In Inventor, it is possible to mark a workplane with "Export Object", by rightclicking on the node. This make the workplane accessible when using the part as derived.
What is the programmatic access to the property? Can not find it on the Workplane object?
So I have a student who wants to put these lines in the object. Since it would be very difficult to make these lines enclosed and looking right is there anyway to put these lines in the object. I don't understand why Emboss works on letters but not lines. That is all letters are.
View 9 Replies View RelatedI want to put my iFeature on my workplane,but i can't.However, if I change my PlaneInput = oFace , it can work perfectly.My program is below:
Private WithEvents oInteraction As InteractionEvents
Private WithEvents oselect As SelectEvents
Private Sub UserForm_Initialize()
Set oInteraction = ThisApplication.CommandManager.CreateInteractionEvents
Set oselect = oInteraction.SelectEvents
[code]...
I'm trying to create a model of a Golf club head. I need it to be hollow but I am unable to do this using the shell operation or by creating a surface and thickening the faces. I created the geometry by lofting a series of sketches. I think the nature of the geometry may be causing the problem.
View 1 Replies View RelatedI want to use a lofted solid as a component in an assembly. I am using a top-down approach with 2D blocks to get the kinematics right before creating the components.
My problem is that the sketches needed to create the loft are on workplanes, and those workplanes are fixe with respect to an absolute coordinte system.
Is there a way to assosiate workplanes with a block instead, so that they will move with the part?
Is it possible that the problem is trying to do this in a part file, and that if I place the finished solid in an assembly it will then be able to move? ( I am fairly new to Inventor.)
I created a sketch on a 'fixed workplane' and extruded it. I would like to know if it is possible to move the workplane? I understand I can change the workplane if it is a 'plane by offset from plane'.
If moving a fixed workplane is possible, does the extruded features move along together?
Is it possible to change the colour of User Workplanes in IV 2011?
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
I am working on a project were I need to select a face and create a workplane out of such face, see the figure attach. my language of choice is C#.
Here is what I think it should be done, my proble is that the oWork (the workplane I just created remains null) and the whole project crashes.
private Inventor.Application mApp = null;.....if (((mApp.ActiveDocument != null))){
if ((mApp.ActiveDocument.DocumentType == DocumentTypeEnum.kPartDocumentObject)){
PartComponentDefinition oPartCom = mApp.ActiveDocument as PartComponentDefinition;
PartDocument oDoc = mApp.ActiveDocument as PartDocument;if ((oDoc.SelectSet[1]) is Face){
System.Windows.Forms.MessageBox.Show("You just selected a surface", "Surface Evaluator");Face oFace = oDoc.SelectSet[1] as Face;
WorkPlane oWorkpl = oFace as WorkPlane;
PlanarSketch oSketch = oDoc.ComponentDefinition.Sketches.Add(oWorkpl, false);
//WHAT AM I DOING WRONG?
}}}
I have some models which are based on skeleton modeling and where the actual parts are modeled at the position where they are in the assembly. When the skeleton part is changed the parts will update and their orientation related to the origin planes can change. This is where the problem lies, on the drawings of these parts the views are all skewed after an update.
Is it somehow possible to tell Inventor that all views on a a drawing should stay alligned to a workplane? Because it are all parts and no assemblies I cannot use posreps (and I don't want to use dummy assemblies). I also tried setting a specific edge to be horizontal with the rotate command in the drawing. This works for the base view, but all projected views will still be skewed after an update.
I have assembly file in which I have created a work plane "Work Plane19" . Now I wanted to create a new work plane which will be paralle to workplane "WorkPlane19" & offset by 10.5 mm in same assembly document through VBA subroutine. I have tried with following code but getting error,
Public Sub NewWorkPlaneCreate()
Dim oAssly As AssemblyDocument
Set oAssly = ThisApplication.ActiveDocument
[Code].....
How can I create a workplane with the API that is tangent to a surface and passes thru a workpoint. It is easy to create a work plane of type kPointAndTangentWorkPlaneDefObject by point and click in Inventor 11, but I can't figure out how to do it in the API.
View 5 Replies View RelatedI have a ipt file in my assembly and try to makes some constraints. Everything ios working well, but there are some suppressed workplanes, and I don't want to use them for a automatically created constraint. Is there a way to find out the workplane suppress status?
Why are they suppressed? They are defined on a part feature (extrusion surface). And when I supress that feature, also the Workplane is suppressed.
But I only can get the visible status. Maybe there's a way to get it about the part feature, but therefore, I have to search for the part feature, and that's also a problem. I cannot get the part feature, who is used for the workplane definition (I think, it's a problem of my knowledge )
Please see attached a small view on the browser where you can see the suppressed Planes.
I am trying to create a workplane by a point and a line. I can do this maually, but have not been able to reproduce this in code.
BTW: I realize I can create a fixed workplane by using the point, the edge, and an edge perpendicular to the edge, but I cannot have this as a fixed workplane.
I am making a C# Add-in, I need to create a plane from a selected face, I am using the following code, but I am getting stuck.
if (((mApp.ActiveDocument != null)))
{
if ((mApp.ActiveDocument.DocumentType == DocumentTypeEnum.kPartDocumentObject))
{
PartComponentDefinition oPartCom = mApp.ActiveDocument as PartComponentDefinition;
PartDocument oDoc = mApp.ActiveDocument as PartDocument;
[code].......
I have three workplanes. All three were created the same way (offsetting an existing workplane). I want to change the offset dimension. I can on one of the planes, but on the other two, I have to "Redefine Feature". There is no Edit dimension available in the menu.
One plane like this:
Two planes like this:
Why is it different?
How do you create a new Workplane from a Defualt Plane and rotate it along a default Axis?I am new to API and trying to create workplanes and rotate them along a Axis.
Im trying to use "AddByPlaneAndOffset" is this the right method?
If i made a workplane include in a drawing document with api, then it will display in the view as a center line.
I want add some note to the Center line,but i didn't know how to select it with api, Is there have the API function to do this work?
Is there anyway to completely hide a workplane that is contained within a clientfeature?
The attached part shows this when you hover over the client feature in the browser. I have the visibility of the plane turned off but it still shows up when the clientfeature is pre-selected.
What is the best way to create a workplane at a given angle on the surface of the tube. Imagine the workplane long and thin running along the surface of the tube. The angle will be a parameter (from a sketch or user).
I'd like the workplane to always be on the surface of the tube, even when the diameter of the tube (from a dimension in a sketch) changes.I'm thinking that a (angled) line in the same sketch as the two circles (which define the tube diameter and thickness) would be a good starting point.
In an assembly document, I try to add a MateConstraint between male and female side of an 45 degrees elbow. The male side is built on the XZ Plane and Y Axis And I try to create a workplane on the female face.
But a got an error with the last line of code. Here's my code (vb.net code) :
' Get application object
Dim app As Inventor.Application = GetObject(, "Inventor.Application")
Dim doc As Inventor.AssemblyDocument = app.ActiveDocument
[Code] .......
I have to create a hole (extrude) in a wall part in my assembly document where a stack will be installed.
To determine where, I verify if a line segment pass through the wall (XY Plane).
But I get an error with the command: IntersectWithLine
Here's my
Public Function IntersectionPoint(ByVal app As Inventor.Application,
ByVal wp As Inventor.WorkPlane) As Inventor.Point
Dim oTransGeom As Inventor.TransientGeometry = app.TransientGeometry
Dim startPoint As Inventor.Point = oTransGeom.CreatePoint(Me.StartVertex.X,
[Code] ......
I want to be able to have All Work Planes set as 'Invisible' but create a Message.box or Icon that allows me to change the Visibility of any individual workplane(s) physically selected in the browser.
A rule written by another member should do the trick if the following line could be altered so as not to read 'For Each' oWorkPlane but instead for 'Each Selected' oWorkplane.
'For Each oWorkPlane In docFile.ComponentDefinition.WorkPlanes'
'get user input
oInput = InputRadioBox("Select workplane visibility:", _
"Turn ON workplanes for all components", "Turn OFF workplanes for all components", "False", "iLogic")
'Define the open document (top level assembly)
Dim openDoc As Document
openDoc = ThisDoc.Document
[code]....
There are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
im making a cnc milling machine and need to make some things to make. This is a clamp between the magazine and the barrle of a shotgun and i made the drawing in 2d to start whit and then used the EXTRUDE to make it inn to 3d.
As you can see on the top of the object there is no surface and the same goes for the buttom. How can i make a surface?
[URL]
Im using auto cad 2013 and how i would go about making a 3d object using specific x,y,z coordinates.
I used the line tool with the exact coordinates i require. all the lines connected but don't know how it turns into a 3d object.
How its possible to make Wireframe with a 3d polyline object?is it Possible?
View 3 Replies View RelatedIs there a way to make 3d view of an object ( say a box) from its plan and elevation? I'm requesting you to all to get a solution.
View 9 Replies View RelatedDo you need to use the join command on an object before making it into a dynamic block? I have these stairs I need to scale down to fit my floorplan, but when I place grips on it in order to scale them down, I can only scale of the block while the rest becomes totally distorted.
View 3 Replies View RelatedI have images of two different canoes, one is grey, the other is orange. I would like to make the orange one the exactly the same colour as the grey one.
How do I do this? First I tried selecting the orange one, then filling it with the colour of the grey one (Edit > Fill >Mode=Colour) - but of course this retains the dark tone of the orange.
I have two "banners" created from a plane with a cloth modifier on each. One banner is in front of the other. I want the one in front to drop first. After it drops and is waving around a little...setting down...I want the second banner to drop. Because they are close to each other and both waving a bit, they will hit each other.
How can I have both set to be a cloth object and both set to be collision objects to the other? I thought it was one or the other. (In the cloth object properties)
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
its about making 3d object from transparent picture , is it possible, for example i want to make 3d obejct from this picture URL>... so it has depht (thicknes) and everythinh .i used to apply texture on plane and cut out edges of plane so they match the picture.
View 3 Replies View Related