VideoStudio :: Upload To Vimeo Directly From Pro X6
Apr 6, 2013
I'm a new video creator, under a time crunch trying to get a channel started on vimeo. I'm very happy with VideoStudio so far, but I'm baffled by what appear to be limited rendering options.
Basically when I upload to vimeo directly from VideoStudio Pro X6, it doesn't work. It uploads but then just hangs. If I take the rendered file, and upload it directly to Vimeo, the files are corrupted / invalid every time. If I use the MPEG-4 AVC 1280x720 preset to render my video, it uploads perfectly to YouTube but Vimeo says it's a bad file every time.
Here's what is frustrating me: I'm used to the full rendering options in Sony Movie Studio or MPEG Streamclip. With those programs I can easily match the vimeo compression guidelines. But in VideoStudio I can't figure out how to get full access to the rendering criteria? I can go to Create Video File > Custom > Options, but the options there seem very limited. I don't see any way to adjust the vimeo upload preset.
Vimeo's tech support suggested that I compress with MPEG Streamclip - but how should I render my edited video from VideoStudio before I compress it with Streamclip?
View 3 Replies
ADVERTISEMENT
Feb 25, 2014
Is there any way to uploading Edge Animation animations on Vimeo or Youtube? (using v. 1.5)
View 1 Replies
View Related
Nov 13, 2012
I'd like to post some videos on Vimeo .
They footage was shot in DV CAM on a Sony A1 and the footage and the project is:
PAL (25 fps), Microsoft AVI files, 24 bits, 720 x 576, 16:9, 25 fps, Lower Field First, DV Video Encoder -- type 1 DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
Vimeo recommends the following settings:
Codec: H.264 (MP4)
Frame rate: same as shot ie 25 fps
Data rate: 2000 kbps (SD)
Choose 640×480 for 4:3 SD video, 640×360 for 16:9 SD video
If you have the option to control the pixel aspect ratio (not the display aspect ratio), make sure it's set to "1:1" or "1.00," sometimes referred to as "square pixels."
Deinterlacing: Maybe - if you are shooting on an older camera, enable the deinterlacing option. Otherwise, you may get weird-looking horizontal lines in your video. With newer camera models, deinterlacing shouldn't be an issue, so you can leave this option unchecked.
Audio
Codec: AAC (Advanced Audio Codec)
Data rate: 320 kbps
Sample rate: 44.1 kHz
When tying to create the file though the frame size for mp4 though does not seem to give an option for 640x360 on the drop down menu. 640 x 480 seems to make it look stretched? Should I choose 720 x 576 as it originally was?
Also, what should I do with the box 'perform non square pixel rendering?' and how does that relate to the pixel aspect ratio info? And what about the bit about deinterlacing - not sure what that means.
View 14 Replies
View Related
Aug 10, 2012
I uploaded the lightroom 30 day free trial that i received when i purchased adobe photoshop elements 10. I am now unable to upload pictures directly to my computer because every time i put a memory card in, lightroom pops up and they upload there. Because of this i can not upload the photos to any other program, including the program that i spent $80 to use. I have tried deleting the shortcut, but this doesn't uninstall the lightroom program. I am not sure how to uninstall it because i want it off of my computer.
View 2 Replies
View Related
May 8, 2012
On a pro account, Vimeo has no time limits. Yet using the tool to upload to Vimeo in VS X4 forces a trim to 25 minutes. Is there a work around? Is there any way to replicate the settings on the Vimeo upload without the time limit? I can't seem to find a way to replicate the Vimeo upload settings using the custom portion, or the mp4 HD portion of the share tab.
View 2 Replies
View Related
Dec 4, 2012
I have footage in the following format which I'd like to upload to Vimeo (it was shot on a basic home camcorder some years ago). What would be the best format? I have VideoStudio Pro X5 trial version.
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 4:3, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
The Share - Upload to Web - Vimeo MPEG-4 4:3 option gives you:
MPEG-4 Files
24 bits, 640 x 480, 25 fps
Frame-based
H.264 Baseline Profile Video: 2500 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
Is this OK? Vimeo said they pillarbox all SD videos (ie. smaller than 1280x720) in order to fit them into their standard player so should I do the Vimeo HD 16:9 option for instance?
It gives you:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
View 8 Replies
View Related
Mar 20, 2011
Is there or is it possible to create a plugin to directly upload a picture from within Paint.net to Twitpic, Twitter, Facebook and other kind of social network?
View 5 Replies
View Related
May 6, 2011
I am currently running VS Pro x2 - is it possible to upgrade directly to x4 or do I need to go through x3 first?
View 2 Replies
View Related
Feb 7, 2012
I'm trying to upload a video into YouTube straight from my Video Studio ProX3. Was able to do it successfully with a video just 2 days ago but for some reason, doing a different video (same videocam & format) it's giving me this error message "The entity name must immediately follow the ',&' in the entity reference". And it won't upload or let me proceed. I have no clue what this means, i tried redoing it and changing the video file name and no luck.
View 1 Replies
View Related
Dec 23, 2010
Right at the end of it being uploaded I get this message
<?xml version= ‘1.0’
Encoding=’UTF-8’?><errors><error><domain>yt:validation</domain><code>too_long</code><location
Type=’xpath’>media:group/media:keywords/text()</location></error>
</errors>
The video is only 3:45, so it doesn't exceed 10 minutes, I uploaded videos successfully when I had the trial version and whenever I try to upload it to youtube on the purchased version, it gives me the error above, and does not put the video on youtube, what is the problem?
View 7 Replies
View Related
Mar 26, 2012
I'm now running X5, I must say it is much faster. However, when I try to upload to youtube there is a 15 minute limit and the only option I have is to let it clip the video to 15 minutes or cancel (i.e. I can't render the video and then cancel the upload and do it manually because it CLIPPED the output to 15 minutes)
So, I try to create a template to use for Create Video File so it will match my other uploads. I can't set the frame width and height. Without a template the Create Video File, mp4 etc... the default is 1920x... In the Make Movie Template the highest I can set it is 720x... the custom size is greyed out. I don't understand (and maybe I don't know) why I can't set the video parameters to anything I want them to be. Why is 720x the highest available...
In X5... Is there a way to turn off the 15 minute limit? Is there a way to HACK and turn off the limit? Is there a way to create the videos and set the settings where I want them so they match my previous uploads?
Note, the "cancel the upload after file created" trick no longer works. If you think I can create a template, why I can't set the parameters.
View 5 Replies
View Related
Sep 15, 2011
My YouTube-account is upgradet for files ut to 20gb, and naturally longer than 15min. But my Corel VideoStudio PRO x4 does not want me to automaticly upload longer files than 15 minutes.
View 4 Replies
View Related
Aug 15, 2012
The installed Corel VideoStudio Pro X5 does not work properly, it can't upload or read photos-- .jpeg format. Also from the sample of the editor there are photos when I try to use it and drag it to timeline, it says unreadable.
View 3 Replies
View Related
Nov 21, 2010
I am getting an application error when I try to upload to Youtube. It fails at the end of the upload process. I cant copy the error, see attachment for message.
Windows 7 x64
Asus Mb-P7P55D-E
4gb ram
1TB hd
Nvidia 9600
View 2 Replies
View Related
Dec 5, 2012
I have used VSX5 to upload video files to the my facebook using share->facebook upload fuction.
After I upgraded to windows 8 and fresh reinstalled VSX5, I can't upload the file to facebook anymore using "share" and "web posting" fuction.
When I tried to upload video, it said "can't access the facebook" even my FB's ID and PS are correct.I already patched with SP1 pack.
View 5 Replies
View Related
Aug 3, 2011
How to override the 15 min limit while export to youtube ? My account does not have 15 min limit so why the corel application forces me that limit
and
i cannot find other settings to make so good video "1280 * 720" 25 frames etc that are used when clicking youtube button.
Want semi-HD (not full-hd) but it would nice to be able to adjust the bit rate so that the size is under 2gb
View 4 Replies
View Related
Apr 19, 2011
I've got some AVIs to upload to YouTube. Thing is doesn't X2 have a function to allow you to upload video files from there? It's got the YouTube icon but for the life of me I can't get it to recognize my files.
View 2 Replies
View Related
May 23, 2012
Upon uploading a video clip that already has video sound attached, why am I not able to hear that video sound when I try to edit my video?
View 4 Replies
View Related
Jan 22, 2012
It is always a pleasure as well as informative experience. My question is simple I would like to incorporate a Powerpoint presentation to my video project. Is this possible? If so how would I go about uploading the PP files to Video Studio Pro x4? Or even better Is there any way for me to create Power point like video screens with Video Studio Pro x4 editing or templates?
View 2 Replies
View Related
May 23, 2011
I have just loaded X4 (previously used VS 11.5 Plus); however, I can not seem to get the sound working properly inside the X4 program. My sound card is fine and when I play/select the individual files using windows explorer they all play fine. Is there a global mute setting that I have to turn off/on?
Also, I have a lot of audio, transitions(burger, etc) and animation files from VS 11.5+ that I would like to make available in X4. How you upload these file into X4? How to load the Bonus Audio content that came with X4 (animal, cartoon, etc)...
View 9 Replies
View Related
Oct 2, 2013
On the newest addition of Corel VideoStudio, I've been trying to upload a video to youtube (a 30 second one). Everytime, right before it's finished uploading on Corel I get the error message 'Upload failed due to a connection error. Please check your connection and try again'. I've tried uploading it to 4Mpeg-HD and MPEG-4. I've tried converting the video to various different files (Avi 750x576, MP4 704x480, etc). My computer's internet is perfectly fine and extremely fast, without any lag. I'm hoping to upload the video through Corel only because, despite my fast internet, I waited over ten minutes on a manual upload for the same video on youtube and after those ten minutes were up it was still at only 4%.
View 1 Replies
View Related
Jan 2, 2012
ok i am trying to upload a project to youtube and it says that it isn't a supported file. so i went online to look for a file converter and didnt find any that worked. how can i convert it from .vps to something i can upload on youtube/face book?
View 2 Replies
View Related
Jul 2, 2013
i am using this code for rotate multiple compositions, :
[URL]
my questions is is there any way to start my first comp, when it finish , in the same div play vimeo with autoplay and when it finish , start a third composition ?
View 1 Replies
View Related
Sep 20, 2013
I'm searching a method to export flv from Photoshop cs5.5 . I've used adobe media encoder, but in an external software, i need a method via Photoshop.
View 2 Replies
View Related
Oct 28, 2012
Gimp-user-list
Can't directly save to jpg, so exported.Export to jpg made png. Same for psd.Shouldn't name track chosen format, so no manual override needed?
View 2 Replies
View Related
Aug 30, 2013
How can I access PS CC directly without going through Bridge CC?
View 1 Replies
View Related
Oct 24, 2013
photoshop CC, the program, shutdown directley.How can I run photoshop cc without shuting down?
View 1 Replies
View Related
Nov 8, 2008
I'm using Vista 32. After updating to CS4 I can no longer open jpg files directly into PS by clicking on the file in windows explorer or an e-mail. After much searching and looking for file associations, I was able to get jpgs to open into Bridge from windows explorer, but still cannot get them to open directly in PS. When I attempt to open a jpg from an e-mail message, I get a window in Bridge pointed to a temp folder.
View 6 Replies
View Related
May 28, 2013
Am I able to export directly to smugmug from LR4?
View 2 Replies
View Related
Sep 3, 2012
I can't import directly from an XQD card into Lightroom on my laptop (Windows 7). The images appear in the import window, but I get the following message when trying to import: "The following files were not imported because they could not be read." I can move the files over to the hard disk where Lightroom can import them but only by using the "Add" function. This precludes my adding the date to the file name and converting the files to DNG. The funny thing is I can import them into my desktop, but it has less memory and an older processor which during the import often exceeds the memory capabilities and corrupts the image file.
View 2 Replies
View Related
Oct 2, 2012
how to import photos directly unto my EHD via LR. I don't like my images touching my internal hard drive because it slows it down so much. This was never a problem when I used my PC. Two weeks ago I switched to a MAC and now when I plug in my EHD to attempt to import pictures onto it from my Nikon D7000, it states that it cannot read the files. WHen I import them to my internal HD they work fine, it's only when I try to import onto my EHD.
View 1 Replies
View Related
