I am wondering if there's a way to keep horizontal mullions from being cut off square with the main vertical profile. For example, if I had a custom shaped cap, like a tapered shape, or a T shape, could the horizontal mullions cope to fit it somehow?
View 2 RepliesHow can i get horizontal mullions to cut through vertical instead or reverse?
View 2 Replies View RelatedI am learning Revit on my own and I am a total beginner. I am trying to create dome roofs like these: URL....I'm trying to use massing, but am not able to apply a roof over it because theres an error something about being vertical.
View 4 Replies View RelatedI made a metal standing seam roof by putting mullions on sloped glazing roof. Is there a way to extend the mullions past the edge of the perimeter of the roof?
View 4 Replies View RelatedI'm working in Autodesk Revit 2013, just trying to learn whatever I can.
For the life of me, I cannot get the mullions to miter together properly. What I have is a situation (within a sample project from Revit OOTB) where on a curtain wall, the lower horizontal mullion and originating end vertical mullion do miter at their corner. The curtain wall is attached to the floor decks below and above. However, nowhere else will other horizontal and vertical edge mullions on the grid miter together for a smooth junction. I fail to see how Autodesk themselves can get only one corner out of 4 to work properly, and furthermore, let this program out on the market with such a nerve-wracking anomaly within their product.
I've been working on a saved-as copy of one of Autodesk's sample projects. How to get mullions to work properly, consistently?
how i can align the grids and mullions in a curtain system of a curved glass roof?
View 3 Replies View Relatedis it possible to make a new document and instead of having it shaped like a rectangle/square, to have it shaped like a octagon? I'm making a square shaped business card, but I want the right side of the card to have a zig-zag pattern cut out on it.
View 2 Replies View Relatedi'm trying to create a custom shaped viewport. Instead of using just a rectangular viewport I need to make it polygon shaped. I know I've done it before but for the life of me I cannot remember how. I'm using ACAD MEP 2011.
View 5 Replies View RelatedI have made a stair by sketch, an u-shaped one. I do have some problems with the 3d model. it will not show up correctly. I add some print screens and you can see.
View 3 Replies View RelatedI've created an irregularly shaped mass (column corbel) within a project and would like to make it a concrete object. How do I do this?
View 1 Replies View RelatedCan we produce a Horizontal curve table like the attachment Table 1 and i have another queries could Civil 3d Produce a table like the attachment Table 2 i know i can get this table by lisp or macros.
View 2 Replies View RelatedI am creating a dynamic block to do details for structural framing. Attached is an example that I am stuck on. the widget plan and end plan went pretty good. But when I got to creating a cope on the ends I got stuck. I am attempting to stretch the required cope as you can see in my attached drawing. For some reason I can not get the end line to move with the horizontal cope line.
View 4 Replies View RelatedIn Revit sections, we can add split segment in plan.
How can we show the Horizontal sections in sectional view and how can we split the horizontal section such that the drop is vertical.
I know that one workaround to show vertical drop is to use plan region on the Horizontal Plan View. But is there a better way? If not is autodesk looking forward to incorporate this in further releases?
Alright, I made a custom bookshelf to fit under my stairs, however, when I created them, I made them on a horizontal plane, so when I loaded into my project, my book shelf is laying down in the middle of the living room floor, which was fun at first, but nearly an hour later I am not so amused. Is there a way to flip it vertically or do I have to remake the whole bookshelf?
View 4 Replies View RelatedWhat’s the best way to tackle horizontal screen? Would I use a beam or Component/Model in Place and just extrude it?
View 4 Replies View RelatedI am trying to find a way to control the leader line of a multi-category tag such that the second line of the leader is horizontal - my users are spending too much time to make our leaders look better than "sloppy".
I do have a Keynote family that can accomplish this but I cannot find the same for the multi-category tag. And I cannot find a way to make my Keynote tag a multi-category tag.
Can I have use both the horizontal and vertical secton tail in the same project? When I change the tail in one system family it changes the tails on all the types.
View 1 Replies View RelatedI have a situation of one sloped floor connecting two horizontal floors. They build together a continuous surface.
I need to join them and have the layers be continuous along the structure. If they were roofs, no problem, I could use the "roof by extrusion" command.
Should I do that? If I try to use floors.....
When I model them as three separate floors, and then Join them, it doesn't work. meaning that the layers within the floor don't match (well, they can't, in fact! I have to move the floor behind!)
If I model one single floor and then add split lines, and move them... it does work. BUT..... I have a stairs on top of it! the stairs have a different slope than the floor, and i need to build a variable layer that fills the void between the floor and the stairs.
So my hypothesis was: I put a sloped floor through the slope arrow... and then adjust one variable layer to do the inflill...
My dream would be to join then floor and stairs.... The material is the same
I have a client who wants to see a more realistic representation of the direction of the planks in her floor. I cannot figure out ow to do this. I have succesfully changed the direction of the beam system under the floor, but cannot change the direction of the floor panel. I have tried the folllowing:
1) Going into sketch mode and changing the beam support direction.
2) Changing the pattern in the materials fsettings from horizontal to vertical.
I want to move my horizontal hatch lines so they align with the top of my windows.
View 1 Replies View RelatedI have done my studs for my wood frame, However, under blocking, when I tick "generate horizontal elements" and select OK, it tells me that there are identical instances in the same place, this will result in double counting in schedules.
View 1 Replies View RelatedIs there a way for a label (detail number/sheet number) to rotate with a section tag rather than remaining horizontal?
Is there a way for the same label to flip along the main horizontal reference plane of a section tag?
We do not use the traditional circle head and when the head needs to rotate or flip the 'pointer' lands on top of the label.
I think I have exhausted all combinations of checked/unchecked boxes for 'Keep readable' and such.
I would like to know whether it is possible (and how) to trim a wall that was generated from mass face to a roof (also generated from face mass) or/and make a horizontal hole in it. The wall itself is not straight or curved, it shifts outwards from the building from base to top (still in an elevation it looks like rectangle).
View 2 Replies View RelatedI am trying to create a window block that stretches both mullions horizontally and vertically. I figured out how to get both to stretch horizontally but when I try to stretch vertically I get a really funky skew thing happening.
View 1 Replies View RelatedWith 2 different types of curtainwall joining at the corner, we are unable to have the horizontal mullion mitered join with the vertical corner mullion.
Is there a way to cut of the redundant bit?
Solution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
View 1 Replies View Relatedgetting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
View 1 Replies View RelatedI am creating a scale model for a laser cutter using 1/4" mdf. So my drawing needs to be 1/4". How do we change the Revit custom scale to 1"=1/4" OR 1/4" = 1/4"?
View 1 Replies View RelatedIs it possible in Revit to do custom shape graffiti? In shape of rhomb, for example.
View 1 Replies View RelatedI am trying to create a custom detail line, if possible?
Is there any way to create a custom detail line which will be a dashed line (similar to Hidden) as well as containing arrows every "X" feet or inches. i am attaching an image that is what i would like to create so i don't draw from scratch.
I would like for it to function as a line, spline, shape, whatever the needs may be.
Is the anyway to keep the body of a custom Elevation tags to stay horizontal as do section tags?
View 7 Replies View Related