VideoStudio :: Render Completed But There's No Video In Computer
Aug 28, 2013
source video
1080i(tv capped) format:ts 25 fps no audio
output optinos:
MPEG Transport-Stream Files
24 bits, 1920 x 1080, 25 fps
Frame-based
(HDMV-PAL), 16:9
H.264 Video
Video data rate: Variable (Max. 9900 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
i tried many times , sometimes the render was comple without warning or error , sometimes the render process was failed by the message "File format mismatch" . but there`s no output video in my computer in either way
View 3 Replies
ADVERTISEMENT
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Oct 30, 2012
I edited a wedding video that is over 90 minutes long (it was a wedding in Ireland). It was filmed in AVCHD on a pro video camera.
I wanted to produce a standard DVD and a Blu Ray copy to send over. The DVD copy rendered fine but the Blu Ray as well as the AVCHD file crashed every time and even crashed the computer to re-start. It crashed at around 30% in and I tried a number of different combinations to accomplish this render.
What I then did after a few attempts was to look at the last frame of the couple of files it did render to see where on the time line it was crashing.
It turned out it was on a transition I customised, I think using proDAD VitaScene. It was a transition that created a twinkling star effect from one scene to the next. As soon as I removed this one transition and it rendered a Blu Ray file with no problems at all.
One question though, I am not sure why there are so many choices of Blu Ray and AVCHD in the menu. What is the difference and which one would be the generally used one.
View 4 Replies
View Related
Jun 20, 2011
I have Video Studio Pro X3. I've never had a problem since I got it, but recently I've been trying to render video at 60 frames per second. I've looked everywhere online for tutorials but still don't understand how to do it. I keep getting 29.97fps in the end. I need it for a project and I need it very soon.I use MP4 video files at 60fps.
View 10 Replies
View Related
May 28, 2011
I am trying to render to DV 4:3 with video studio 4 but the finish video is missing a piece.
Video Studio 4
OS - XP
View 1 Replies
View Related
Apr 15, 2011
Why I cannot render a frame-based video when selecting (Share/Custom/MPEG Transport-stream)? My goal is to create an AVCHD video and burn it to a DVD (4.7G). My video is 16min long and the calculated bitrate is around CBR 15,000 kbps. If I use the (Share/ADVCHD/1920) option, I don't have any control over the settings. I have already deinterlaced my video using Neoscene. That is why I want to create a frame-based video.
Below is my workflow.
Two video sources:
.mov(1080p) from ContourHD 1080p camea
.mts(1080i) from Canon Vixia HF S100
1. Trim .mts files in CSV PX3
2. Trim .mov files in Contour S/W
3. Convert trimmed clips to .avi with Cineform Neoscene
4. Edit in CSV PX3
5. Planned to render in AVCHD, 1920x1080p, 29.97 fps, 15000 kbps
View 5 Replies
View Related
Nov 24, 2013
I have been using X5 for almost a year and everything seems find until lately when I up graded my system to window 8.1. I have assemble a 40 min video but when I tried to use 'share' to output to MP4 iphone/ipad HD,the rendering go halfway then the VideoStudio crashed with an error 'The program has encountered an unspecified error' and a DMP file and ask me to contact Corel support. My project only has 1 video tack, 1 voice track and 1 music track and the project file is 17,426 KB. If I disable the voice track, then the project can render successfully. Since the voice track is recorded using VideoStudio voice over with WAV format, I went back and convert all voice into mp3 to smaller size but still crash when render halfway. My system should have enough resources to process this 40 min video.
Window 8.1 pro 64x
16GB ram
CPU i7
Hard drive 2T.
I have assemble 40 min video with heavy voice before in XP and it render without any problem. Is there are issues between VideoStudio and window 8.1 64x ? Is there a limit to VS project size, or voice track size ? I read some of the posts and you recommend to manfully uninstall the software and reinstall the software. I am reluctant to do this, not at least after I can output my project to mp4, because it might wipe out my setting, templates, libraries, and even my project file. Do you know of any tool so I can read the DMP file ? I don't understand what good to have a DMP file when my software have passed the 30 day or 1 time support warranty?
It has been very frustrate to spend all this time to assemble a video and at the end cannot produce a sharable version. I was about to upgrade to X6 but now I have to think twice if this issue is not resolved. What good are all thees fancy new features in X6 to me if I cannot produce a sharable version of my project ?
View 6 Replies
View Related
Jun 3, 2013
I'm using VS x5.
Basically, I have a Sanyo HD camera which I've used to capture quite a bit of holiday footage. I've edited some together but when I output the project to either mp4 or mts the picture is choppy when panning.
The camera was set to 1080p @ 30fps (there's no option of 25fps even though the camera was bought here in the UK) which I have matched by choosing the "Custom" option when creating the movie. I've matched the bitrate (16789bps on the source) but this ends up being 15540bps on the output file. (??) According to the properties on the source file it's 29.97fps which I have also matched in the Custom settings option.
I understand I should expect dropped frames if I was trying to output the file as PAL compliant, but I've got VS set to NTSC so I don't think this is an issue.
The source file is mp4 and looks fine when viewing the panning scenes.
PC Spec:
Intel quad core 2.4Ghz
4Gb RAM
ATI Radeon 5430 Graphics card
2TB SATA HDD
Windows Ultimate x64
View 14 Replies
View Related
Jul 30, 2012
Given that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
View 1 Replies
View Related
Dec 30, 2011
(1) whether VS Pro X4 will support the 3D video clip taken from Panasonic HDC-SDT750 3D capable camcorder?
(2) If it is supported by VS Pro X4, how do you render or burn the 3D video file onto BD disc so that it would be recognised as a 3D video format disc and playable in a 3D Blu-ray player?
View 2 Replies
View Related
Mar 2, 2011
I am editing a video using VS X3 and am using both AVCHD 1080i and AVCHD lite 720p clips.
What would be the best format to retain quality when I render as a file and then copy onto a USB stick to play on my Bluray player? My player seems able to read most formats.
View 7 Replies
View Related
May 9, 2011
I'm trying to render MTS clips into an AVI video
Project Properties -
NTSC drop frame (29.97 fps)
Microsoft AVI files
24 bits, 720 x 480, 16:9, 29.97 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- NTSC, 48.000 kHz, 16 Bit, Stereo.
When the rendering completes, a "Catastrophic Failure" error code comes up. When I try to play the video in VLF, I get the following message
"AVI Index
This AVI file is broken. Seeking will not work correctly."
If I press "don't repair", the file plays, but the indexing bar does not run along the bottom of the player. Obviously something is wrong, but I can't seem to work it out.
The input files are as follows:
Video Type: H.264 video, upper field first
Attributes: 24 bit, 1920x1080, 16:9
Frame rate: 29.970
Data rate: variable, 16,800 kbps max
Audio type: Dolby digital
Attributes: 48000 hertz
Layer: none
Bit Rate: 256 kbps
I've tried uninstalling and reinstalling, with no luck.
View 2 Replies
View Related
Jun 28, 2011
Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
View 2 Replies
View Related
Sep 25, 2011
VS X4 Ultimate still has a very annoying bug that I noticed already in VS X3.
Here it is.
I have a very simple project: 1 AVCHD clip (1920x1080, 25fps, interlaced), preceded by a simple title on black background and followed by another title on black background. The clip and the 2 titles are connected by transitions (standard transition provided by VSX4). No effects are used. The audio of the clip is muted and a WAV file is placed in an audio track. I rendered into AVCHD interlaced 1920x1080 (the standard template from Corel) and I can see a place-holder of the final file in Windows Explorer: the file has size 0KB because the VSX4 is currently editing it. At the end of the rendering, the file disappear! NO file is created and VSX4 gives NO error message. Notice that the same behavior did not happen with another video clip, same characteristic (I just used the same project and replaced the video clip). The other video clip is taken from the same camera, with no different setting, and imported to the PC at the same time. Also, on the PC there is enough space to store the rendered file.
This is the part that mostly piss me off: I can accept that could exist some issue with the video clip, or the chosen transition, or whatever else... but what I can't really digest is that if anything goes wrong, the SW creates no file without reporting any error message, like if everything were ok.
View 3 Replies
View Related
Feb 1, 2014
I can't find the location of the videos I export/render on my computer. How to change the location of where to save them. I used premiere elements before I used premiere pro. The interface changed on pro and I'm falling way behind on projects.
View 14 Replies
View Related
Feb 9, 2013
I am a student in animation and media design. I have used photoshop in CS4 to animate in the past then I switched to creative cloud.
Another student thinks that I am getting it to render and its playback is just to fast for me to see but I have adjusted the settings and used different formats but it is all the same. What else could it be?
View 1 Replies
View Related
Jul 26, 2012
I can render out the same video (same quality) in both PS CS5 and PS CS6, and in CS6 the mov file size will be about 10X bigger. How can I get CS6 to render out a smaller file size mov?
examples (random ACS comertial/video from youtube)
[URL].........
[URL]........
View 3 Replies
View Related
Apr 29, 2008
I just reinstalled my photoshop after formatting my pc...
installed photoshop, went to render one of my animations to a video file like iv done before, but when i go into the render options.. the quicktime export options im not able to use....
View 2 Replies
View Related
Aug 9, 2011
In Max 2012 how to I render a transparent video?
View 4 Replies
View Related
Jul 24, 2013
I've got a problem with a Photoshop CS6 version I use in my office (Windows 7). Everytime I try to export a video from the timeline to use an image sequence on a graphic software it keeps crashing. The video render initializing starts and stops more or less at 80%.
If I cancel it, I cannot use Photoshop again as it keeps restarting at anytime only for stopping itself always at the same point. So I have to force it to close with the task manager.
View 1 Replies
View Related
Nov 8, 2013
I am trying to render a video from layers I made from a quicktime. The problem is that all of the layers are on top of each other and take up the whole length of time instead of each being one frame sequentially after each other. So, when I render or do a DPX sequence it is only one frame played for 6 seconds. There are 167 layers (frames) so I would rather not have to adjust each layer back one frame at a time.
View 16 Replies
View Related
Mar 7, 2014
I am wanting to render video with the H.264 codec. Then I am wanting to copy this file and place on a DVD. (No Authoring in Encore). I have done this several times and the video is choppy. The file plays normal when it is running from the hard drive.
View 4 Replies
View Related
Sep 7, 2012
I can see that the render video options are vastly different in OS X and Windows versions of PS CS6. Not only they are different layed out but as far as I can see a wide range of codecs are missing on the OS X version.
In particular, how can I export a video file using QuickTime container and H.264 codec in OS X version? If You select H.264 video it creates an .mp4 file whereas I wnat a .mov file. Same codec but different container.
View 15 Replies
View Related
Sep 30, 2013
MacPro1,1 (32bit kernel, 64bit OS X 10.7.5)
x5355 8-core 2.67GHz CPU,
32GB RAM,
4-Drive RAID0 System and data drive (four new 3TB Seagate Barracuda [fast] drives)
GTX 570, 1.3GB - Recognized by PhotoShop for OpenCL and OpenGL
PhotoShop CC (v 14.1.2 x64) Trail (about 5 days into it)
1) I can open a video and play it back at the speed of the video.
2) I can not get playback faster than 1 fps if there are any filters applied - the pre-render / buffering isn't working at all.
3) I can not "Render Video" by choosing either "Render Video from the menus or the Export Arrow button in the GUI.
As soon as I select either I get a Progress Bar that that says "Initializing Video Export" but never finishes. I have waited as long as 4hrs and still no dice.I've tried with more than a few different videos and the result is always he same. Here are three of the videos I have tried with:
P00001_Cell-cell-cel..
P1020060-25p_ReEncod..
The_1st_12hrs.mov
View 9 Replies
View Related
Jun 7, 2012
I'm trying to use the export>render video feature in Photoshop CS5 extended. I must use avi without any compression, keeping the original frame rate (the original file is also an uncompressed avi). My impression was that this setting keeps the original video quality.
However, the exported video loses quite a bit of its original quality. Is it possible to keep the original quality?
View 6 Replies
View Related
Oct 17, 2012
I can't find how to add or edit render video presets used in (File->Export->Render Video) dialog.
Am I missing something?
View 5 Replies
View Related
May 26, 2011
I have a 3d animation project I created successfully in PS CS4. It has a transparent background. I need my final movie in a .SWF format. In photoshop,when I render the animation to video (.MOV) it renders with a black background, loosing the transparency. How can I render this to video with the alpha channel intact so that the background is transparent?
View 2 Replies
View Related
Jul 19, 2008
I'm in the render video dialog and quicktime option is disabled.
It wasn't a little while ago when I was playing.
I can not find in the help topics why.
Might somebody be able to help me un-disable it?
View 1 Replies
View Related
May 15, 2011
I try to render an environment Map with video post processing. But i cant get it to work. The background (here created with an nebula script) is just white after rendering, the standard render works. Look at the screenshot, i think it will explain my problem better then my poor English vocabulary is capable.
View 2 Replies
View Related
Jan 31, 2013
I am working with the animation sequence where I have a video file linked to the object (camera moving through the room showing a TV screen on the wall with a move playing on the TV screen, the movie is linked .mov file). When I make the rendering using the BB everything works fine if I just use one server (the one where I have the main max installation, where all the maps and linked items are located). As soon as I try to use other BB servers in the network I get the error message referring to the linked .mov file. I have the Include Maps ticked in the Network Job Assignment window and if I change .mov video file to static image like. jpg the network rendering works without problems. How and where the .mov video should be set to get the BB network rendering to work correctly in distributed rendering.
View 4 Replies
View Related
Mar 11, 2013
I am using Elements 10 for the first time and am a true beginner at this. I am trying to add multiple effect onto the beginning of a video. Do I have to render the whole video every time I want to watch what I added to the video? The video is 45 minutes long and I am only working with the first 5 minutes of the video. I am guessing if I cut and remove the 40 other minutes rendering with not take so long but, how do I save the other 40 minutes so I can re-attach it when I am ready to work on it?
View 2 Replies
View Related
