Revit :: How To Produce And Create Bill Of Quantities
Apr 25, 2007
Which is the best way to produce and create Bill Of quantities from revit and update progressive day to day work that already done for example i can use a give composite layer and give a material on it so by using a takeoff material i can easily dive a quantities but the problem is i can't monitor progress because brick and plastering can't do at the same time.For the moment i just draw 2 different type of wall so i just can remark it accordingly, if there a better way to do this?
I was wondering, after I make a walkthrough in Revit, Is there a way that I can produce the walk-through into a video which I can open separately (like with windows media player rather than through Revit). If so, how?
I wanted to give a little presentation of the building I had created by showing people a walkthrough of the model, however I thought it would look unprofessional if I have to present it within Revit.
Win7 Enterprise 64 bit Illustrator CC 17.0.1 64 bit
After placing an image into a new document within Illustrator. I trace the image and expand it. from there I attempt to Alt-click on the unite shape mode to create a compound shape.
I am using AutoCAD 2014. We were recently asked if there is a way to automatically update bill of materials if you change or add materials in a drawing. Bill of material is not necessarily in the same drawing? Do I need to create a table?
We normally just create a bill of material separately from the rest of the drawings in AutoCAD. They also want to be able to export it to exel
When i use the BOM feature, i get a list but cannot get panel sizes as dimensions in a table. I can get a part ID and other not so important in for for a BOM but dimensions and sizes should be key.
How can i get a detailed BOM to include panel sizes (like a cut list).
I am drawing water pumping stations for my company, and they are wanting to do a "Bill of Material" for each job. But they are wanting to do it through the block attribute system in autocad. This actually seems more time consuming than just counting the parts and inserting the new quantities in a table.
I am drawing these with 2 and sometimes 3 views.....the problem with that, I would draw 3 views of a valve (3 blocks), and It counts it as 3 different valves.
I am seeing this "varies" message on certain items in my BOM but can't tell where the incosistencies are. The strange thing is that my part number LCVINYL is showing the correct length of material while the Unit Quantity is showing "varies". Normally this would make me think that the inconsistency is in the name only. Where should I be looking to correct this?
BTW all of these LCVINYL parts were created in the frame generator if that matters.
I have an assembly which includes another one assembly also. So the issue is when i am generating the bill of material, the assembly which i have attached to the main assembly showing as single item with the assembly name.
The sub assembly i have attached to the main assembly by place and constaint option.does that making the problem ?
I changed the names and locations of my parts in an assembly, opened the drawing, and found all of the parts and names. I then looked at the parts list on the assemblies in the drawings. Even though the assemblies updated, the part name did not update. How do I update the BOM to match the assembly (I thought it would do this automatically?)?
I have tube and pipe subassembly in my assembly. When I see my BOM, each route is a subassembly but some not, and went I add balloon on pipe from "this not subassembly but in realy is one" it give me the same item number for each pipe generate in this route.
How can change this "fake" part to assembly for BOM?
How & where I can add fields that I require for my equipment. I see I can add it to the bill of materials in the assembly but that doesn't carry through to the drawing.
I see that I can add to the parts list in the drawing but i don't want to have to add the information into my drawings every time I use one of my machines.
Basically I am busy creating a library of all the machines I use. This library will then be used for numerous drawing for many different clients. I need the required info to be in my drawing from the beginning without me having to add it to every clients drawing.
We are currently working on a very large master development plan submittal here at work. As part of the MDP, we are expected to deliver quantities calculations to the client.
I don't particularly feel like going through our entire proposed subdivision and counting up water fittings and whatnot. I am working on a dynamic block (attached in 2012 file format) that has visibility states for all of the different water fittings that we will be using for this project.
Is it possible to use either a lookup parameter or a block properties table to produce a quantities count, so to speak? I.e., to somehow get a count of all of the instances of this block in a particular drawing and how many instances are in what visibility state? So this table would tell you 1/32 bend: 15, 1/4 bend: 35, etc.
I have an iassembly with iparts in an .iam file and I went to make a shop drawing of this assembly. When I go to do this, I get my parts list showing all versions of the iparts, even the ones that are not used. It will show a 0 in quantity.
This is under the "structured" view and I do not see a "pars" tab, which is what I've read I need to look for.
I've read that I have to be very careful with the way that I create iassemblies and iparts, How to make a drawing with a BOM that only shows the parts currently in use.
I have a problem with Bill Of Materials in drawings.
I want to show a structured list of the top level components in this general arrangement. But whenever i select a view for inventor to create the table it only gives me to option for 'Components Only.'
I have edited the assembly and switched off the 'Components only' option in the IAM, but it still will only let me put a parts only BOM into the drawing. I have right clicked the node in the IDW browser and selected 'bill of materials' and here i have also switched off 'parts only' but still the same.
We are just starting to use the pay items through QTO Manager & Takeoff. Everything was working fine until...I deleted a hatched area that represented a Butt Joint quantitiy. Now when I go into Compute Quatity Takeoff & select the Compute button, this quantity that was deleted is still there. And, since it is now deleted, I can't find a way to remove it from the Butt Joint quantity. I've tried using "Removes pay item from specific objects." I've tried deleting all my quantities and starting from scratch.
I have a purchase component set that includes 2 identical pcs. i.e. part number xxx01(.iam) consists of part01(.ipt) and part01(.ipt). Typically I would place xxx01(.iam) into an upper level assembly, and get a BOM count of xxx01 QTY = 1. This works fine.
Now I have a similar component xxx02(.iam) that includes part02(.ipt) and part02(.ipt). With this component I use only half of the purchase component set in many instances. Therefore I would like to have the ability to place part02(.ipt) as a single part and have a BOM count of xxx02 QTY = 0.5.
The best solutions I have found is either to place xxx02(.iam) and manually override the BOM count to 0.5, which is error prone, and inevitably causes an issue each time.
Or I can set the Part Number of part02(.ipt) to be xxx02, and create a User Parameter in part02(.ipt) called BOM_QTY and set it to 0.5 ul and then set the Unit Quantity (using the BOM tab of the part file's Documents Settings) to use the User Parameter. The result of this is a BOM count of xxx02 QTY = 0.5ul.This method displays ul in the Parts List, which of course is an issue as well.
Im trying to generate a list of parts and assemblies that has all the quantities included in it.Ive found that if i use the structured view it does not multiply the part count by the number of assemblies, so if i export the bill of materials i wont get the actual number of parts that i require.
If i use the parts only list then it wont include the sub assemblies.the job that im working on has hundreds of sub assemblies and thousands of parts so manually adding them up is not an option.Using Inventor 2014 Pro.
There is import button which is import column schema (xml file) from file on Bill of Material window... Is it possible to make this within API, VB Express 2010.
In five years using Inventor I've never seen this- I can't get it the parts list or BOM to register the quantities. Each box comes up with "Unknown Error" and it will not allow manual override to update those quantities.
i basically need to extract all the blocks and quantities used in a drawing as the drawing we make are usually really big and takes time to pan around to count all blocks.
I have created a building pad on my site and need to extract fill quantity. I set the elevations on my building and created a 5:1 grading object. to the existing ground.Autodesk Instructions are, for the actual building footprint, that I need to create a grading object at 1:1. for the area covered by the actual concrete pad. Need screen shot of the style settings of this grading criteria. because the area is flat it is impossible to determine if the floor area has been built. When I run sections and create volume reports the only fill quantity is from the grading objects that slope out from the pad. I must be overlooking a setting in the style for 1:1.
I am trying to generate my quantities by creating sections with template to do the cut and fill, however after i create the corridor and the corridor surface which should use the bottom of the curb, instead it is using the top of the curb. How can i change it so that it uses the bottom of the curb. It is a road crossection which i used from toolpalette, CIVIL3D 2012
I'm trying to find the quantities of blocks on drawing. I used "quick select" command - select by Block Reference. My blocks have some customer’s attributes (for example type of block) which I couldn't find on block reference list.
I've edited this message: one complaint has been removed - it was my mistake - conroy.
Photoshop 13.0.1 OS X 10.6.8
16 bits per channel RGB mode.The Lighting Effects filter quantities the optional height-map channel to 8 bits, which can result in a very obvious terraced-slopes appearance and moiré.
I am using Civil 3D 2011 for my job. I am trying to put together preliminary estimates and need earthwork qunatities. I have no issue importing a google earth surface. I import the surface and create a boundary. How do I calculate cut/fill quantities? I tried creating a finished ground surface then making a tin volume surface to compare the two. However, I do not know how to create a fnished ground surface. I have also tried grading in civil 3d. Cannot get anyting to work.
