I am learning Revit on my own and I am a total beginner. I am trying to create dome roofs like these: URL....I'm trying to use massing, but am not able to apply a roof over it because theres an error something about being vertical.
View 4 RepliesI am wondering if there's a way to keep horizontal mullions from being cut off square with the main vertical profile. For example, if I had a custom shaped cap, like a tapered shape, or a T shape, could the horizontal mullions cope to fit it somehow?
View 2 Replies View RelatedI'm trying to create a simple shed roof attached to the sloping walls of a rectangular building. 4 walls, south wall 10' h, north wall 11" h, and the east/west walls joining them are therefore sloped.
I want to attach a simple shed roof to the top. Here's how I think I should do it:
1. create a new workplane aligned with the top of the walls.
2. switch to that workplane.
3. use "Roof" - Extrude" option to create the roof.
Assuming I'm correct in my steps above, I should be able to create the roof.
QUestion - How do I CREATE a new workplane where there is no object already to choose? Program won't let me create a workplane in workplane viewer by picking the tops of the four walls (in any of the tiled views). What am I missing?
I am currently working on a home where i need to have a single slanted roof go across the perimeter of the home to form a roof. But, i have run into the issue of not being able to connect the circled area(see attached) Is it possible to connect those separate roofs and if so how?
View 1 Replies View RelatedI have recently started using AutoCAD so I'm still figuring it out. I would like to create a line like this
¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯ and another one like this ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ (where the Vs link up with the line).
I have tried to do this through the lin file and have failed. The lines don't meet up, the gaps aren't in the right place and the line does not run along the top but in the middle: I have fiddles around with it but it complicated and long to do. I have also investigated creating these lines using express tools but it seems that this tool is not an option in AutoCAD LT 2010.
How do you get the roof soffit to have the same rafter cut as the roof?
View 1 Replies View RelatedWe have just made the switch to Revit 2013 and the first order of business is creating a template. I, as is my entire office, is learning as we go. I have followed the No Experience Necessary Revit book which was fantastic.
Now, at the beginning of creating my template I am stuck.
I edited the elevation marker and saved a new copy into my standards / prototype folder on my server. I customized it to look just like our CAD elevation marker, great...
I have the family loaded in the template.
Now when someone clicks on the elevation marker in the ribbon how do I get it to load mine instead of the default Revit one? Otherwise, I know I am going to find inconsistencies on our drawings as staff goes to that button.
creat roof with same line on top roof face & roof vertical side face?
View 2 Replies View Relatedis it possible to make a new document and instead of having it shaped like a rectangle/square, to have it shaped like a octagon? I'm making a square shaped business card, but I want the right side of the card to have a zig-zag pattern cut out on it.
View 2 Replies View Relatedi'm trying to create a custom shaped viewport. Instead of using just a rectangular viewport I need to make it polygon shaped. I know I've done it before but for the life of me I cannot remember how. I'm using ACAD MEP 2011.
View 5 Replies View RelatedIn AutoCAD LT 2008 is it possible to create an irregular shaped viewport?
View 2 Replies View RelatedUntitled-1.cdr
I need to create a smooth border line the same shape of the inside of this cutting die which I have scanned......slightly small than the inside (White Part) How do I achieve this? I have tried power trace then created a boundary to make the shape but the line is uneven.
I have made a stair by sketch, an u-shaped one. I do have some problems with the 3d model. it will not show up correctly. I add some print screens and you can see.
View 3 Replies View RelatedI am trying to do a perfect loony tunes opening theme background and failed so far.
20Enfant/cartoons_looney_tunes005.jpg[/img]
Getting that exact gradient type is the problem.
You can see that the FG and BG colors of the gradient is constant and the gradient is not 50/50% but more 30/70 (70% being the darker shade).
We recently built our new company website which we're happy enough with. However one element we tried to capture was an interactive donught shaped pie chart, using javascript to click on each seperate section.
The end result can be viewed at URL....
You'll notice imemdiately that the part that's a little off is the text which sits in each section. IS there an easier way to combine the graphic, text and javascript to achieve the effect we're looking for?
I've created an irregularly shaped mass (column corbel) within a project and would like to make it a concrete object. How do I do this?
View 1 Replies View RelatedI have two roofs that I am trying to join. It consists of two Gables. The eaves and type of cuts are the same, but it still says they can't be joined. Attached is an example of what is happening. The shown highlighted image is actually what I am trying to achieve.
View 4 Replies View RelatedHow do you add a soffit to a roof?
View 2 Replies View RelatedI have an existing roof with a new dormer.NEW dormer is created in a view with phase filter set to Show Existing+New Shouldn't the roof opening be shown as demo in the demo view??
When the opening is selected, the properties show the Phase Created=Existing and it is grayed out and not able to change to New Construction.
I'm using Revit Arch LT 2013. I do not need to know what Revit can and cannot do.
I am currently doing an MEP project and I am tidying up the model at present. I am having problems attaching the walls to the roofs. There could be a simple solution but I haven't found it yet !
I have tried attaching top base etc. but its not working. I only seem to be able to select one side of the roof when selecting where to attach the walls. I have attached 3d pics showing the walls that are extruding & also one of the walls that I am trying to attach.
I have included a picture of the roof I am working on. As you can see I have 2 different roofs set up here, which doesnt look very good. I was wondering if there is a way to create one roof with 2 different slopes like I have here? I would like it to start out at a 3/12 slope for the first 4 feet and then switch to a 6/12 for the rest of the roof. I have not been able to figure out how to get this to work.
View 2 Replies View RelatedI'm working on a blueprint and trying to get my roof to do something besides a straight slope, but it isn't going well. I need the roof to curve from the corners inward to the point, like the top of a Japanese pagoda.
View 1 Replies View RelatedI am trying to edit a roof assembly. My top layer is a roofing membrane. I give the roofing membrane a thickness and try to save and I get an error message saying that it needs to be 0" thickness. I set the thickness to 0" and I get an error message saying that it needs a thickness. How do I get pass this Catch 22?
View 5 Replies View RelatedI have this house Im trying to make on Revive and I can't get the roof to join together at all. I've had this problem for awhile now and I can't seem to get past it.
View 7 Replies View RelatedDetermine the roof pitch, then it has the typical triangle with 1/2 pitch and 1/4, 1/3, 1/6 and so on. I know rise over run like 5/12, but don't understand the fractions. How do I get 4/12 or 5/12 and so on from the fractions?
View 4 Replies View RelatedI've attached a couple images of a visibility problem I'm having. The ROOF image shows the underlay view I'm using in the NO ROOF view in my revit project. I modeled all four of the dormer roofs the same, in place roof components, and they show up in the roof plan, but not when I use the roof plan as an underlay for my framing plan.
They don't show up when I toggle on the hidden elements tool either. I checked to make sure I didn't have coarse scale visibility turned off as well as if I had not visible in plan unchecked. These things seem fine, plus, as you can see, it shows up in it's own view. View range seems to be fine too. I can't figure out why these elements don't show up.
I had downloaded R.A 2012 last year and activated it. This past November, i had issues with my tower and reset it back to factory. Now I downloaded R.A 2013 first and now i can not download 2012 even when i go to "My Downloads" and try to reinstall it through Autodesk.
I have a project that requires 3 buildings and i am having a hard time making a roof for the second building. Some reason, I get "unable to create roof" when i get to the second building.
I am trying to make a unique roof but I have had many failed attempts for hours now. Attached is a photo of the roof overhang I am trying to mimic and a crappy sketch showing the same thing. The roof has a normal gable on one end, but on the other. I need the over hand to go out three feet, then into a point at six feet at the same slope as the entire roof. NOT a hip roof which seems to be the only they I can make it. I even tried making a separate roof piece and it still didnt work.
View 1 Replies View Relatedhow i would go about inserting rooflights in this curved roof.
View 7 Replies View RelatedI am attempting to add fascia to a curved roof. The fascia is built as a wall type. The fascia follows the radius of the curved roof in plan view, but not in elevation view. How to get the fascia to follow the roof curve in elevation view?
View 1 Replies View RelatedI am stuck on how to put a gable end on a pitched roof.
View 1 Replies View Related