VideoStudio :: Overlapping A Picture Over Video (error)
Oct 10, 2012
I make Let's Play videos on youtube (Video game videos with commentary) and I have been using Corel VideoStudio Pro x4 for awhile. It was only recently that I decided to post a picture over the video and now I keep having the *An internal error occurred when overlapped buffer is full*.
So far, here is everything that I have in my library:
-19:09 (nineteen minutes and nine seconds) of videogame recording
-I have 4 pictures overlapping the video (all of them are PNG) I tried changing to GIF and JPG images to see if it would fix the error but it wasn't successful
-I have 7 points in the video where there is text (not sure if it really matters since I had no problem with text before) each of the text is near 5 seconds long for each
-There is 19:00 minutes of voice recording that is in MP3 format (I never had any problems with this format either) I can change it to a WAV file if it will stop the errors.
-Then there is also short audio clips that are 1 second long in 4 points in the video. It is a WAV file.
So basically I have these type of files- MPG (video). PNG (Images overlapping video). MP3 (voice recording) and WAV (short audio clips)
I am using a Windows 7 home premium operating system that is 64 bit (Acer laptop, Aspire) I got the video game recording from Pinnacle studio 12 HD premium using a Dazzle recorder. I got the voice recording from Audacity using a Blue Yeti USB microphone. And the images I got were on google then I used Paint.NET to merge them together, and the short audio recording I got from a Video Game recording and I used this program to extract the audio from the video.
I've made several dvds over the past 12 months or so and this has not occured but on my latest venture I am getting a nano-second of the video picture narrowing from wide screen during each transition. It then almost immediately goes back to wide screen, causing something like a sideways blink. I am mainly using crossfades with the occasional circle wipes, clocks and spins. This does not occur, however, when using crossfade on the still images, which I pan and zoom, and include at the end of the video.
I am using a JVC Everio Camcorder with a Medion Akoya E600 D (MD8328) PC with Windows Vista 32bit.
I have tried several methods of creating the video file: Same as Project Settings, Same as first Video Clip, MPeg Optimiser and even custom, all with Upper Field First and all with the same result.
I've been editing with no problems for a while now but every time I try to share/create a video file it fails every time at 95%. I'm assuming it must be something specific for it to fail every time at the same point and i've tried it in multiple formats but always with the same result
I just installed VideoStudio Pro X4 on my Dell laptop with 64BIT, Windows 7 Home Premium. I am TRYING to use an EZCAP 64BIT device with my 8MM camcorder connected to it and "Composite" input selected as is appropriate in this connection. VideoStudio loads fine; select Capture tab, fine; click Capture Video, that loads fine with "Capture Video" flashing and waiting to be clicked again to begin capture, fine; I click "Capture Video," the icon changes to "Stop Capture," fine; I press PLAY on my 8MM camcorder; the video and audio begin, and I can see and hear it on my machine for approximately 8 - 10 seconds, then a box pops up with the message, "Unable to capture the file because it is copyright protected. OK"
I have been using X5 for almost a year and everything seems find until lately when I up graded my system to window 8.1. I have assemble a 40 min video but when I tried to use 'share' to output to MP4 iphone/ipad HD,the rendering go halfway then the VideoStudio crashed with an error 'The program has encountered an unspecified error' and a DMP file and ask me to contact Corel support. My project only has 1 video tack, 1 voice track and 1 music track and the project file is 17,426 KB. If I disable the voice track, then the project can render successfully. Since the voice track is recorded using VideoStudio voice over with WAV format, I went back and convert all voice into mp3 to smaller size but still crash when render halfway. My system should have enough resources to process this 40 min video.
Window 8.1 pro 64x 16GB ram CPU i7 Hard drive 2T.
I have assemble 40 min video with heavy voice before in XP and it render without any problem. Is there are issues between VideoStudio and window 8.1 64x ? Is there a limit to VS project size, or voice track size ? I read some of the posts and you recommend to manfully uninstall the software and reinstall the software. I am reluctant to do this, not at least after I can output my project to mp4, because it might wipe out my setting, templates, libraries, and even my project file. Do you know of any tool so I can read the DMP file ? I don't understand what good to have a DMP file when my software have passed the 30 day or 1 time support warranty?
It has been very frustrate to spend all this time to assemble a video and at the end cannot produce a sharable version. I was about to upgrade to X6 but now I have to think twice if this issue is not resolved. What good are all thees fancy new features in X6 to me if I cannot produce a sharable version of my project ?
The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis.
I just purchased Video Studio Pro X4 and I'm hoping it wasn't the wrong decision. We do a lot of voice overs and wanted to start adding subtitling and audio swap to our list of services. Subtitling with the software has proven to be easy, as well as the audio swap. But I've just ran into a problem that I can't solve (I'm an audio guy through and through...but my video skills are low)
Video Type: H.264 Baseline Profile Video Total Frames: 6,356 Attributes: 24 bits, 1280 x 720 Frame rate: 25.000 Data rate: 4836 Kbps Audio Type: MPEG AAC Audio Audio Attributes: 48000 Hz, 16bit stereo
I easily swapped the original audio for ours and wanted to render the video exactly as it was given to me. However, when I try using the option: "Save as First Video Clip" it gives me the error:
"The frame size (1280 x 720) of the video file does not match the settings and therefore cannot be trimmed." 18706:1:1
This happens on both of my computers (Windows XP & 7). Am I missing some codecs...my video cards not up to snuff, or something else? Again, I know little about video.
In Settings, I tried changing the project properties to similar settings as the original video, but the highest frame size it will give me is 720 x 480; and 'user defined' is grayed out. Not sure if any of that matters at all.
Lastly, yes I can manually type in all the info in the Custom option and can successfully render a video with similar specs, but I was hoping to just use the "Save as First Video Clip" option.
I need to burn video.... whenever i burn, it stop and appear unspecified error 5.0.0.
these are the spec: PAL ( 25fps) MPEG files 24bits, 720 * 576, 25 fps Lower Field First (dvd-pal), 4:3 video data rate: Variable ( Max 8000kbps) LPCm Audio, 48000 Hz, stero
After not having much luck with the last video card, I changed my video card to a device with the Philips 713x chipset
Now when I select video capture I get the following message: failed to initialize the video capture plugin Open driver failed (15200:43:0) (15023:4:2) cannot create the video capture filter
I have just installed card (SAA7130 TV PCI card) with latest drivers excluding the software so Video Studio 12 pro is the only capture software on the machine . I also re-installed both card and Video Studio after doing a complete system restore and used CC cleaner to remove any residual data before re-installing.
I need to use video capture within the Video Studio software as I need to use the scene detection functionality.The reason I had to change the card in the first place is that video studio only allowed me to capture in AVI 320x240 and gave 'capture failed' errors with anything else.
NTSC drop frame (29.97 fps) Microsoft AVI files 24 bits, 720 x 480, 16:9, 29.97 fps Lower Field First DV Video Encoder -- type 1 DV Audio -- NTSC, 48.000 kHz, 16 Bit, Stereo.
When the rendering completes, a "Catastrophic Failure" error code comes up. When I try to play the video in VLF, I get the following message
"AVI Index
This AVI file is broken. Seeking will not work correctly."
If I press "don't repair", the file plays, but the indexing bar does not run along the bottom of the player. Obviously something is wrong, but I can't seem to work it out.
The input files are as follows:
Video Type: H.264 video, upper field first Attributes: 24 bit, 1920x1080, 16:9 Frame rate: 29.970 Data rate: variable, 16,800 kbps max
Audio type: Dolby digital Attributes: 48000 hertz Layer: none Bit Rate: 256 kbps
I've tried uninstalling and reinstalling, with no luck.
I somehow caused my sound track to overlap. I can't seem to remove it. Down at the bottom of the picture looks like a white X on the bottom music track.
I hesitate to mess with it much because I had two video tracks and spend some time getting them synced.
I have noticed that it is possible to overlap sound clips. Just wanting to know does this automatically add fade to the end of the first clips and start of the second clip - my testing could not confirm that. Also is there some documentation on overlapping sound clips as I could not find anything in the handbook.
Also a possible problem I have encountered (I could repeat it too). When I add a video clip to the overlay track at times when I select it (left mouse click) VS Pro X4 appears to FREEZE and I cannot do anything within VS such as select something else. If I then select 'Show Desktop' (from the icon in my quick start bar) and then click anywhere in the desktop and then reselect VS from the bar at the bottom of screen I am returned to VS and it is not in freeze mode again.
I have a photo in large size and high resolution. However after I apply the Picture-In-Picture effect in Video Studio ProX5, it became very blurry. Already check all the Attribute settings and there is nothing wrong with the setting.
I used to use MediaStudio Pro to create picture in picture especially where the picture starts small and grows to cover the entire background video clip.
I looked for and found a video filter which I thought would allow me to do the same. However after viewing the 'help' for the filter and trying just about everything I could think of I cannot achieve what I want to do if start with a video clip and then have another video clip appear (very small) in one area of the background video and then slowly grow larger to eventually cover the background video clip.
I can make the picture in picture appear and grow larger but it covers the entire background video clip with black effectively covering it no matter what size my picture in picture is. I looked for a chroma key to cover the black out but could not find it.
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
I often encounter the low motion frequency when playing back "Picture in Picture" scene (which I mean the pictures aren't moving smoothly whenever using that feature) after I render my video into various formats, such as WMV HD PAL. Is there any way to increase its smoothness?
I am trying to use the FX picture-in-picture effect,but can't make it work. I see the inserted picture but not the background,the background is black!
I must say that the instructions are not very clear. It says: "Place the Picture-In-Picture effect on the clip that should be inserted in the background and place the background track behind it." ?
How do I place the background behind the clip afterwards? That's not possible.
So, I'm currently making a 3 minute news film at school, and am trying to add a picture into a video, so at the beginning of the news, I want to add a picture either right up or left up corner of the video something like this...
[URL].....
so,,, how do i insert a picture like that into a video?
and, additionally, is there a way to make it look like when transitioning the screen, the picture would magnify and fill up the screen.and the film begins
so in the example, the bread/snack picture would enlarge, fillup the screen and another video would resume.
I came across this one tutorial that I'm liking, but in many parts he doesn't explain enough. He just kind of says "Click this, press that. Toward the beginning of the video when he is playing with the rust picture to get just the rust to show, break that down for me so that I can understand the actual princibles behind that so I can apply it elsewhere.[URL]...
I made several good videos with a JPEG or PSD photo as the media and an audio file as the audio. This worked fine but recently all I get on the video is the audio without the picture. I have tried it on two different downloads of CS6 on different computers and it no longer works.
Even after installing quicktime, I am still unable to view any video loaded to Elements 12. I can hear sound but no picture when I hit play. No no thumbnail photo of video available either, just blank with play button.
I am using Windows 8.1. most of the video content was taken with an iphone.
Last year he had done a format C, but because he had recently changed the names of his multiple hard disks, he formatted the wrong one.
He had erased all of our pictures by mistake...
We were able to recover some of them but their are some problems, we can see the pictures in lightroom but then we see some warnings and cant change/access the pictures.
Some pictures have a question mark next to them (warning is: picture missing) and some have an exclamation point behind it (warning is: some problems have occur in lightroom while reading this picture).
I am not at all a lightroom user and even less a computer expert, but since all of my daughters pictures (since she is born) were lost, i hope to be able te retrieve some of them...
