VideoStudio :: Cannot Render Video - Unspecific Error
Nov 24, 2013
I have been using X5 for almost a year and everything seems find until lately when I up graded my system to window 8.1. I have assemble a 40 min video but when I tried to use 'share' to output to MP4 iphone/ipad HD,the rendering go halfway then the VideoStudio crashed with an error 'The program has encountered an unspecified error' and a DMP file and ask me to contact Corel support. My project only has 1 video tack, 1 voice track and 1 music track and the project file is 17,426 KB. If I disable the voice track, then the project can render successfully. Since the voice track is recorded using VideoStudio voice over with WAV format, I went back and convert all voice into mp3 to smaller size but still crash when render halfway. My system should have enough resources to process this 40 min video.
Window 8.1 pro 64x
16GB ram
CPU i7
Hard drive 2T.
I have assemble 40 min video with heavy voice before in XP and it render without any problem. Is there are issues between VideoStudio and window 8.1 64x ? Is there a limit to VS project size, or voice track size ? I read some of the posts and you recommend to manfully uninstall the software and reinstall the software. I am reluctant to do this, not at least after I can output my project to mp4, because it might wipe out my setting, templates, libraries, and even my project file. Do you know of any tool so I can read the DMP file ? I don't understand what good to have a DMP file when my software have passed the 30 day or 1 time support warranty?
It has been very frustrate to spend all this time to assemble a video and at the end cannot produce a sharable version. I was about to upgrade to X6 but now I have to think twice if this issue is not resolved. What good are all thees fancy new features in X6 to me if I cannot produce a sharable version of my project ?
NTSC drop frame (29.97 fps) Microsoft AVI files 24 bits, 720 x 480, 16:9, 29.97 fps Lower Field First DV Video Encoder -- type 1 DV Audio -- NTSC, 48.000 kHz, 16 Bit, Stereo.
When the rendering completes, a "Catastrophic Failure" error code comes up. When I try to play the video in VLF, I get the following message
"AVI Index
This AVI file is broken. Seeking will not work correctly."
If I press "don't repair", the file plays, but the indexing bar does not run along the bottom of the player. Obviously something is wrong, but I can't seem to work it out.
The input files are as follows:
Video Type: H.264 video, upper field first Attributes: 24 bit, 1920x1080, 16:9 Frame rate: 29.970 Data rate: variable, 16,800 kbps max
Audio type: Dolby digital Attributes: 48000 hertz Layer: none Bit Rate: 256 kbps
I've tried uninstalling and reinstalling, with no luck.
I have Video Studio Pro X3. I've never had a problem since I got it, but recently I've been trying to render video at 60 frames per second. I've looked everywhere online for tutorials but still don't understand how to do it. I keep getting 29.97fps in the end. I need it for a project and I need it very soon.I use MP4 video files at 60fps.
Why I cannot render a frame-based video when selecting (Share/Custom/MPEG Transport-stream)? My goal is to create an AVCHD video and burn it to a DVD (4.7G). My video is 16min long and the calculated bitrate is around CBR 15,000 kbps. If I use the (Share/ADVCHD/1920) option, I don't have any control over the settings. I have already deinterlaced my video using Neoscene. That is why I want to create a frame-based video.
Below is my workflow.
Two video sources: .mov(1080p) from ContourHD 1080p camea .mts(1080i) from Canon Vixia HF S100
1. Trim .mts files in CSV PX3 2. Trim .mov files in Contour S/W 3. Convert trimmed clips to .avi with Cineform Neoscene 4. Edit in CSV PX3 5. Planned to render in AVCHD, 1920x1080p, 29.97 fps, 15000 kbps
Basically, I have a Sanyo HD camera which I've used to capture quite a bit of holiday footage. I've edited some together but when I output the project to either mp4 or mts the picture is choppy when panning.
The camera was set to 1080p @ 30fps (there's no option of 25fps even though the camera was bought here in the UK) which I have matched by choosing the "Custom" option when creating the movie. I've matched the bitrate (16789bps on the source) but this ends up being 15540bps on the output file. (??) According to the properties on the source file it's 29.97fps which I have also matched in the Custom settings option.
I understand I should expect dropped frames if I was trying to output the file as PAL compliant, but I've got VS set to NTSC so I don't think this is an issue.
The source file is mp4 and looks fine when viewing the panning scenes.
PC Spec:
Intel quad core 2.4Ghz 4Gb RAM ATI Radeon 5430 Graphics card 2TB SATA HDD Windows Ultimate x64
source video 1080i(tv capped) format:ts 25 fps no audio
output optinos: MPEG Transport-Stream Files 24 bits, 1920 x 1080, 25 fps Frame-based (HDMV-PAL), 16:9 H.264 Video Video data rate: Variable (Max. 9900 kbps) Audio data rate: 384 kbps Dolby Digital Audio, 48 KHz, 2/0(L,R)
i tried many times , sometimes the render was comple without warning or error , sometimes the render process was failed by the message "File format mismatch" . but there`s no output video in my computer in either way
Given that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
(1) whether VS Pro X4 will support the 3D video clip taken from Panasonic HDC-SDT750 3D capable camcorder?
(2) If it is supported by VS Pro X4, how do you render or burn the 3D video file onto BD disc so that it would be recognised as a 3D video format disc and playable in a 3D Blu-ray player?
I am editing a video using VS X3 and am using both AVCHD 1080i and AVCHD lite 720p clips.
What would be the best format to retain quality when I render as a file and then copy onto a USB stick to play on my Bluray player? My player seems able to read most formats.
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
I've been editing with no problems for a while now but every time I try to share/create a video file it fails every time at 95%. I'm assuming it must be something specific for it to fail every time at the same point and i've tried it in multiple formats but always with the same result
I just installed VideoStudio Pro X4 on my Dell laptop with 64BIT, Windows 7 Home Premium. I am TRYING to use an EZCAP 64BIT device with my 8MM camcorder connected to it and "Composite" input selected as is appropriate in this connection. VideoStudio loads fine; select Capture tab, fine; click Capture Video, that loads fine with "Capture Video" flashing and waiting to be clicked again to begin capture, fine; I click "Capture Video," the icon changes to "Stop Capture," fine; I press PLAY on my 8MM camcorder; the video and audio begin, and I can see and hear it on my machine for approximately 8 - 10 seconds, then a box pops up with the message, "Unable to capture the file because it is copyright protected. OK"
I make Let's Play videos on youtube (Video game videos with commentary) and I have been using Corel VideoStudio Pro x4 for awhile. It was only recently that I decided to post a picture over the video and now I keep having the *An internal error occurred when overlapped buffer is full*.
So far, here is everything that I have in my library:
-19:09 (nineteen minutes and nine seconds) of videogame recording -I have 4 pictures overlapping the video (all of them are PNG) I tried changing to GIF and JPG images to see if it would fix the error but it wasn't successful -I have 7 points in the video where there is text (not sure if it really matters since I had no problem with text before) each of the text is near 5 seconds long for each -There is 19:00 minutes of voice recording that is in MP3 format (I never had any problems with this format either) I can change it to a WAV file if it will stop the errors. -Then there is also short audio clips that are 1 second long in 4 points in the video. It is a WAV file.
So basically I have these type of files- MPG (video). PNG (Images overlapping video). MP3 (voice recording) and WAV (short audio clips)
I am using a Windows 7 home premium operating system that is 64 bit (Acer laptop, Aspire) I got the video game recording from Pinnacle studio 12 HD premium using a Dazzle recorder. I got the voice recording from Audacity using a Blue Yeti USB microphone. And the images I got were on google then I used Paint.NET to merge them together, and the short audio recording I got from a Video Game recording and I used this program to extract the audio from the video.
The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis.
I just purchased Video Studio Pro X4 and I'm hoping it wasn't the wrong decision. We do a lot of voice overs and wanted to start adding subtitling and audio swap to our list of services. Subtitling with the software has proven to be easy, as well as the audio swap. But I've just ran into a problem that I can't solve (I'm an audio guy through and through...but my video skills are low)
Video Type: H.264 Baseline Profile Video Total Frames: 6,356 Attributes: 24 bits, 1280 x 720 Frame rate: 25.000 Data rate: 4836 Kbps Audio Type: MPEG AAC Audio Audio Attributes: 48000 Hz, 16bit stereo
I easily swapped the original audio for ours and wanted to render the video exactly as it was given to me. However, when I try using the option: "Save as First Video Clip" it gives me the error:
"The frame size (1280 x 720) of the video file does not match the settings and therefore cannot be trimmed." 18706:1:1
This happens on both of my computers (Windows XP & 7). Am I missing some codecs...my video cards not up to snuff, or something else? Again, I know little about video.
In Settings, I tried changing the project properties to similar settings as the original video, but the highest frame size it will give me is 720 x 480; and 'user defined' is grayed out. Not sure if any of that matters at all.
Lastly, yes I can manually type in all the info in the Custom option and can successfully render a video with similar specs, but I was hoping to just use the "Save as First Video Clip" option.
I need to burn video.... whenever i burn, it stop and appear unspecified error 5.0.0.
these are the spec: PAL ( 25fps) MPEG files 24bits, 720 * 576, 25 fps Lower Field First (dvd-pal), 4:3 video data rate: Variable ( Max 8000kbps) LPCm Audio, 48000 Hz, stero
I keep getting a dialogue box that says "Revit was unable to render the view due to an unknown error during render calculations. The rendering operation will be canceled." The only option is to click "close" and when i do so, it continues to render but only the sky and grass. My buildings are not present.
After not having much luck with the last video card, I changed my video card to a device with the Philips 713x chipset
Now when I select video capture I get the following message: failed to initialize the video capture plugin Open driver failed (15200:43:0) (15023:4:2) cannot create the video capture filter
I have just installed card (SAA7130 TV PCI card) with latest drivers excluding the software so Video Studio 12 pro is the only capture software on the machine . I also re-installed both card and Video Studio after doing a complete system restore and used CC cleaner to remove any residual data before re-installing.
I need to use video capture within the Video Studio software as I need to use the scene detection functionality.The reason I had to change the card in the first place is that video studio only allowed me to capture in AVI 320x240 and gave 'capture failed' errors with anything else.
I am a student in animation and media design. I have used photoshop in CS4 to animate in the past then I switched to creative cloud.
Another student thinks that I am getting it to render and its playback is just to fast for me to see but I have adjusted the settings and used different formats but it is all the same. What else could it be?
I can render out the same video (same quality) in both PS CS5 and PS CS6, and in CS6 the mov file size will be about 10X bigger. How can I get CS6 to render out a smaller file size mov?
examples (random ACS comertial/video from youtube)
I just reinstalled my photoshop after formatting my pc...
installed photoshop, went to render one of my animations to a video file like iv done before, but when i go into the render options.. the quicktime export options im not able to use....
I've got a problem with a Photoshop CS6 version I use in my office (Windows 7). Everytime I try to export a video from the timeline to use an image sequence on a graphic software it keeps crashing. The video render initializing starts and stops more or less at 80%.
If I cancel it, I cannot use Photoshop again as it keeps restarting at anytime only for stopping itself always at the same point. So I have to force it to close with the task manager.
I am trying to render a video from layers I made from a quicktime. The problem is that all of the layers are on top of each other and take up the whole length of time instead of each being one frame sequentially after each other. So, when I render or do a DPX sequence it is only one frame played for 6 seconds. There are 167 layers (frames) so I would rather not have to adjust each layer back one frame at a time.
I am wanting to render video with the H.264 codec. Then I am wanting to copy this file and place on a DVD. (No Authoring in Encore). I have done this several times and the video is choppy. The file plays normal when it is running from the hard drive.
I can see that the render video options are vastly different in OS X and Windows versions of PS CS6. Not only they are different layed out but as far as I can see a wide range of codecs are missing on the OS X version.
In particular, how can I export a video file using QuickTime container and H.264 codec in OS X version? If You select H.264 video it creates an .mp4 file whereas I wnat a .mov file. Same codec but different container.
MacPro1,1 (32bit kernel, 64bit OS X 10.7.5) x5355 8-core 2.67GHz CPU, 32GB RAM, 4-Drive RAID0 System and data drive (four new 3TB Seagate Barracuda [fast] drives) GTX 570, 1.3GB - Recognized by PhotoShop for OpenCL and OpenGL PhotoShop CC (v 14.1.2 x64) Trail (about 5 days into it)
1) I can open a video and play it back at the speed of the video.
2) I can not get playback faster than 1 fps if there are any filters applied - the pre-render / buffering isn't working at all.
3) I can not "Render Video" by choosing either "Render Video from the menus or the Export Arrow button in the GUI.
As soon as I select either I get a Progress Bar that that says "Initializing Video Export" but never finishes. I have waited as long as 4hrs and still no dice.I've tried with more than a few different videos and the result is always he same. Here are three of the videos I have tried with:
I'm trying to use the export>render video feature in Photoshop CS5 extended. I must use avi without any compression, keeping the original frame rate (the original file is also an uncompressed avi). My impression was that this setting keeps the original video quality.
However, the exported video loses quite a bit of its original quality. Is it possible to keep the original quality?
