With 2 different types of curtainwall joining at the corner, we are unable to have the horizontal mullion mitered join with the vertical corner mullion.
Is there a way to cut of the redundant bit?
When working with mullions, there is a "Toggle mullion join" at the end of each mullion and you have to pick each one individually to toggle. Is there any way to pick a group of mullions and have them all toggle at once?
View 2 Replies View RelatedNeed to do a round upper left corner to join the horizontal flag with the vertical flag.
[URL]
How to create curtain wall with Mullion and insert in to project.
View 1 Replies View RelatedI just created a simple winodw family. I don't understand it looks fine in the reference level within the family.
But once I placed it in the project, it only shows the top mullion, I had to delete the top mullion within the family to make the plan view look right. What's the reason of it?
I'm trying to get a curtain wall style working, where I would have panels with a clean joint between them, of a controllable size. I'm also working with system curtain wall panels as I expect the CW style will need to work with variable profiles at the top.
My attempt so far has been to do a U-shape profile to get the panels to stop against, but this means the U is seen, particularly at the + junctions of the panels, which is not desirable. I could locally hide the mullions, but this is time consuming and I'd rather do it using a style-based method.
I've also tried doing a filter based on the CW Mullion name, and making it not visible, but this doesn't work for some reason.
I am trying to design the border mullion of the curtain wall, in a way that its centerline aligns to the border gridline.
For default the border mullion aligns the external face of it to the gridline, but I would like it to act as the internal mulluon - aligning with the centerline.
I'm having a bit of trouble using a curtain wall BIM model that I downloaded from a manufacturer's web site.
It seems like the vertical mullions are not centered on the grid lines; one side of the mullion is 1 3/16" from the grid line while the other is 1 13/16" away. If you look at the mullion in plan, you'll see the same issue. If you look at the profile rfa file, it appears that the centerline is properly located and locked, it's just in the project file where it's off.
If I select the mullion in the browser the right-click, Make Element Editable is grayed out.
If I select the mullion in the drawing area, un-pin it and then right-click, Edit Family is grayed out.
If i select the mullion in the drawing area then click Edit Type, the Type Properties dialog box shows the two parameters in the Dimensions group, "Width on side 2" and "Width on side 1", that are uneven by the same amount that the mullion is off of the grid line. I suspect that this the issue, but these are both grayed out and I can't locate their origin. If I duplicate the mullion, those parameters are still grayed out.I can save the profile, but not the mullion, which is showing the issue and contains the parameters that I want to change. How I can select and edit the mullion?
I have a curtain wall profile loaded into a project. When I change the panel in a CW to the profile that I loaded, the new panel is 5/8" short on both sides. As you can see in the attached image, on the left side of the plan view, the panel is 5/8" short of the cw grid line - there is no mullion there. On the right side, the panel is 5/8" short of where the mullion crosses the reference plane in the mullion .rfa file. The system panels on either side terminate correctly.
This isn't specific to any project; it works (or doesn't work) in any file. There are no horizontal mullions in the file shown. How to get the profile to extend properly?
I have a situation of one sloped floor connecting two horizontal floors. They build together a continuous surface.
I need to join them and have the layers be continuous along the structure. If they were roofs, no problem, I could use the "roof by extrusion" command.
Should I do that? If I try to use floors.....
When I model them as three separate floors, and then Join them, it doesn't work. meaning that the layers within the floor don't match (well, they can't, in fact! I have to move the floor behind!)
If I model one single floor and then add split lines, and move them... it does work. BUT..... I have a stairs on top of it! the stairs have a different slope than the floor, and i need to build a variable layer that fills the void between the floor and the stairs.
So my hypothesis was: I put a sloped floor through the slope arrow... and then adjust one variable layer to do the inflill...
My dream would be to join then floor and stairs.... The material is the same
Alright, I made a custom bookshelf to fit under my stairs, however, when I created them, I made them on a horizontal plane, so when I loaded into my project, my book shelf is laying down in the middle of the living room floor, which was fun at first, but nearly an hour later I am not so amused. Is there a way to flip it vertically or do I have to remake the whole bookshelf?
View 4 Replies View RelatedHow can i get horizontal mullions to cut through vertical instead or reverse?
View 2 Replies View RelatedCan I have use both the horizontal and vertical secton tail in the same project? When I change the tail in one system family it changes the tails on all the types.
View 1 Replies View RelatedI have a client who wants to see a more realistic representation of the direction of the planks in her floor. I cannot figure out ow to do this. I have succesfully changed the direction of the beam system under the floor, but cannot change the direction of the floor panel. I have tried the folllowing:
1) Going into sketch mode and changing the beam support direction.
2) Changing the pattern in the materials fsettings from horizontal to vertical.
I need to resolve the corner condition where two boards intersect. I am not able to create a void in order to cut the corner for the geometry. I would like to shape more than one side of the board and make it rounded. How do I edit the different sides of the geometry?
See attachment for Revit model:
Solution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
View 1 Replies View Relatedgetting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
View 1 Replies View Relatedi took a picture horizontally, is there any way to change so that it is vertical?
View 6 Replies View Relatedwhen I am trying to extract an element of an image from a larger image (using a layer mask) come across straight sections - but at an angle - at this point it would be nice to be able to put a "ruler" across that section and brush against it for a nice clean line. I tried creating a marquee and using the boundary box to position it - but when I rotate the marquee it wants to take that bit of the image with it...
View 2 Replies View RelatedIn CS6 when I crop, the crop would automatically be vertical on a vertical pic, and horizontal on a horizontal pic. The new CS7 (Photoshop CC) doesn't do that.
View 2 Replies View RelatedI have downloaded photos from an Iphone 4s to my desktop computer. The photos are horizontal and when I rotate them to vertical and try to save them I get the message " could not complete your request because of a program error". I have no problem doing this with photos from my Canon camera.
View 11 Replies View Relatedcurious if there's any way to keep guides vertical / horizontal when using the rotate view feature?
View 11 Replies View RelatedThe problem is that when I choose or designate an outline thickness, the horizontal is much thicker than the vertical. I need consistency. Especially noticeable if I modify a font, enlarge it, stretch or skew. I do set the outline to scale with image and also don't outline until I am finished with the modifications.
View 2 Replies View RelatedWorking on a photoshop image. Horizontal and vertical banding occurs in thin lines of solid colors randomly within the image.
They can be repainted out, but with any zoom or tool action more seem to appear.
They exist even after saving and restarting.
Windows XP 64 bit $GB Ram
Is there a way in actions or scrip to size a folder of different size horizontal and vertical images at the same time so that the longer edge ( h or V ) is equal - ie - horiz long side 2", shortside whatever on Horizontal - Vert long side 2", shortside whatever on vertical ? at present I am separating H & V and using two different actions .
View 1 Replies View Relatedcan make the photoshop tools pallet horizontal instead of vertical?
View 3 Replies View RelatedI would like to know how to draw this pipe as shown in this picture below. Draw a 3d pipe with horizontal curve and vertical curve elements combined. Here are the design elements
for the horizontal curve for the vertical curve
radius=30.798m radius=18.000m
angle=29deg angle=60deg
The diameter of pipe that i am trying to draw is 5 meters.
3d pipe.jpg
So I have been adding in some text over a .jpeg image. Then I am making them into a .dwg file. I have running into a lot of issues with the text though. In the .ai file the text is all horizontal. When I export it however the text turns vertical. I am looking at the file in Autodesk Truview 2014. Just wondering if this is a bug or there is some way to avoid this. I am also using Adobe CS2.
View 1 Replies View RelatedI find myself digging this option from the transform pane all the time, is there a way to assign a shortcut for this simple operation?
I can't get a hang of the Reflect-tool for some reason, it's quite clumsy.
in lightroom can i change the pic from horizontal to a vertical pic?
View 2 Replies View RelatedHow do I switch the text from vertical to horizontal
View 7 Replies View Related