I want to make a walkthrough of the building I have created, and I was going to have the camera walking down the hall, with the camera aimed to the side so that you can see into each room as you pass it.
However, the doors are in the way. Is there a way to make the doors invisble in the walkthrough (or open them or something) so that it just looks like an arch-way.
I've created an irregularly shaped mass (column corbel) within a project and would like to make it a concrete object. How do I do this?
View 1 Replies View Relatedis there a way to make a drop shadow for an invisible object. because i want only the shadow of the pipe im drawing. when i set the opacity of the pipe to 0, the shadow turns invisible too.
i tried the dodge/burn tools, but they dont give me the same shadow as the other pipes in the image.
I want to use FumeFX to create an explosion coming out of a giant pipe. So I create the pipe in 3ds max and generate the explosion coming out of it. But now I want to export it into my movie, but I don't want the pipe geometry to be shown in the export, and if I make the pipe invisible, you can see the explosion at all times, even when its still inside the pipe. Is there a way to make it so your explosion can't be seen behind a hidden object? And will this also work for water in RealFlow?
View 4 Replies View RelatedAre the light rays made using outer glow around invisible lines? If not how can I make the white light rays like that in photoshop or illustrator?
View 5 Replies View RelatedGot some visual issues on the model space window in perspective view of the Objects/Models somehow gets tearing effects/ parts get invisible or gone missing, when playing around with it, whilst zooming, rotating, paning, moving while inside the perspective view window, this is not evident before in older 3ds max version we have used which is 2009, the model/object is correctly done, no open poly or anything with it or whatsoever....its just the viewing when you try to play around with the model that you see the tearing ups, this is quite frustrating coz you might think that the model is empty or missing its face or sides, or another part have gone thru the object....etc etc.
> 3.06ghz Intel Quad-Core i7-950
> Asus P6X58D
> 12GB DDR3 (2gbx6)
> Leadtek Quadro FX4000 2GB
> Seagate 1TB sata
> Windows 7 x64
> 3ds Max Design 2013
While modeling I always take ref planes for modeling and texture projection.But while modeling I am facing a problem.
Let me tell the backdrop first I am modeling a female face from 5 image planes for which I have assigned 5 separate cams.
Now 4 of them r working fine but on of the image is coming in the way of the fifth cam.
Now I can easily put the object in layer or isolate etc but turning them on or off is a real pain in a** while modeling.
Press/pull has been working fine up until now. When I try to press/pull a boundary, it creates an invisible extrusion rather than cutting into the object.
View 3 Replies View RelatedHow can I build something that looks like a rubber membrane stretched in a spot where an invisible object (say bowling ball) is sitting on the membrane? Hopefully that is enough of a description.
How to do this effect. Extrude does not give me the desired effect. Pretty much a beginner in Illustrator.
I have images of two different canoes, one is grey, the other is orange. I would like to make the orange one the exactly the same colour as the grey one.
How do I do this? First I tried selecting the orange one, then filling it with the colour of the grey one (Edit > Fill >Mode=Colour) - but of course this retains the dark tone of the orange.
I have two "banners" created from a plane with a cloth modifier on each. One banner is in front of the other. I want the one in front to drop first. After it drops and is waving around a little...setting down...I want the second banner to drop. Because they are close to each other and both waving a bit, they will hit each other.
How can I have both set to be a cloth object and both set to be collision objects to the other? I thought it was one or the other. (In the cloth object properties)
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
its about making 3d object from transparent picture , is it possible, for example i want to make 3d obejct from this picture URL>... so it has depht (thicknes) and everythinh .i used to apply texture on plane and cut out edges of plane so they match the picture.
View 3 Replies View Relatedim making a cnc milling machine and need to make some things to make. This is a clamp between the magazine and the barrle of a shotgun and i made the drawing in 2d to start whit and then used the EXTRUDE to make it inn to 3d.
As you can see on the top of the object there is no surface and the same goes for the buttom. How can i make a surface?
[URL]
Im using auto cad 2013 and how i would go about making a 3d object using specific x,y,z coordinates.
I used the line tool with the exact coordinates i require. all the lines connected but don't know how it turns into a 3d object.
Any way of converting a black object to a grey object? We have a product that is made of black plastic with metal surround and I desperately need an image of the same product with grey plastic, but keeping the detail and metal finish.
View 5 Replies View RelatedI have an object of given area and would like to make copies of the object at a different area. It is an irregular object so is not something readily calculated in Windows calculator, any macro that would do this in X5?
View 6 Replies View RelatedSo I have a student who wants to put these lines in the object. Since it would be very difficult to make these lines enclosed and looking right is there anyway to put these lines in the object. I don't understand why Emboss works on letters but not lines. That is all letters are.
View 9 Replies View RelatedI'm using DPro7 and am having trouble making a bitmap copy of an object, with a 3 colour linear fill, each time I get a serious error message box.It works OK with a 2 colour fill,
View 5 Replies View RelatedI want to make a controller that can change an object from green to red. So I wire the parameters from y position to the ambient colour.
I find to make the y_position into (y_position/100),(y_position/100),(y_position/100) but when I put this into the Parameter wiring dialogue I get a syntax error.
How its possible to make Wireframe with a 3d polyline object?is it Possible?
View 3 Replies View RelatedI have been trying to set up macros which stop lines from printing for our company title block, I have been using and following this website Making Lines Not Print (with Events) | Boost Your BIM - making Revit even better. It keeps coming up with errors and therefore I can't run it.
View 4 Replies View RelatedThe resolution of my monitor is set to the recommended resolution of 1920 x 1080. The default text size of 100% is too small. One of the preset options is to set the text at 125%. That works find in Revit Architecture 2012. BUT, I need the text to be a tad larger. If I set the text to 130% with a custom text size, something weird happens in Revit. The "status" bar at the bottom of the editing screen distorts the text. Some other weird things happen as well. Is text size in Revit hardwired?
View 1 Replies View RelatedI know how to use the transparency tool to make and object partially transparent but is there someway to make an entire object transparent so that what you put behind the object shows through? I am using the symbol of our logo and want to put pictures behind it so that they show though.
View 5 Replies View RelatedSo let's say I want to use a picture of a coca-cola bottle from an image I found on the internet, or I take a pic of one... what is the best way to cut-it-out?
1) For instance, sometimes, the object is cut out of a white background and I want to use it on a black background... leaves a nasty outline :( - maybe its easier to take a pic of the object on a black background (which is what I usually do - but I don't feel like getting the camera out - besides, I then almost always need to touch up the photo)
and
2) how do I easily smooth the edges if a use the colour wand? before or after cutting out (Copy to clipboard)?
In Inventor, it is possible to mark a workplane with "Export Object", by rightclicking on the node. This make the workplane accessible when using the part as derived.
What is the programmatic access to the property? Can not find it on the Workplane object?
Is there a way to make 3d view of an object ( say a box) from its plan and elevation? I'm requesting you to all to get a solution.
View 9 Replies View Relatedtrying to make an object the exact size of the artboard. This is something I do on a daily basis for several different reasons and it would be very useful if this can happen automatically for whatever size the artboard may be. As I understand it the only way is with a script but I have no experience with making illustrator scripts, im definately no programmer. I have set up quickkeys in the past to copy from the artboard inputs when you are on the artboard tool but these round to the nearest .01 and this is not accurate enough for what I am working with. Also if I do this with multiple pages open illustrator is very slow to respond to the artboard tool.
Below is a script that I saw on here that I believe may contain what I need but now knowing programming. Where to start on editing. All I need is the part where an object is placed on the artboard that is the exact same size as the artboard.
#target illustrator function main() { if (app.documents.length == 0) { alert('Open a document before running this script'); return; // Stop script here no doc open… } else { var docRef = app.activeDocument; with (docRef) { if (selection.length == 0)
[Code].....
How can I make the bottom of stair to flat instead of steps?
View 5 Replies View RelatedWhile making an In-Place Component, Revit fades everything else and makes it hard to see anything except for what you are working on. Is there a way to change this so that everything else isn't as faded.
View 2 Replies View Relatedim having trouble with a rotational object. I Basically made a basketball system in the category of specialty equipment. i made several different families in the same category and have nested one big family in specialty equipment.. I then loaded the nested family into a Generic face base template and change the caegory to specialty equipment, after completeing the steps i then loaded it into another family that is just specialty equipment. My problem is that, im either getting constraint problems when i set up my angular dimension parameter and try changing it's angle or when i do get it to change angles the pivot point keeps moving around...The main point is how do i get my pivot point to stay still and have my angle parameter change without errors?
View 1 Replies View RelatedI'm trying to create a model of a Golf club head. I need it to be hollow but I am unable to do this using the shell operation or by creating a surface and thickening the faces. I created the geometry by lofting a series of sketches. I think the nature of the geometry may be causing the problem.
View 1 Replies View Related