Revit :: Printing Keynote Legend Directly From A View?
Dec 30, 2013
I have been trying to print a Keynote Legend directly to a network printer specifically because I wish to reference the legend whilst working at another PC to edit some specification notes which refer to the project I am working on. However, whilst the process (in Revit) seems straight forward "R"> Print> Print> Print Dialog>OK, having set the print properties etc, when I go to 'Print Range'> Selected Views/Sheets> Select> View/Sheet Set Dialog> <in-session> the two other Legends are listed but not the Keynote Legend! See below, whilst the 'Keynote Legend Can be clearly seen in the Project Browser and is the open view.
View 5 Replies
ADVERTISEMENT
Jun 12, 2012
I would like to add a Master Keynote Legend on a drawing that shows my entire keynote list regardless of whether or not it is used in the project. I have a keynote legend filtered per sheet but I also want another sheet that shows the full keynote list even if I haven't placed all of them in a view. Is this possible?
View 5 Replies
View Related
Nov 16, 2013
I have a custom block that includes a sheet keynote field. When trying to setup a keynote legend for those keys, they are 'filtered out'. Why?
How to get the legend to accept keynote fields that are not generated by the stock keynote tools?
View 1 Replies
View Related
Mar 8, 2011
I'm trying to make a Wall Types Legend using the Legend function in 2011. I did the first wall type just fine, placed it in section, tagged the material, etc. Now when I go to place another wall in a section view, it tells me the component is not visible in selected view. They are both new construction phase, stacked walls.
View 3 Replies
View Related
Dec 16, 2009
I'm trying to edit the keynote family with no luck. We are updating our standards and getting into using the keynote system in revit. I have added the correct keynote to most of our standard materials and its working great. I then opened the keynote family and changed the justification of the text to justify the way we do notes. I also changed the line style of the leader lines so it matches our other notes.
All went well. I get stuck when I try to change the gap between the leader tail and the text. I can't find anywhere to actually edit the line/arrow in the family that would let me change how that works. If you see my attached image the one on the top is our standard note and the other two are the keynote family.
How to set / change that gap?
View 3 Replies
View Related
Apr 14, 2008
Is it possible to have multiple leaders with one keynote?
View 6 Replies
View Related
Oct 26, 2011
I have a Revit model (A) being linked into another Revit Model (B). In model B I set the VG of the linked model A to By Linked View. Now, when I do this I see all my Element Keynotes, but non of my User Keynotes show.
Things tested:
Created models C and D to try in fresh environment - All Keynotes show up
Created model E and linked A into it - User Keynotes do not show up
Overwrote the Keynote Family in A and retested - User Keynotes do not show up
So this means there is some problem in Model A that it is not pushing the User Keynotes through when linked.
View 1 Replies
View Related
Nov 28, 2013
I have lost my Uniclass txt file for my Keynote. Uniclass (and Unicalss2) Excel or txt file?
View 1 Replies
View Related
Jul 27, 2011
First of all I have noticed that there are (2) keynote areas in my wall type object properties dialogue box and the only one that works when I go to tag it with a keynote is the number keynote. How do I get the text keynote to work within the wall type object properties? note I am trying out creating keynotes within objects rather than having them point to a text editor.
View 6 Replies
View Related
Jun 22, 2012
The help file says the keynote file should be located here- C:Documents and SettingsAll UsersApplication DataAutodesk<Revit release name><Imperial or Metric> Library Not happening. I'm in windows xp pro 64
View 3 Replies
View Related
Sep 13, 2012
How do I add additional columns and information to a keynote schedule?
View 2 Replies
View Related
Mar 14, 2012
How do you enlarge the legend key squares in a display theme style legend? Can you add schedule information to this legend like the total SF of a particular display theme style?
View 1 Replies
View Related
Nov 20, 2013
Can I rotate the symbol after I placed it on legend? It seems not work the way. Is it a way or I miss something?
View 3 Replies
View Related
Mar 12, 2012
Is there a way to create an 'Abbreviations Legend'?
View 2 Replies
View Related
Jan 17, 2012
Is there any way to tag a legend component? I'm trying to draw a "door types" drawing which shows the elevation of each type of door and I want to be able to place a title under each door that displays the door type mark. This is a very standard type of drawing that architects draw for almost every project and..after all...what could be more basic to a legend component then to be able to label it?
Now I use text to label each type of door...but if someone changes the door type mark and fails to update the legend also....I get a very un-Revit-like mis-coordination with my door schedule!
View 2 Replies
View Related
Jul 2, 2012
After a PURGE UNUSED it is impossible to create new LEGEND.
View 8 Replies
View Related
Aug 30, 2011
I've created an area plan of my existing building and coloured the areas using a Legend based on the area name.
I now want to do the same on the 'Proposed' Area plan, showing the new areas in the general plan ignoring the existing walls, but when I colour the areas the walls show through the solid colours, is there any way I can get the areas to cover up the walls on this plan - something line draw order.
I know you can select the area, and change the Colour Scheme Location to foreground or background - but the walls always show through...
View 1 Replies
View Related
Jul 10, 2008
I was able to bring in custom curtain wall panels as legend components-- however, when I set the host length, the height is automatically the same. Is there a way to insert a curtain wall panel into a legend that will have a rectangular shape (in my case, taller than it is wide)?
View 1 Replies
View Related
Nov 24, 2008
How can I edit the department names, once rooms have been assigned to them?
View 4 Replies
View Related
Jan 10, 2012
We have our first project in Revit that we are having to split among multiple sheets because of the size of the building, so I have made 3 dependent views from the main overall view, named them, cropped them and placed each part (A,B, and C) on separate sheets. Now that I am trying to do enlarged toilet plan views, I want to tag the plans with the plan callouts on the 1/8” sheets that are the dependent views, but all the view tags are referencing dependent view A since it is the first dependent view in the list. If I change sheet A to be named Sheet X for instance, all the view tags now reference sheet B since that becomes the first dependent view alphabetically. I want them to reference the sheet they appear in, but I can’t seem to figure out how to do that, even though they are in different dependent views completely and within the crop region, they all default to the first dependent view in alphabetical order.
View 4 Replies
View Related
Feb 18, 2011
I am a new user to this may seem simple. When I render a 3D view the roof disappears in the render view, but when I switch to show the model it is there.
View 6 Replies
View Related
Feb 9, 2014
I have a 3D view and when I turn on the clip boundary everything disappears, which leads me to believe that the clip boundary is off to the side somewhere. I zoom out & out, but can't find it.
Is there a way of resetting it? I could just make a new view, but I'd have to set the perspective again.
In this view I have hidden all the objects except for the one (a book case) that is being detailed. Every time I model something new it shows up in this view. Is there anyway of stopping new objects showing in a given view?
View 1 Replies
View Related
Sep 4, 2012
Why Camera Views is different from all other views in Revit. It is simple not possible to add a view reference, or a tag etc. to reference to a camera view.
Of course I can put in a 'dead' symbol to show where it is in plans, but that's simply not the same...
View 2 Replies
View Related
Jun 18, 2012
I am working with a seris of 3d views that I want o make bigger. How can I do this.
I want to keep the view the same but changed the "scale" of the view/perspective
View 2 Replies
View Related
Apr 29, 2013
I have a sheet with views on it. For some reason I can't select one of the views. I can't activate it. And the view title is gone. I can go to the browser and find it under the sheet and then go to open.
View 1 Replies
View Related
Jan 17, 2013
Having been on Revit for more than 8 years there's nothing more difficult to explain to a new user than how the View Range functions. It's one of the first features one must deal with with Revit and yet it can yield illogical results without proper use. The #1 youtube video on Revit's View Range is 20 MINUTES long! Here's my top reasons why View Range is illogical:
1. It does not behave like the "view range" of all other Revit view types. Sections, Elevations, 3d views are all based on a simple concept, a direction, and a 3 dimensional bounding box. With floor plans, elements can appear (or not appear) in a floor plan that is clearly cut so that they shouldn't if the user doesn't understand the rules (and there are lots).
2. It has "Additional View Range Rules" (or exceptions to logic), 7 in fact, which takes Revit Wiki over a page to describe. Each rule is complicated and very situational. No other Revit view types have exceptions. Why floor plans need to have special exceptions is absurd and political. These exceptions must also slow down regeration time of the model since it must process different groups of elements individually to determine their view state in the floor plan.
3. Modern architecture does not adhere to simple boxy shapes and user's need to trust that their view range is actually cutting the surface as they see it. No exceptions or special rules.
4. View Range has a Top and a Cutting Plane elevation. It is completely illogical for any element to appear above the cutting plane. This can easily lead to misinterpretation of 2d drawings because some elements may not appear in section even though they are above the cutting plane. Views should have a cutting plane, direction (up or down in this case) and a depth. Simple, just like all other Revit views.
5. The View Depth "range" is rarely used effectively. The only practical use is to show low roofs of buildings with higher roofs, or possibly foundation elements. Scope boxes or Underlays can accomplish this task much simpler. All the additional line-styles that accompany View Depths are just unnecessary and add more things for the user to manage. It's time to kill View Depth.
It's in Autodesk's best interest to make Revit a user-friendly application. This is one area that needs attention. Keep Revit easy to use without having to watch a 20 minute video.
View 4 Replies
View Related
Aug 9, 2013
My production team uses the Inventor View to view drawings once they are released from engineering. Sometimes they get printed so they can send a copy to our vendors. When ever they print from Inventor View 2014 the lines that are on the Visible Layer do not print. Also the lines in the titeblock are not very dark even though the "print all colors black" has been checked. It does not matter which printer or computer is used.
View 3 Replies
View Related
Apr 1, 2008
When I print in revit - at scale - 100% Zoom, I check it with an architecture scale and its off. For example, 25' - 0" in the revit file measured with a scale on paper is 23 ' 10". etc... Is it a revit issue, or a printer driver issue?
View 7 Replies
View Related
Jul 20, 2011
I have a problem with printing - problem to *.plt files I can’t use printing sets View/Sheet Set Revit creates empty files or loses parts of drawings I have Revit Architecture 2011 and 2012, Revit MEP 2011 and 2012 with every services pack All my PC Stations are (Dell Precision T3500 (6GB RAM) Windows 7 Ultimate 64 BIT) I tested 3 PC Stations and 3 types of printers (TDS400, HP DesignJet 1050, HP DesignJet T770 Printing size was A0 and A1. where is my mistake or what kind of limitations has Revit?
View 5 Replies
View Related
Dec 12, 2013
Is there an easy way to do a leader to a keynote symbol?
in other words, instead of text at a leader, I want to put a diamond shape with a number in it coresponding to a key note.
View 4 Replies
View Related
Dec 4, 2012
I've been playing around with the print options for a while here, and can't seem to figure this out. I want to print multiple view ports on one page.
View 7 Replies
View Related
