Because I had some problems with burning Dvd's I reinstalled VS Pro X5. At starting it opens but does not work. I get the message that there are problems and I have to send the name of a dumpfile to Corel. It's the message: vstudio_15.2.0.10_2013009_135036.DMP. What can be the matter?
View 1 RepliesI had been using the program but stopped for about a week. When I tried to go back into it again, all that would come up would be the introduction or the announcement to the program. I waited and waited and it just stayed fixed on the screen. I had to do a hard shut down to get it off the screen. I tried several more times and the same thing would happen each time. So i decided to uninstall the program and then reinstall it. No change, the same thing happened. i even tried to open the program by opening one of the saved movies
View 1 Replies View RelatedIs it possible to have VS Pro 5 open with the last-edited vsp file when starting the program, by default? I couldn't find anything in the "Preferences" about that option.
View 3 Replies View RelatedI can't open an AVI file any more. switched to QuickTime 7.5.5 but still doesn't work.
View 3 Replies View RelatedThe previous problem I had was it wouldn't smart proxy 1GB files and above (still not fixed), now X3 won't open files 1GB and above. I tried opening files over 1GB that I have edited before, but it's not happening. Basically the files are from a Canon 5D MKII, converted to AVI via Cineform Neoscene. Today I selected about 12 clips I have just converted to AVI I filmed yesterday, and 4 of them (over 1GB) gave the following message
".... file is not accessible"
then
"these files cannot be added to this project. These files may be of unknown file format. The computer does not have enough memory, or the file is coyright protected"
Is there some restriction setting I have accidentally selected? Like I said this is a new problem, these files would open before. I've tried clearing some space on my laptop's hard drive, so there's over 200GB, but that didn't work either. I contacted Cineform, and they said their file format is the same whether it is above or below 1GB in size, so the problem lies with Videostudio.
I have both VS X2 and VS X3. I've been working on a project in VS X2 for the last month. I just recently installed VS X3. I opened up the file in VS X3 for the first time, saved the project. Now the file won't open up in VS X2. I tried with another short project file that i originated in VS X2, opened it up in VS X3, did nothing to the file, saved it in VS X3, and now this file wont open in VS X2 anymore either. It seems that when I save a file in VS X3, whether i edit the file or not, the file will no longer open in VS X2. All files are the standard .vsp files.
View 5 Replies View RelatedI just bought and installed the downloadable version of VSPX4 and I can't open MOV files. I updated to SP2 and still no joy.
When I open the "Open Video File" dialog, Quicktime is not listed among the file type options. I also tried dragging the MOV files from the File Explorer, but it won't let me drop them on the VSPX4 timeline or library. I'm confused because Corel advertizes VSPX4 as both reading and writing Quicktime. Does VSPX4 have any ability to provide information about what's wrong? Is there any way to test the configuration?
I want to edit files produced by a Contour HG camera. When I open them in Quicktime (v. 7.7 1680.34) the movie inspector says they're h.264 format.
I started a VSX5 project that my friend wanted to piggyback on with his VSX4 software . He tells me that VSX4 opens but nothing seems to happen afterwards. Does it mean that VSX4 is incompatible with VSX5 .vsp file projects ?
View 2 Replies View RelatedI can not open any MP4 file (let alone move to a track). So, I did things I read here in these post. I installed the latest version of QuickTime and changed the file type to MOV. Was then able to open and select to the time line. Now, when I play the clip in the time line it looks good. However, when I play the project the playback is very slow. Other file types work fine including clips that I mix with the MOV clip. The MOV part is slow and the WMD part is fine. Tried converting the MP4 to other formats but the quality suffers greatly. All this conversion really takes time. Will VS ever be able to read a MP4 file like other similar routines?
View 5 Replies View RelatedWhen I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies View RelatedI have a new mini recorder which records 720x480 at 29.897 fps. Video studio says Unable to open file *****.avi for all of the files. They play perfectly well with MS media player, VCL, Quicktime etc so what is wrong ?
View 9 Replies View RelatedI opened a previously saved project and all the AVI files have blank spaces. When I click properties it says the file is unreadable. When I try to open the file it says unable to open file, catastrophic failure.
These are the same files that I used to edit and render a video a few months ago, and I was able to successfully open the same file in Windows Media Player. I am using VSX4 on a Windows 7 laptop. I'm not sure what updates are installed.
The video file is DV AVI file (720 x 480, 28854 kbps data rate, 298788 kbps total bitrate, and 29 FPS).
I still have actual burned DVD's and am wondering if it is possible to somehow open them in VideoStudio to do some additional editing.
View 3 Replies View RelatedI've encountered an issue regarding opening FLV. or AVI file extensions. AVI files - Whenever I try to open AVI files in Corel VideoStudio X5 Pro I get an error message saying "so and so file is not accessible" and then a second message replies: "These files cannot be added to the project. These files may of unknown file format, the computer does have enough memory, or the file is copyright protected."
Here's the information on said file.
VIDEO ASPECT
Video Size: 19.3 MB (19,844 KB / 20,320,402 b
File Length Correct
DivX Style "packed bitstream" AVI
OpenDML (AVI v2.0)
Interleave: 989 ms (24.7 v.frames), preload=1536
Audio frames: Split across interleaves
Video: 18.5 MB (95.93%)
Audio: 625 KB (3.15%)
AVI Overhead: 181 KB (0.92%)
[USER]DivX503b1393p
[USER]XviD0047
CODEC: XVID
AUDIO ASPECT
Codec: 0x0055 MPEG-2 Layer 3
Info: 24000Hz 56 kb/s tot , Joint Stereo
Is there any way to copy a project from Final Cut Pro (fcp) and open in VideoStudio? I have someone who has done hundreds of hours of work on a video and I'd like to take over the project... but he used FCP.
I know I can have him produce a the video and then open it back up as a video, but I'm hoping to avoid the loss inherent in such a move.
At the moment, the only file format that I can import on the edit tab is *.wmv. There should be no issue importing *.avi or *.mp4 or any other format for that matter, but it fails to open the files. I keep getting the same "unable to open the file 17101:7:1" error for seemingly no reason. Everyone says this software's functionality is wonderful, but if it won't even let you bring in normal files it's looking less and less useful all the time.
View 7 Replies View RelatedProgram simply does not open. Thus I can not get a serial number. And you can not post a question on the web site without it. I did register the product, but my account only shows the Corel Paint program not the Video one. Both came bundled with my laptop.
Now I have more videos I want to edit. So I tried to use Video Studio and it does not open nor give any warning messages, as to why not.
Is there a way to leave the Options Panel opened as its default position? Right now I have to click each time on the blue botton to open the Options panel at each clip that I decide to edit (it closes automatically each time) on VSX3
View 11 Replies View RelatedVS Pro x3 - Trying to do voice over on a project and get the above code. I opened a blank project to test and voice over works OK?
View 2 Replies View RelatedSince installing Video Studio Pro X5 and keeping my previous version (V.S .11+) installed as well,I am unable to open downloaded videos with X5.It is not available as an option even when I browse for it.I have to open it with VS11+ and then import it into X5.
View 14 Replies View RelatedIs it possible to open a disc image file to see what is on it, or can it only be used for burning a DVD
View 4 Replies View RelatedI've been using VideoStudio Pro X2 for the past 2 years and it has been working just fine since, up until mid last week. I was rolling right along, creating MPEG-2's of the Classic 39 Honeymooners episodes, until I got up to Episode 24, when I started getting the 'Failed to open the MPEG encoder' error message. I searched through this forum to find any possible solution and the only solutions I found were to check to see if the MPEG-2 encoder CODEC is installed, which it appears to be according to the InstalledCodec utility and to uninstall/reinstall VS, which I did. I still receive the same error message, however. What could cause it to go from working one moment, to not working the next?
I tried to attach a text file listing all of the installed codecs on my system, so you can look to see if the needed codecs are installed, however I was unable to attach the file...says 'extension not allowed'. How to upload the file.
I have X4 Pro, X5 and X6 Ultimate installed on my computer; as well as, a few older versions of ULead software. I keeping getting this message: "device error. Cannot open the wave-in device" every time I try to use the microphone option in X6 to try and narrate my video.
The microphone option works fine in X5...
The trouble is I am using the track motion option from X6 in my video, so I cannot open the video in X5. Is it some sort of driver problem, or is there a corrupt file that needs replacing etc...
My daughter has need of software to burn dvd's from her old digital tapes. She has an older copy of adobe premier and has the editing done. The tapes are probably d-avi? She is using windows xp prof'. Should i just buy her VS-x3 so she can use that burner that corel lets us download?
View 2 Replies View RelatedI have a problem with media libraries in Corel Video Studio Pro X4.
When I close and reopen Studio X4 the library does not contain any media (photo, video, audio). Library exports and imports no luck. It looks as if start Studio the library is reset. A smart package no luck too.
Deleting C:Documents and settings....Ulead SystemsCorel Videostudio Pro14.0pl-PL no luck.
The problem is so serious that adding a HD video again- new proxy file is created- it takes a long time. The old proxy file is correct, but in proxy manager is absent.
AMD Athlon 7860 (DualCore) 2,8GHz, 4GB RAM, NVidia GeForce GTS450 1GB CUDA, Windows XP SP3. VideoStudio with servicepack, DirectX 9.0c. Administrator acount. 40GB free on C: HDD.
I've just reinstalled my window xp which I used it before, but as the result, I couldn't open my saved vsp file at Corel Videostudio pro( I used same software to edit my video), screen say:"file format is not valid" and error no. is 15055:1:1, also I couldn't import my video file of the project to the library, shows: unable to open the file , file not found and I couldn't see all my files' format(such as video, audio etc) in the smart packaged folder. BUT I can still import the video files which I have never used
View 1 Replies View RelatedMy problem appears when I open a saved project. Only when I open one certain file. All run perfect when I open others saved files. The error is:
"The program has encountered an unspecified erros and has stopped functioning. Please contact Corel Technicial Support and send the dump file for analysis.
The name of this file is: C:/User/home/AppData/Local/Temp/vstudio_16.1...... DMP"
In VideoStudio X4 (SP1), I am trying to import an edited (VSX4) project into the library in order to use parts of it in a different project. This is something I have done successfully before but the last couple of times I have tried I get the message: “Unable to open file. File format mismatch”. (1081:1:3) There is no problem opening up the project in the normal way it is only when I try and import it into the library. I have compared the properties of these files with the successfully imported files and, to me, they look identical. They were all captured from video in the same way,
View 9 Replies View RelatedThis is driving me up the wall, I have pro X4 on my laptop and computer, I can't edit on my laptop as it lags, maybe Corel is too big for my laptop I don't know. On my laptop it allows me to import AVI. files, however, when it comes to my PC, it doesn't.It doesn't make sense how I CAN on my laptop but CAN'T on my pc, It did used to work fine on my pc when I had X2, but towards the end it started making the same error message
'Unable to open file [N:GFFILE309.AVI]. File mismatch'
I'm losing my temper, converting the files isn't an option as it makes my HD footage look like crap and pixilised, it also takes forever. I am at a dead end, I have installed the Corel Videostudio pro x4 codec and that hasn't worked at all.
Circumstance: Using VSPX3, how to combine multiple VSP files in a single movie using "insert media file into timeline" command on File menu?
Each VSP file represents different segments of movie. Each VSP file has items on Overlay track, title track, Music track, as well as transitions.
Each VSP file can be loaded using "Open Project" command under File menu.
Problem: VSPX3 displays error message "Unable to open file" "file format mismatch" [16803:1:2]
I completed a video and when I went to 'Create a Video File' I would receive the following error message...
"Failed to open MPEG encoder"
I'm using Ulead VideoStudio 11+. The 'vsp' file is too long...One hour fourteen minutes. I made a 'Part 1' and cut the vsp to forty-five minutes and still received the same error message.
I cut the 'vsp' to one minute thirty seconds and it would "Create a Video File'. I've never had this problem before.
It seems with Ulead VideoStudio 11+ whenever I have a problem like this I can resolve it, by backing up all the files, then removing the program, thoroughly clean the hard drive and re-install 11+.