How do I constrain crop to a certain height/width ration (say 3:4) and NOT do any resampling of the image?
For example, I have an image 2304x3072 and I want to crop it so that the result still has the 3:4 aspect ratio, e.g. the result may be 300:400 or 750:1000 or something in between. But I don't want to do resampling.
Using the crop tool I can only make selection marquees that are constrained as if I am clicking a corner handle. When the selction is finished I have no side handles only four corner handles.
View 2 Replies View RelatedI am trying to find out the best way in photoshop to upsize small thumbnail image, not just a images but also line drawings to. (Is the term I am look for called re sample an image?) Is there a photoshop action that is recommended? Or is there some kind of plugin that would do the job.
View 1 Replies View RelatedI've had to resample images up a bit on occasion for use at larger sizes (i.e. placement in Illustartor or INDesign at a larger size) and have done that with good results. However, I have a different situation now.
I have an image that is 300 dpi. I am working on a huge display in InDesign, and I've had to place this image at 392%, which gives me an effective dpi of 76.
The display company I'm working with wants the image placed at 100%, but needs only 100 effective dpi due to the nature of their technology.
So I think what I need to do is both:
- reSIZE the image to 392% AND
- reSAMPLE the image to be 100 dpi.
I believe this will have to be a two-step process using the Image Size palette. My question is, in what order do I take these two steps and what settings do I use in the Image SIze palette to get the best results?
Using Photoshop CS5 12.0.4 on Mac OS 10.6.8.
When I put photo's from my camara (Olympus C5060) on my computer, they have a doc. dimension of about 22" in Width and about 17" in Height, at 72dpi.
Then, if I want to change it to 300dpi for printing, the size will go to about 5" and 4", and I can accept that. But should I Uncheck Resample Image to keep the quality?
a way to make Photoshop (CS3) use "Resample" when displaying images on a zoom level less then 100%. In the default setting all pictures have jagged lines and aliasing effects which is quite annoying. I guess in a software like that, there should be a feature like this... But nothing seems to be documented.
View 3 Replies View RelatedI was told that if you resample by using exact multiples of the original file percentage size such as 100% to 50%, or 100% to 200% that image quality isn't compromised as much.
View 2 Replies View Relatedwhat is the meaning of "resample", I didn't find it in the User Guide of the program.
What I miss if the resample quality is good instead of better of best?
Is there some macro, script, add-in to resample all bitmaps in a document to a desired resolution and color mode ?
View 5 Replies View RelatedPossible to produce a piece of text, say a single word in XDP X9 and the try to stretch the height you simple get an increase in size with proportions constrained? Sometime you want to stretch the height and I already know how to enlarge with constrained proportions as I've been doing it for years.I can't find any useful tick box to stop this from happening and the only way round it I can find is to convert to editable shapes.
View 7 Replies View RelatedCan I get rid of the thousands separator in the Resample and Paper Size dialog boxes?
View 4 Replies View RelatedI'm a new user of Paint Shop Pro X4 and have come across from Photoshop Elements 9.
One feature I can't seem to find, if it exists at all, even though it really should, is the ability to move a layer while constraining it horizontally or vertically.
In PSE/PS you can hold down the Shift key when dragging layers to keep it on the X or Y axis allowing the layer to be positioned without it drifting in the wrong direction.
Can PSP X4 do this, and if so, how?
I made this sketch and the two marked dimensions were added when i pressed the Automatic Dimension and Constraints tool, because, in spite of all the dimensions i put manually, the sketch wasn't fully constrained.
Why wasn't it? it seems to me that i gave all the necessary information.
I need to have one assembly constrained to three places on along a bar. Should I ( and how would I?) open another assembly drawing, insert said bar and some how insert those three assemblies into the drawing?
View 7 Replies View RelatedIs there a way to list what items are constrained to levels? i need to remove a couple of annoying levels but have a feeling that walls, roofs, families, etc may be constrained to the levels that I need to delete.
I tried doing a multi-category schedule but I think I need to do one for doors, windows, etc. I thought I read somewhere that this feature was available in Revit 2012.
It seems there is a problem with Inventor 3D Sketching. I have a 3D Sketch, with 1 fully constrained vertical line, and another vertical line with an open length. I then join the 2 lines with a line on the top. When I give the top line an angle dimension, I expect it to be fully constrained, but it appears not as the line remains "green".
See attached file.
Windows 7
Inventor Suite 2011
Dell Precision M6400
Intel(R) Core(TM) Duo CPU 2.40GHz
RAM 12 GB
NVIDIA Quadro FX 3700M
Spatial Feedom - Astroid
i am beginer in Assembly,How i come to know whether my assembly is fully constrained or not?
View 2 Replies View RelatedWhen I hold down shift to scale an object or image to keep the proportions constrained, it does not work. This has only recently started to happen and it also happens on photoshop.
I don't have entourage running, which I read could be a culprit.
Would I need to reinstall my CS2?
I am using a Mac Powerbook G4, OSX 10.4.11 Adobe CS2
This assembly has piping parts that are not filly constrained yet will not move. For example a Tee that has only its centerline mated to a pipe centerline acts like it is fully constrained or grounded. I can demote those parts into a sub-assembly and then they behave normally. I'm wondering if this assembly has some kind of bug, even though no errors are reported and rebuild all doesn't work. Is there any kind of other program that goes through an assembly file and cleans up bugs? The pack n go is 65 MB.
View 9 Replies View RelatedI'm trying to constrain a length of ACME threaded rod to a nut so that when the rod is spun or threaded it shows it traveling into the nut as it will be grounded. I would like it to work as a driven assembly or if I was to turn or spin the rod by the mouse. I've reseached this for the last 2 days and can not spend any more time on it so time to ask the experts.
View 4 Replies View RelatedI'm having trouble extruding a fully constrained sketch. The sketch is a cross-section of a hollow cylinder that is splined on the inside surface (see attached part file). The line segments that create these splines seem to be grouped together because moving one line moves the others, however the sketch will not extrude.
I can't use the coincident constraint button to group the lines because they don't separate from each other. I also tried to use the close loop button but was unable to select all the necessary lines.
how I can extrude this sketch or make an equivalent sketch that is easier to extrude
I am trying to constrain a point(on a different part) to the sketch(yellow) on the inside surface of the triangle part. If I try the constraint like how it is now, it only allows me to select one segment, not the entire triangular shaped line. It would work if inventor saw the sketch as one single element, but it of course does not. I tried making a 3d sketch of the inner surface and then constraining to that, but it did not work.
View 3 Replies View RelatedI am a labtech at a community college and look after 48 mac pros in which the students use the entire creative suite. (I only mention this becuase any answers need to consider variations in system settings or photoshop settings. college students get into everything!)
But the issue is when you select the crop tool and enter a custom constraint and crop
The image size is sometimes a full 2 inches off of what you set as a crop?! I havn't run into this before
[I do know you can use the drop down box and use {size and resolution} but I want to know why it doesnt work under custom and unconstrained]
using the crop tool to highlight a picture and crop the sides?
View 1 Replies View RelatedI read what is in the picture in a skill builder, which is:
[URL]
When is a sketch that is copied to another part file linked to the source file?
I tried it, i copied part of a sketch, some lines, from one part file into a sketch in another part file and there was no link
Coming from a background of ProE, Usually a mirrored group of constrained parts would mirror with alternative constraints locking them in place. Is there a way to do this in Inventor?
Every time I mirror constrained parts through a Datum plane, the results are loose components that could be dragged anywhere. I might aswell have just placed them again, though it gives me a good idea of where they should be.
Without grounding them, is there someway of locking these compents in the mirrored position.
Also, bolted connections pick up on patterned holes and populate them, yet there is only one constraint to the original hole and the rest can rotate around it.
For some reason, now when I click on Constrained Orbit or Free Orbit the screen automatically starts to move, its like I have just pressed on Continuous Orbit. Free Orbit works OK if I hold shift and use the scroll button, but I am used to using the icon .
View 2 Replies View RelatedPhotoshop Crop won't complete when trying to crop an image. This just started a couple of days ago and I can't figure out what's going on with it. This happens in Photoshop CS6 and CC
View 6 Replies View Relatedis it posible to get high quality image from low reolution image 100x100 ? i try using 2 software. paint.net and adobe photoshop cs6. here is the original image (115x140 px)
[URL]
and this is my result using paint.net (1000x1218 px) [URL] (cause of bwk i did not post it here. klik the minus link)
and this is result with photoshop [URL]
share with us if you know how to do better resample with high quality pixel.
when I select the crop tool, my image disappears during the entire crop process. I can only see the image in the preview pane. Why is this happening? I am using the most current version of Lightroom, and I am on a PC.
View 1 Replies View RelatedI am missing a crop tool which can rotate the crop rectangle. Similar to photoshop's tool. I found no way to rotate the crop rectangle in gimp. How do you cut out something from an image if it needs to be rotated while cropping? I tried rotating first then cropping but it does not give me enough precision so I end up with transparent areas at the border.
View 5 Replies View Related