experts.
View 4 Replies
View Related
Nov 1, 2012
I'm having trouble extruding a fully constrained sketch. The sketch is a cross-section of a hollow cylinder that is splined on the inside surface (see attached part file). The line segments that create these splines seem to be grouped together because moving one line moves the others, however the sketch will not extrude.
I can't use the coincident constraint button to group the lines because they don't separate from each other. I also tried to use the close loop button but was unable to select all the necessary lines.
how I can extrude this sketch or make an equivalent sketch that is easier to extrude
View 8 Replies
View Related
Nov 9, 2013
I am trying to constrain a point(on a different part) to the sketch(yellow) on the inside surface of the triangle part. If I try the constraint like how it is now, it only allows me to select one segment, not the entire triangular shaped line. It would work if inventor saw the sketch as one single element, but it of course does not. I tried making a 3d sketch of the inner surface and then constraining to that, but it did not work.
View 3 Replies
View Related
Mar 5, 2013
how to adjust Genius pen tablet i 608 to Photoshop CS3, When I put a CD on my tablet and draw a circle around it, I get an elipse in photoshop. I have tried by setting the pen area in my latest Genius driver to match my paper size in Ps but that didn't work. I need to set up that ratio or the proportions to match so my drawings would not be skewed.
View 2 Replies
View Related
Oct 28, 2006
Does anyone know how I can crop an image, but keep the original proportions of the image? Is there a way to crop and manually set the crop size?
View 3 Replies
View Related
Jul 19, 2007
I wonder if anyone can help me out with this. When I try to transform something I use the shift key while transforming to constrain the proportions but for some reason it has stopped working and I can not figure out why and how to fix it.
View 2 Replies
View Related
Oct 29, 2011
Have you ever had shift not work when trying to constrain proportions while scaling in illustrator CS5? I have seen some other posts on this and they mentioned quitting entourage or disabling your firewall as a fix. I am not running Entourage nor am behind a firewall. I also reset my preferences.
View 4 Replies
View Related
Nov 17, 2012
New user of Elements 10. I am trying to change an image size but NOT keep the current height/width ratio.
When I go into the Image Size option box, the Constrain proportions box is ticked, so when I change the width, the height automatically alters to a new figure (say 100 x 50 becomes 200 x 100)
What I need to do is to have different sizes (say 100 x 50 to become 200 x 160). I realise that the image will look wrong, but this is not a problem, in fact it is what I am trying to achieve.
What do I have to do to be able to uncheck this option within the Image Resize dialogue box.
In a previous version of Photoshop, that I had access to, this was achieved by simply un-ticking the option.
View 2 Replies
View Related
Jul 19, 2013
I read what is in the picture in a skill builder, which is:
[URL]
When is a sketch that is copied to another part file linked to the source file?
I tried it, i copied part of a sketch, some lines, from one part file into a sketch in another part file and there was no link
View 4 Replies
View Related
Oct 9, 2013
How do I re activate the "Constrain Proportions" feature when it is "greyed out".
Trying to re-size a photo in old Photoshop version with the magnifying glass logo.
View 2 Replies
View Related
May 16, 2012
I was given an image with these dimensions:
w: 13.89 x h: 5.56 inches.
I'm being asked to make it fit these dimensions:
w: 8.5 x h: 5.47 inches
How to achieve this without the picture looking stretched, in terms of it's height. Everything looks constrained when you just do the image or canvas resize.
View 6 Replies
View Related
Dec 27, 2011
How to make this image visibly more clear and perfect. But don't change its proportions, the size should be exactly the same as I'm going to use it for facebook cover.
View 9 Replies
View Related
Feb 17, 2013
I know very little about setting image sizes in LR and usually use Pixrl. I have to have my photos 576 pixels wide and constrain propstions for a website.
View 2 Replies
View Related
Nov 28, 2012
Coming from a background of ProE, Usually a mirrored group of constrained parts would mirror with alternative constraints locking them in place. Is there a way to do this in Inventor?
Every time I mirror constrained parts through a Datum plane, the results are loose components that could be dragged anywhere. I might aswell have just placed them again, though it gives me a good idea of where they should be.
Without grounding them, is there someway of locking these compents in the mirrored position.
Also, bolted connections pick up on patterned holes and populate them, yet there is only one constraint to the original hole and the rest can rotate around it.
View 2 Replies
View Related
Jan 16, 2009
For some reason, now when I click on Constrained Orbit or Free Orbit the screen automatically starts to move, its like I have just pressed on Continuous Orbit. Free Orbit works OK if I hold shift and use the scroll button, but I am used to using the icon .
View 2 Replies
View Related
Apr 3, 2013
I recently reformatted my hard drive and reinstalled the free to use version of CS2 on my PC. I'm running 32 Bit Windows 7. Since the install Photoshop will not allow me to use Shift+ Cursor to resize with constrained proportions. When I press Shift the cursor freezes and I am unable to move it no matter how hard I press on the track pad. If I resize and then press shift the image will square out. It appears that only the scroll function is disabled.
View 1 Replies
View Related
Aug 17, 2006
I have decided to print some of my digital pictures; how do you crop pictures in Photoshop while keeping the same proportion so they will still work for 4x6 prints. I know how to keep the same proportion when resizing files, just not cropping.
View 5 Replies
View Related
Sep 13, 2012
I am making a graph template that I would like to be able to quickly adjust when needed. I am wondering how to constrain the rectangles so they maintain their total area while their proportions are changed?
View 8 Replies
View Related
Sep 18, 2011
When I enlarge a drawing or draw a large drawing to size, when I go to shrink it down to an exportable size on the page all the porportions of outlines and shades are all out of whack. What can I do to maintain the drawing to scale with all intact for different sizing of jobs, So I don't have to go in an correct the aspect of the drawing for each and every job.
Also if I export a drawing as a jpg and email it, On the droid phones it does not recognize the jpg file and it won't open.
View 2 Replies
View Related
