How do I prevent the components beyond the non-transparent walls and roof from showing through. I have double and triple checked the the transparency setting for the walls and roof in 'Override Graphics in View' and they are both set at '0'. Note these specifics:
Walls: Only the window glass shows through.Concrete Roof: Everything shows through as if transparency is set at 50%.
I want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies View RelatedIs there a way to prevent edits to transparent layers? I have a very frequent problem where I change visibility on a layer but neglect to change the active layer and end up making unwanted edits that I can't even see the results of. Sometimes this means I don't manage to undo these changes while I still can!
There is never a case where I want to make changes to a layer I can't see (making changes without knowing what they are is the opposite of useful). Is there an option somewhere to prevent this?
Also, is there a way to set visibility and set the active layer in a single click or keystroke? Part of the problem is having to always remember to do two things.
Is there an option to set no active layer I make the active layer invisible?
I am using PSP X4.
I am working with transparent images. An example is the image below. I've added borders so you can see what I'm doing.
As you can see, the background is solid white, but the image itself is primarily white. I want only the background to be transparent.
I've dabbled with the GIF Optimizer feature to make the background transparent, but part of the actual image becomes transparent also, since it contains white.
One thing I tried doing was use the color replacer to change the white background to another color, but in doing so, some of the image itself changes to yellow, despite my trying to avoid that.
Is it possible to configure PSP so that only the background is transparent? If so, what's the most practical method?
I am having an issue with the visibility of components underneath other, transparent components. The part which needs to be visible is a switch underneath a vacuum formed polycarbonate cover. When the cover is positioned open such that the switch would be partly visible even if the cover is opaque, the switch is rendered. When the cover is positioned closed, the switch is no longer rendered. I have attached JPG's of the two states.
I am on INV PDSU 2012 64 bit.
I'm at my wits end trying to cut a wall with a void. I want to chamfer the corners of a wall, but I can't get even a basic void to cut from a wall. I get the error : "This Mass has no solid geometry for its Void Forms to cut. They must be deleted, or solid geometry added and cut." They clearly intersect, what am I doing wrong?
View 2 Replies View RelatedHow do you tag the rooms that are not fully enclosed by the walls?
View 1 Replies View RelatedWhy Revit 2013 when the walls are installed on some laptops is clearly visible.
View 1 Replies View RelatedThere are certain walls I just can't fillet, what's the reason of it? See attached pict.
View 1 Replies View RelatedI would like to insert a cooktop that I have as a component family. I see in the architect tab, window, door, etc. but no component.
View 1 Replies View RelatedIs there a way to prevent an empty parameter from showing as a "?" in a tag?
Windows 7RAC2012
I am currently doing an MEP project and I am tidying up the model at present. I am having problems attaching the walls to the roofs. There could be a simple solution but I haven't found it yet !
I have tried attaching top base etc. but its not working. I only seem to be able to select one side of the roof when selecting where to attach the walls. I have attached 3d pics showing the walls that are extruding & also one of the walls that I am trying to attach.
Just what the title says. Walls dont appear when drawing in plan view but appear in the 3d view. how come??
View 1 Replies View RelatedI drew some internal walls before adding a floor slab. After adding the floor slab the walls disappeared in plan. I can see them in 3D, in the correct place, but not in plan.
The floor slab is in the right position. To fix the problem I redrew them all, but why did they disappear and how do I prevent it from happening again?
using zoom wheel on mouse, how do i enable passing through walls, instead of continuing to zoom further and further in on walls
View 1 Replies View RelatedIs there a way to prevent walls from joining?
View 1 Replies View Relatedwhy my existing walls show up fine in my sheet but don't plot to .pdf. I have the view range settings set correctly and all other sheets plot fine.
I thought maybe the roof transparency was the issue but Revit is usually pretty much a WYSIWYG plotting operation and the walls are displaying in the sheet file. Haven't tried plotting to a plotter but it doesn't matter. I need to plot .pdf's.
How do you join a square wall to a slanted roof so that the walls are not sticking out of the roof.
View 1 Replies View RelatedHow to bridge the gap at the intersection of two types of wall. I’m wondering which “function” settings are required such that the intersection between two types of all walls (30 cm and 10cm) produce solid line.
View 2 Replies View RelatedDo I have to use the Stack Walls family in order to have my walls line up on top of each other between the levels? My walls are all slightly off in 3D view and look messy..
View 3 Replies View Relatedreinstalled revit and when i pick wall I can't choose generic walls.
View 2 Replies View RelatedIn my 3D View my walls disappear when I de-select the structural box. Although drawn as regular walls they are store front panels so carry no load other than their own weight. My Visibility Graphics dialog box seems to have limited options for this. Am I missing something? How do I get them to re-appear in my 3D View for rendering without switching them to a structural wall?
View 2 Replies View RelatedHow do you un-join walls so you can move one selection set without impacting the other?
View 2 Replies View RelatedI have one wall (basic wall) where !'ve edited to profile to have a large rectagle omitted. I have a second wall (curtain wall) that needs to occupy that space with a 1/2" gap on either side and a 1" gap along the top. I can maintain the gap along the top, but when the gaps along the sides shrinks below 1", the walls meet and the gap is reduced to zero. I've tried making the internal wall into a group, but whenever the outer wall's profile is edited to within 1/2", And I click the Finish button, the interior wall (inside the group) extends to meet it. Automatically Embed is turned off for the curtain wall. I've tried locked dimensions, but that didn't seem to work.
How I can maintain the gap without the walls closing?
I'm making a pool and i wanted to round the corners to make it seem more real. Is there a way to do a sort of "fillet" on the corners of the walls to make them round?
View 3 Replies View RelatedNeed to make a wall with varying height. For example, 3000mm at one end and 4000mm at the other. The result would be a sloped ceiling and roof. Should I make a 'mass' and attach a wall to it or is there a way to vary the height of an existing wall?
View 2 Replies View RelatedI'm having trouble inserting a bath in particular from the components tab. I go to components and I only have 3 items in the drop down list; termination board, construction trailer and metal support. How can I add a bath to the components list? The bath doesn’t work for all those families. I’ve added a bath to my project browser screen and dragged it in from there but I would like it to be in the components drop down lists. How do I do this? I’m using revit 2013. may be a very simple solution but it has had me stuck for some time
View 1 Replies View RelatedIs it possible to make the graphic represention of a component in a schedule (make a legend component representation a parameter) or use legends dynamically. I would like to schedule all the casework with quantities of each component. But the current schedule has a graphic representation next to the quantities but it is not in revit and the quanties are determined manually by counting them. I know there is a add on you can purchase to create dynamic legends but is there a way to do this directly in Revit?
View 1 Replies View RelatedIs there any way to tag a legend component? I'm trying to draw a "door types" drawing which shows the elevation of each type of door and I want to be able to place a title under each door that displays the door type mark. This is a very standard type of drawing that architects draw for almost every project and..after all...what could be more basic to a legend component then to be able to label it?
Now I use text to label each type of door...but if someone changes the door type mark and fails to update the legend also....I get a very un-Revit-like mis-coordination with my door schedule!
Currrently, we print floor plans to pdf's, open them in Photoshop and make them part transparent and part semi-transparent so that we can overlay them in various visual tools. Is there a way to create pdf's or images where the background is completely transparent and and solid patterns within the floor plan that are semi-transparent?
View 3 Replies View RelatedI have a solid gray filled region that is set to be transparent that is not being transparent. We are trying to put a gray tone over the existing area of the plan. what is weird is that I did the exact same thing to another view & it works perfectly with the region in the background & all the wals & doors showing up correctly. I can't figure out what is different between one view & another.
I've tried changing the filled region to be "moved to back" but nothing changes. if I override the graphics of the element & change it to be transparent the it goes away all together.