I am trying to create a window block that stretches both mullions horizontally and vertically. I figured out how to get both to stretch horizontally but when I try to stretch vertically I get a really funky skew thing happening.
View 1 Replies
I have Architecture 2009 and my computer needed to have my profile rebuilt. Now I am unable to tile my acad drawing horizontally or verically like I used too. I tried to rebuilt the file and reinstall but that doesn't seem to work. Also rather than opening at least 2 drawing (or more) now results in seperate sessions rather than 1 session with 2 or more files. What the setting is that I need to update?
View 5 Replies View RelatedI find at least once every project I need to do something like this (skewing/forshortening). If I make a section view of a set design (cutting right through the stage), I'll do that by taking my set elevations and skewing them.
the solution, painstakingly outlined in VIDEO FORMAT, and annotated..?
When you get back up and running, here's a full demo of both the 2D and 3D methods described [URL] ......
Is there a way to align more than 2 objects either horizontally or vertically? I've used the ALIGN command and I can't get it to work. I get a message that says something like: "all 3 destination points are colinear".
I can get it to work if I'm just aligning two objects.
For instance, say you have four boxes, scattered around model space, and you want to align the left edge of three of them to the left edge of the fourth box, without moving them vertically. In other words, can you "left justify" all four boxes?
a routine that has the option to break vertical or break horizontal, depending on the option, the lines that cross either the horizontal or vertical (again, depending on the option) a specified distance (say .05) on either side of the line you wanted to keep. So if I choose BREAKH, the vertical lines that I choose would break any horizontal lines that cross them. Same applies to BREAKV. Hopefully I communicated clearly enough.
View 9 Replies View RelatedI'm just getting to grips with paths.
I have created a path, which I want to copy, then flip the copy in the vertical axis, then join it onto the original, yeilding a path that is vertically symmetrical.
I can create the path OK, and I've figured out how to copy it.
BUT .... when I go to Edit > Transform Path ... the flip vertical and flip horizontal options are greyed out.
What am I doing wrong?
I'm using CS4 Extended v11.0.
I use tile on 95% of my jobs. It is a waste of space when I tile all vertical pictures because I do not have the choice of Tile Vertically or Tile Horizontally as on previous version of Photoshop.
I tried the different choices offered on "arrange document" and there is non with the vertical choice, unless you choose one that displays my photos some on one size and the remaining or two or three remaining, a different size to fill up the screen.
any gms or script to swap files hor as well as vertically.
For instance, left side circle and right side rectangle if you swap horizontally then left side comes rectangle and right side comes circle.
I have created an intriquite pattern. How do I copy it vertically and horizontally and make it appear seamless?
View 1 Replies View RelatedCan I merge two photos vertically instead of horizontally?
View 7 Replies View RelatedHow do I enlarge a text or color box vertically or horizontally?
View 2 Replies View RelatedHow can you use the reflecting nodes horizontally or vertically nothing is happening when I click the nodes how do you make the nodes snaps horizontally or vertically so that your drawing look symetrical.
View 14 Replies View RelatedI want the selected object to be halved exactly either horizontally or vertically.
View 14 Replies View RelatedHow to make a dynamic block of a callout stretch as text is inputed?
For Example:
(TEXT)
(THIS IS MORE TEXT)
(THIS IS EVEN MORE TEXT)
I will attach a dwg of the callout.
I'm trying to create a dynamic block that stretches between a minimum and maximum height. The block I'm trying to create is an "Acrow Prop" which has a height that ranges between 1050-1830mm. Is there any way to set a function that will stop stretching out side of these figures?
View 1 Replies View RelatedI created a dog leg laundry door and window and finally got it to work but when I open the door the window pane moves with the door, also the window does not show up in the plan view. The cut plan is set at 1400 and the window sill is at 1200.
Have a look at the dwg file
When you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View Relatedwe have a rectangle 0,0 - 200,100 with a triangle inside 0,0 - 100,100 - 200,0
[/] <- for example
A dynamic stretch action is applied to the x of the rectangle, how do you scale/stretch the triangle with the rectangle and only on the x axis, so the triangle remains symmetrical from the middle of the rectangle on the y axis even when the rectangle is stretched?
Looking for a solution that doesn't involve inserting the block and scaling?
I need to select a block in AutoCAD, and move it up or down vertically. I can get to the point where I have the user select a particular block, but after that, how do I get a reference to the block selected so I can move it up or down?
View 1 Replies View RelatedGIMP is in single window mode. The bottom of the window extends down below my screen window, below my taskbar, so I can't grab it with my mouse to pull it up and make the window smaller vertically. I have pulled the top blue bar up as far as it will go, but not far enough - How do I shrink the GIMP window vertically?
View 3 Replies View RelatedI have a block that I want to show on a vertical exaggeration of 10x. How do I make it so that a block has a Y scale of 10 without the attribute text inside the block being stretched in the Y direction 10x?
I would like to use a Y scale of 10 rather than a block with 10x the length because I have a field that returns a length parameter and I don't want that value to be 10x what it's supposed to be, and it would make things much easier to not have to multiply my values by 10x each time I use the block.
I've got two polyline rectangles next to another. When I move the other one, the next one stretches with the one that is moved and that is not what I want.
View 5 Replies View RelatedI have encountered a strange symbol that affects lines:
2 little blue boxes. What happens when i see these symbols, If I move a line and it's connected to other lines it will latch onto them and effectively drag them. I don't want it to do this, I don't know what to search for, spent a few days trying to find what it is because it nearly ruined a whole development!
Running autocad 2013. Here's a picture:
print.jpg
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
Program: AutoCAD 2010.
Wide screen monitors seem to stretch entities on the AutoCAD screen.
Is it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
I made a write block from one drawing so that i could use it in another drawing. Now that i have inserted it into a different drawing i cannot explode it. I did not see the option to allow exploding when i created it.
I tried to create a regular block (not a write block) but then when i opened a new drawing and clicked "insert" "block" it was not in the list of available blocks?
In AutoCAD Architecture 2012, is it possible to change the 3D window block from standard white color to another?
View 6 Replies View RelatedI'm not able to see the values of attributes in my Properties Palette. When I select the block, I would like to see the associated attributes show up in the "Properties" window; however for some reason they do not.
This happens with all blocks and I checked the constant. I'm thinking it's a Variable but don't know which one.
Is there a way to create a thumbnail for a block that looks like the block when in a drawing rather than exploded when written to a file? All of the hidden attributes are currently being shown in the thumbnail using Wblock.I'm using AutoCAD 2011 to create blocks and thumbnails for a program called WireCAD.
View 9 Replies View RelatedI am having some troubles whit my dynamic blocks. Whenever I add a block property table the window that should be opent doesn't open. The strange thing is that I think it actualy is open but i just don't see it on my screen. The same thing gous for the screen that allows you to ad a parameter to a lookup set. by folowing this link you can see what i mean, it gets interesting after 30 seconds.
[URL]
Is there a variable that decides where on your screen you see these screens?
