Is it possible to do so? If not, how can I break the file apart so that I can work on the 2d detailing within the Revit file while the other guy is working on the other part of the file.
View 1 Replieshow other people approach Revit (the joys of working as the solo Revit pioneer in the practice)I am in the middle of putting together various families - and have been experimenting with symbol lines for the detailing at reveals / heads etc.
For the moment I had simply used masked regions to create the joinery of frames, beads, architraves etc. which works fine, apart from not being able to use any fills at family level - leaving it to call-out drafting to add the detail in the project.
I tried the alternate of using Detail Components within the family (a simple rectangular joinery section) with shared parameters so that it can be driven by the host family - which allows drafting fills to be used.
It looks better and will save time placing fills later on to call-out details.
But - is there any impact on performance in doing this (every section now shows the fill when set at 'Fine') - is this a standard approach, or am I better leaving the symbol linework as hatch-free in the family itself - and leaving it all for addition in individual call-outs ?
I created a wall detail in a scale of 3/4"=1' and when I change the scale to 3"=1' the hatching becomes smaller. I want the hatching to get larger without having to redraw it.
View 1 Replies View RelatedI would like to insert a cooktop that I have as a component family. I see in the architect tab, window, door, etc. but no component.
View 1 Replies View RelatedI'm having trouble inserting a bath in particular from the components tab. I go to components and I only have 3 items in the drop down list; termination board, construction trailer and metal support. How can I add a bath to the components list? The bath doesn’t work for all those families. I’ve added a bath to my project browser screen and dragged it in from there but I would like it to be in the components drop down lists. How do I do this? I’m using revit 2013. may be a very simple solution but it has had me stuck for some time
View 1 Replies View RelatedIs it possible to make the graphic represention of a component in a schedule (make a legend component representation a parameter) or use legends dynamically. I would like to schedule all the casework with quantities of each component. But the current schedule has a graphic representation next to the quantities but it is not in revit and the quanties are determined manually by counting them. I know there is a add on you can purchase to create dynamic legends but is there a way to do this directly in Revit?
View 1 Replies View RelatedIs there any way to tag a legend component? I'm trying to draw a "door types" drawing which shows the elevation of each type of door and I want to be able to place a title under each door that displays the door type mark. This is a very standard type of drawing that architects draw for almost every project and..after all...what could be more basic to a legend component then to be able to label it?
Now I use text to label each type of door...but if someone changes the door type mark and fails to update the legend also....I get a very un-Revit-like mis-coordination with my door schedule!
I have two drawings: one with lines, and one which includes maps (raster image) and point cloud of latitudes of the same area (elevation in meters). I'm trying to copy these lines from the other drawing into the map-drawing, but when I'm trying drag and drop, the mouse doesn't even go to the other drawing. I also made a block of the lines and tried to insert it, but it doesn't work either.
View 5 Replies View RelatedI am making a detail library for the company. When I make my own detail components my element keynote doesn't staywith the component even though I have done new entries to the keynote text and updating everything with the new path gone into the materials and assigned the keynote and the main library file uses the new path to the keynotes. Yet everytime I bring in something new that I have created. I have to resassign the keynote. But if I bring in one of revits detail components, the keynote is right there.
View 1 Replies View RelatedHow do I prevent the components beyond the non-transparent walls and roof from showing through. I have double and triple checked the the transparency setting for the walls and roof in 'Override Graphics in View' and they are both set at '0'. Note these specifics:
Walls: Only the window glass shows through.Concrete Roof: Everything shows through as if transparency is set at 50%.
I have a floor joist/subfloor/finish floor system where the joists are hung from the sill inside the foundation wall, this means that the joists stop at the wall but the subfloor will continue over the sill plate and the finish floor will stop at the inside edge of the bottom wall plate. As near as I can figure, in order to get this to show correctly in section I really need to create the complete floor assembly by stacking 3 separate floor sub-assemblies (framing, sub-floor, finish floor) is this correct? (this is the method I'm currently using) Is there a way to manipulate the sub-components in section that I haven't found?
View 2 Replies View RelatedI want to export from Revit 2013 to AutoCAD so that each component of a wall assembly exports to a separate AutoCAD layer. For example on a simple stud wall with drywall on both sides I would like the interior lines on different layers than the lines for the outside faces. Is this possible?
View 2 Replies View RelatedIs it possible by importing a drafting view or copying 2D details, to not duplicate the detail components families ? I tried many ways, but I always get my families duplicated.
Copying 'Gypsum' will always duplicate with 'Gypsum1', even if they are exacly the same original family.
I'm getting an error message that I don’t fully understand when using an adaptive component. "There is only one component in this repeater" I am trying to create a undulating ceiling and attach an adaptive "Rafter" to follow the form. I can occasionally get it to work but on occasion I receive the error message. I can send you the file if you like, I’m pretty sure it’s a “User Issue”!RAC 2013
I have been told that it is to do with the direction that I draw the curves but I would like a more indepth explanation of this error...
The other issue I'm having may have to do with the placement of the adaptive component on the node plane, depending on where I place the component it will change the orientation if the rafter...
I am trying to put a URL link to a file in a components instance parameter, to show up in the properties palette, I can put the URL in there, but no link is established. How would I get this to link to the file?
View 1 Replies View RelatedI am trying to create an Island family with cabinet components nested into the island family. I have included both a 3D view of what I want the island to look like and a floor plan of what I have right now. I want to be able to adjust the size of each of these cabinets with a parameter. But I am not sure how to get them to stay lined up like they are right now.
If I change the size to a larger size the center cabinet overlaps the cabinet on the right. but if I add another reference plane to the right side of the center cabinet, when I try to adjust the size I get an error message saying "Constraints are not satisfied".
I am having difficulty placing components in my Revit Architecture 2012 model. They are wall hosted (outlets) & floor hosted (floor boxes) components. I have taken the MEP, Base Building, Interiors, and Structural models and linked them into my new file. I have linked them in as overlay. Should I have changed the reference type to attachment?
When I go to place my components I recieve the following notifications from Revit and am unable to click any walls or floors: "Click on Wall to place Instance" (outlets) "Click on Floor to place Instance" (floor boxes). How do I set up these linked files so I can place my families?
I've created a family that represents a poke-through with nested, shared families for different components. Everything visible in plan is made with Symbolic lines instead of Generic Annotations. The reasons being too numerous to explain here.
The problem I'm running into is that the family looks fine when the View Discipline is set to Architectural but when set to Electrical (1/8" scale in both) part of the shared components begin to get masked. I cannot figure out why they are behaving this way, except that some of the lines are creating some sort of masking area in the Electrical discipline. When the nested families are not shared the component looks fine in both disciplines. I've attached images and the family for you to try.
The Cut Plane in a Plan View doesn't really represent the cut component but instead some kind of projection.In my case, I use a lot of Face Based Windows and Doors since my walls are often slanted. The Plan View representation of these components doesn't look right. A workaround is placing these components in a Component/Model in Place environment.
View 3 Replies View RelatedIs it possible to copy a phase from one level to the other. For example, on Level 1 I have walls that are Existing, Demo, and New Construction.
If I select the objects and copy to clipboard and paste the objects to another level they will all switch to New Construction. Is there any way we can have the walls remain the same phase when copied to another level?
When I copy, I only get an outline of what im copying in blue lines.
I must have played in the settings somewhere.. how to put them back?
im currently using Autocad 2013 and it is running painfully slow when drawing lines and copying lines and objects... my experience on autocad is very minimal and how to speed things up a bit. also icons appear next to lines when i join 2 or more line, one for each join, but i suspect they may also be causing my drawing to lag.
View 4 Replies View RelatedI modeled an apartment building with 4 floors, etc, and I'd like to make an exact copy of this building twice, because this area has three identical apartment buildings side by side. How can I do this properly?
View 6 Replies View RelatedHow do I convert Detail Lines to non-plotting Reference Lines or Reference Planes? (or to a reference line that would not plot in the future?).
View 2 Replies View RelatedAny way to convert area boundary lines to room separation lines?
View 1 Replies View RelatedWe commonly weld two half cone sections together to make a complete cone. To show the weld prep i have modeled a chamfer on the cone edges.
When i try and show the chamfer on the drawing using a section I cannot dimension the angle as the surface is viewed as a curve by Inventor.
I have attached a drawing and part file showing the problem and showing the detail I would like (I've shown the detail using a simple sketch).
i have aprblem with the main icons of the ribbon, i install the program and it works correctly Suddenly the user interface converts to the normal autocad i tried to restore the ACAD.CUIX and doesn't work.
i have Win8, the version i have of the program is 2014 and the problem also happen on autocad architecture.
I come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.
Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework. This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.
When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.
;note how the left and right views are different and how some of the frame members are elongated on the lh view.
I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
Beyond lines displaying for walls of floor below and cannot get rid of - view range is set with bottom offset at floor level, cannot override beyond line style and nothing else I can find to turn them off. Its walls, door openings (not symbolic lines etc.
View 4 Replies View RelatedIs it possible to import a 3D DWG (lines) to be used as a path for a sweep? I'm assuming (because I've found that it appears not to possible) that model lines must be assigned to a workplane and that "floating" 3D lines from a DWG aren't assigned workplanes and therefore can't be converted into Revit Model Lines.
View 9 Replies View RelatedI have a small residential project with corner lot sloping up diagonally from the intersection. The client wants to raise 'usable' surface of the site by introducing terracing - 3 retaining walls 3' high and 3' apart.
All is interrupted by a driveway and series of steps leading to the main level. I'm trying to modify existing surface, but the topo seems to have 'life of it's own' . I've tried to Split some surfaces to make life easier. That worked to some extent. How to make the topography cooperate? Is there a way to 'turn off' triangulation? ( not the visibility ) . I'm certain the contours I'm creating can be built, but Revit is 'changing' them to something else. Some points that I place are simply ignored.