Revit :: Fat Colored Outlines After Turning Off Visibility?
Dec 20, 2011
I need to create some exterior snapshots of our model, which has just been completed to the 100% DD phase. The model has another Revit model linked in: the structural elements from our structural engineer. In the exterior shots, his pilings are showing and we don't want to see them in these images, so in the views I created I turn off his Structural Columns (which is the category for his pilings) in Visibility/Graphics Overrides. The pilings go away, but all of his elements now show with a fat colored line surrounding them.
Two questions: why are these lines showing when all I have done is turn off a model category in Visibility/Graphics Overrides? And how can I now turn off these fat lines? They do show when I create a PDF of the image.
View 4 Replies
ADVERTISEMENT
Mar 19, 2012
I use INV2012. It was very easy in the older version of INV to switch off all unwanted items in drafting. But, now we have to work with design view rep. Currently, I am working on a drawing which has surfaces. Though I saved the view rep without those surfaces, still I am getting it in drafting. I have unchecked assosiative in drawing view rep still no use.
View 1 Replies
View Related
Oct 1, 2012
In drawings there are a lot of times where I turn off the visibility of certain line segments to make the view look cleaner.
What if I was to reverse the visibility of these lines segments down the road?
View 5 Replies
View Related
Apr 24, 2012
We need a macro that will allow you to select a certain color fill inside document and change all to no fill hairlines. It needs to be capable of doing it several times within the same document. Does anything like this exist out there?
We have color replacer. We want it to do this automactically with a static group of colors everytime without any manual maniplulation required.
View 3 Replies
View Related
Oct 16, 2012
I'm playing with the 3D tools in Photoshop CS5 Extended for a friend. He provided an .obj file of a tool part and it opens just fine as a complex, shaded object.
Question: Is there a way to generate simple outlines of the object and export those outlines as paths to Illustrator?
View 6 Replies
View Related
Jun 25, 2012
I had a few exterior elevations (actual design elevations not 3d) of a building that looked great and had nice shadows and materials and everything was wonderful until today when I turned off a couple section marks and a level mark and then the back turned black and the dialog box in Graphic Display Options does not show the background section anymore?Now I can't even get rid of the black background!!
View 2 Replies
View Related
Mar 9, 2012
Is there a way to set the visibility of elements in a 3D view according to the Level they are associated with?
The VG tab which opens the filter dialog provides a check box for the "Levels" category, and the relevant parameters are made available.
But I can not seem to create a filter rule which evaluates any of those parameters (name, elevation, etc...) to then isolate the visibility of those elements in the 3D view that either meet, or do not meet the criteria. Nothing seems to work.
To achieve a "similar" effect in a 3D view, I can use a Section Box, but that is a very clunky and imprecise way.I can also create a Shared Parameter for "Level" and perhaps filter successfully that way, but that seems redundant with the Levels intelligence already established.
View 7 Replies
View Related
Jun 5, 2012
I'm using BIMLink to adjust parameters in a model... If a dimension ends up being zero, is there a way for me to have conditional formatting to turn off visibility of a dimension with a zero value?
View 7 Replies
View Related
Jul 18, 2011
I've attached a couple images of a visibility problem I'm having. The ROOF image shows the underlay view I'm using in the NO ROOF view in my revit project. I modeled all four of the dormer roofs the same, in place roof components, and they show up in the roof plan, but not when I use the roof plan as an underlay for my framing plan.
They don't show up when I toggle on the hidden elements tool either. I checked to make sure I didn't have coarse scale visibility turned off as well as if I had not visible in plan unchecked. These things seem fine, plus, as you can see, it shows up in it's own view. View range seems to be fine too. I can't figure out why these elements don't show up.
View 4 Replies
View Related
Dec 13, 2012
I know I must just be missing this somewhere, but I would like to shut off the geometry inside a family that's associated with a specific parameter. This is while I'm editing the family.
Specifically, the family I'm creating is for an appliance that has the option of an arched, or rectangular opening. Once I associate the geometry for the arched opening with a parameter, I'd like to shut that off, so that I can create the rectangular opening. Similar to how the family behaves once it's brought into a project.
Right now, I'm just kind of using the temporary hide functionality to shut them off, but if I turn them on, then have to go back to make edits, I have to select the individual geometry all over again to hide it. I've also noticed that some geometry, even when hidden, can still be selected.
View 8 Replies
View Related
Apr 8, 2013
In my 3D View my walls disappear when I de-select the structural box. Although drawn as regular walls they are store front panels so carry no load other than their own weight. My Visibility Graphics dialog box seems to have limited options for this. Am I missing something? How do I get them to re-appear in my 3D View for rendering without switching them to a structural wall?
View 2 Replies
View Related
Nov 12, 2013
I'm facing a problem dealing with visibility formulas... My situation that im dealing with is, I have 2 yes/no visibility parameters, one that is called Right side clearance and another one named Left side clearance. I want to create another yes/no visibility parameter that's called Clearance. I want to link the Right and Left clearance parameter to the Clearance parameter where if it is off, then there will be nothing that shows.. But if I want it on then I would have to select either right or left without them both showing up?
View 4 Replies
View Related
May 7, 2013
I created a building section and all grid lines appear. I selected all grids that I want to appear in the building section, switched to 2D, and adjusted as desired. From that building section I created a callout for a stair section detail. In the callout view, some grid lines appear but not all grid lines appear. I turned off crop view but they still do not appear.
View 1 Replies
View Related
Jul 15, 2011
If i draw a beam in plan view en define the height, the beam disepare. Is there a posibility that the beam is in place and you can see a dash dot line and two dashed lines in plan view?
View 1 Replies
View Related
May 20, 2013
In Revit LT 2014, I've tried unsuccessfully to override the color of topographic surface edges in my model to white, so the edges don't show up in plan views. I've tried through the Object Styles menu, Override Graphics In View By Element, and Override Objects In View By Category, but nothing has worked. These overrides have worked for me in the past in previous Revit Arch versions, so I don't know if LT just doesn't have that capability, or it's a bug.
I can't simply extend the topo surface past the view window edges (I only want to show contour lines on my site, since they've been surveyed, but the neighboring site has not been surveyed, so I don't want to guess at them). I really just want to hide the toposuface boundary edge.
View 1 Replies
View Related
Mar 18, 2013
I am trying to tag doors in a drawing. What I want to see is the door size, so I turn on 'width' parameter, and turn visibility off on the border of the text. Change the size of the text to match, easy enough. Now I want to place the text along the open door in the floor plan view, but the tag always jumps to the center of the door frame. Can this be modified to do as I want? is there an alignment parameter I can alter? Perhaps tagging the door family and aligning it in the family editor? Does Revit is capable of doing this. Until then, I have to place the text for each individual door.
View 2 Replies
View Related
Mar 4, 2012
I find the visibility parameter a very useful option when building families. Unfortunately it doesn't work when exporting IFC. The elements set to not visible are visible in the IFC exports.
I also experienced IFC export issues with the use of phases.An element created at phase 1 and set to demolished at phase 2, will not be visible in the IFC export of phase 1.
The IFC Exporter for Revit 2012 v1.0.4.msi was used when running into these issues.How to be able to have correct IFC exports using the visibility parameter ?
View 4 Replies
View Related
Jul 26, 2011
We have multiple linked Revit files from consultants in the same hospital Revit model. How can we turn off all grids and levels in all of the linked files globally. We want to avoid having to do it individually for each view & each linked file.
This project is currently in Revit 2011. If not 2011 is it possible in 2012?
View 4 Replies
View Related
Aug 13, 2012
I've created a family for an exterior canopy system that has many variations (see attachment). It works for all options except the final request from the intended users. When the canopy is very short, the interior outriggers do not need cable tiebacks to the exterior wall.
Currently, the outrigger family, which is nested and arrayed in the host family, is composed of multiple objects, four of which comprise the cable support that needs to be able to be turned off, and one that is the outrigger that is always visible. I've tried several ways of getting the cable assembly to turn off while leaving the outrigger visible, but all without success. I've tried editing the array and mapping the cable assembly components' visibility parameter to a Cable Option Yes/No parameter. I've tried making the cable assembly its own family and nesting that first in the outrigger family and then mapping its arrayed instance to a Cable Option parameter. I've tried various combinations of Instance versus type parameters in both the Outrigger and host Canopy families, all to no avail.
Given the way the family is now designed, can this be done or must the cable assembly be its own family and arrayed separately? Note that there are parameters to control the cable assembly size.
View 7 Replies
View Related
May 23, 2013
I am trying to do the travel distance plan for fire cert saftey plan (Ireland). I have 6 levels of plan. When I place a component of "travel distance" family symbol (that I created) on the top floor plan, it is showing on the ground floor plan but not inbetween (TG).
See attach.
View 3 Replies
View Related
Jan 15, 2013
I'm trying to make a project-file for a table that I've made as a family. In the project file I want to dimension the table, as a whole and as the differents parts of the table.
I've made visibility parameters in the family, but my problem is that that will hide that part of the table, i.e. the legs, in all views. I want to have one section with only the table top, one section with only the legs etc.
how I would go about this without copying the table in the project file and hiding different parts in each of them?
View 2 Replies
View Related
Jun 27, 2012
How to create a 'No/Yes' or visibility parameter for a title block? I have my Architectural Seal as an image inserted into my title block family. I want to have that as a parameter for visibility so I can have it turned off until I am ready to print for final building department submission filing.
If possible, this would be a global adjustment so I would operate this parameter once and will affect all the sheets in the project instead of having two title block families and swapping those out at the time of filing.
View 3 Replies
View Related
Jun 12, 2013
I am trying to figure out why the light fixtures are giving me these thick heavy black lines. The same fixtures in the arch floor plan are close to what I want (see arch1). However in mech1.jpg there isnt a way I can find to make the lights more like arch1.jpg. I dont want to use an architectural view template on a mechanical plan, which seems to be my only temporary solution. This is not an issue of Thin Lines (TL) setting and I have tried object styles and VG, although I must not be looking in the right area. How I can control this?
View 1 Replies
View Related
Jun 14, 2012
When I try to create a filter, I cannot get the Filter Rule to work. Under Filter by there is an option to select More Parameters which then directs you to Project parameters. When I select a parameter, it does not show up in the 'Filter by' box so I can create the rule. I have used this feature in 2011, but I cannot seem to make it work in 2012.
View 1 Replies
View Related
Nov 20, 2013
I have created a 'Title Block' family which I am wanting to use as a 'drawing stamp', being used to mark an existing drawing sheet carried forward to another phase of the project as being from the previous phase. To do this I have created a filled region with an opaque white background and a grey border (gray) to form the extent of the 'stamp'. I have then created a number of labels for the relevant information and added some lines as borders to the labels.
The problem comes when it is used on a project sheet since the label border lines do not appear. Since the commands to 'send to the back' or 'bring to the front' are absent when editing a title block I wonder why this is? Logic suggests that the only workaround is to create a number of filled regions, in jigsaw style, one for each label and to use their borders as the label borders. However, this seems an enormously long winded an probably kilobyte hungry way of achieving something that should possibly be very simple. I have to say that it may also have an easy solution that I may have used before but forgotten.
View 2 Replies
View Related
Dec 4, 2012
I'm having problems seeing the walls I drew at the foundation level in this project. The walls should be shown but I can't get to see them except in a 3d view. Also, when i intended to draw them, I think I should have done it from the foundation level plan but I could not set the plan view to see the above objects in order to draw from them. I drew it from another level and then I modified their base and top constraints afterwards..
I tried to modify the view range of the foundation level without success.
View 6 Replies
View Related
Aug 8, 2013
I am doing a five stories building and when ad the structural column with concrete cast in place material, the representation in plan view does not cover the block hatch of the wall. See attached image. I have read all about structural columns and did not find any solution.
View 5 Replies
View Related
May 8, 2013
How do I "get outlines" in Illustrator CS6. Option was available in version 4, but now is gone. Have tried copying an InDesign-created outline but it will not copy.
View 1 Replies
View Related
Nov 11, 2002
i have created a Stargate using photoshop but because its round and i have used a transparent backgrond when i insert the picture into my web page i get a white pixelated edge to the graphic.
View 3 Replies
View Related
Jun 3, 2011
How do I type text in the color of my choice?
Win XP Paintnet version 3.5.8.
View 3 Replies
View Related
Mar 29, 2011
How do I snap (objects or, especially, guidelines) to the outer edge of an outline? The guideline always snaps to the edge of the object, if the outline is behind, or within the outline if it's in front of the object.
I usually employ workarounds such as converting the outline to an object but that's not always convenient.
View 2 Replies
View Related
