Revit :: Unjoin Walls To Move
Apr 8, 2013How do you un-join walls so you can move one selection set without impacting the other?
View 2 Replies
ADVERTISEMENT
Revit :: Change Thickness Or Move Walls In Project
Oct 29, 2013When I try and change the thickness or move most walls in the project I get multiple room volume warnings that pop up, in some cases 80 odd. These rooms in question can be on the opposite side of the building (60 Meters) and 3 or 4 stories up from the altered wall. So there is no way that all room volumes are overlapping. I've checked all the room volume heights, level placements and that rooms are all bound fine, which they are. I just can't figure it out.
I've figured out a work around but this can be a little time consuming and a little bit fiddly. Ideally I'd like Revit functioning properly and not have to keep reminding my team about the correct way to approach a wall change every time 80 new warnings pop up.
I have heard through the grapevine that this may be a bug that occurs in 2012 due to "internal disputes" we are unable to upgrade to later versions of Revit.
Revit :: Turn Mass Walls Into Structural Walls
May 28, 2013I want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies View RelatedRevit :: Can't Cut Walls With Voids
Jun 4, 2013I'm at my wits end trying to cut a wall with a void. I want to chamfer the corners of a wall, but I can't get even a basic void to cut from a wall. I get the error : "This Mass has no solid geometry for its Void Forms to cut. They must be deleted, or solid geometry added and cut." They clearly intersect, what am I doing wrong?
View 2 Replies View RelatedRevit :: How To Tag Rooms Without Walls
Mar 13, 2013How do you tag the rooms that are not fully enclosed by the walls?
View 1 Replies View RelatedRevit :: Clearly Walls Visible
Aug 29, 2012Why Revit 2013 when the walls are installed on some laptops is clearly visible.
View 1 Replies View RelatedRevit :: Certain Walls Can't Fillet
Jun 10, 2012There are certain walls I just can't fillet, what's the reason of it? See attached pict.
View 1 Replies View RelatedRevit :: Joining Walls To Roof
Apr 11, 2013I am currently doing an MEP project and I am tidying up the model at present. I am having problems attaching the walls to the roofs. There could be a simple solution but I haven't found it yet !
I have tried attaching top base etc. but its not working. I only seem to be able to select one side of the roof when selecting where to attach the walls. I have attached 3d pics showing the walls that are extruding & also one of the walls that I am trying to attach.
Revit :: Walls Do Not Appear In Foundation View?
May 2, 2013Just what the title says. Walls dont appear when drawing in plan view but appear in the 3d view. how come??
View 1 Replies View RelatedRevit :: Internal Walls Disappear
Oct 30, 2013I drew some internal walls before adding a floor slab. After adding the floor slab the walls disappeared in plan. I can see them in 3D, in the correct place, but not in plan.
The floor slab is in the right position. To fix the problem I redrew them all, but why did they disappear and how do I prevent it from happening again?
Revit :: How To Enable Passing Through Walls
Oct 23, 2011using zoom wheel on mouse, how do i enable passing through walls, instead of continuing to zoom further and further in on walls
View 1 Replies View RelatedRevit :: Preventing Walls From Joining?
Dec 30, 2011Is there a way to prevent walls from joining?
View 1 Replies View RelatedRevit :: Why Existing Walls Not Plot To PDF
Mar 24, 2013why my existing walls show up fine in my sheet but don't plot to .pdf. I have the view range settings set correctly and all other sheets plot fine.
I thought maybe the roof transparency was the issue but Revit is usually pretty much a WYSIWYG plotting operation and the walls are displaying in the sheet file. Haven't tried plotting to a plotter but it doesn't matter. I need to plot .pdf's.
Revit :: Joining Walls To Roofs
Dec 20, 2012How do you join a square wall to a slanted roof so that the walls are not sticking out of the roof.
View 1 Replies View RelatedRevit :: How To Bridge The Gap At Intersection Of Two Walls
Sep 27, 2012How to bridge the gap at the intersection of two types of wall. I’m wondering which “function” settings are required such that the intersection between two types of all walls (30 cm and 10cm) produce solid line.
View 2 Replies View RelatedRevit :: Lining Up Walls Between Levels?
Nov 25, 2013Do I have to use the Stack Walls family in order to have my walls line up on top of each other between the levels? My walls are all slightly off in 3D view and look messy..
View 3 Replies View RelatedRevit :: Can't Choose Generic Walls
Oct 13, 2011reinstalled revit and when i pick wall I can't choose generic walls.
View 2 Replies View RelatedRevit :: Visibility Of Non-structural Walls?
Apr 8, 2013In my 3D View my walls disappear when I de-select the structural box. Although drawn as regular walls they are store front panels so carry no load other than their own weight. My Visibility Graphics dialog box seems to have limited options for this. Am I missing something? How do I get them to re-appear in my 3D View for rendering without switching them to a structural wall?
View 2 Replies View RelatedRevit :: How To Maintain Gap Without Walls Closing
Nov 7, 2011I have one wall (basic wall) where !'ve edited to profile to have a large rectagle omitted. I have a second wall (curtain wall) that needs to occupy that space with a 1/2" gap on either side and a 1" gap along the top. I can maintain the gap along the top, but when the gaps along the sides shrinks below 1", the walls meet and the gap is reduced to zero. I've tried making the internal wall into a group, but whenever the outer wall's profile is edited to within 1/2", And I click the Finish button, the interior wall (inside the group) extends to meet it. Automatically Embed is turned off for the curtain wall. I've tried locked dimensions, but that didn't seem to work.
How I can maintain the gap without the walls closing?
Revit :: Rounded Walls On A Pool?
Sep 14, 2011I'm making a pool and i wanted to round the corners to make it seem more real. Is there a way to do a sort of "fillet" on the corners of the walls to make them round?
View 3 Replies View RelatedRevit :: Walls With Varying Height
Sep 1, 2013Need to make a wall with varying height. For example, 3000mm at one end and 4000mm at the other. The result would be a sloped ceiling and roof. Should I make a 'mass' and attach a wall to it or is there a way to vary the height of an existing wall?
View 2 Replies View RelatedRevit :: Clean Up Sections At Walls And Ceiling
Dec 3, 2012I am laying out a simple structure. Bearing wall to bearing wall is 35’, with a few non bearing walls between the bearing walls. I will be using a truss to span from bearing wall to bearing wall. What would be the best work flow for the drywall ceiling material. The ceiling seems to require a core element. I cannot seem to manage drywall alone. If I create a ceiling with 2x4 core and drywall finish and create a ceiling over the whole area the ceiling seems to auto dim to the ceiling finish and not the core 2x4. Then there is the issue of the clean up at the top plate were the wall and ceiling finishes meet
View 1 Replies View RelatedRevit :: IFC Export / Walls And Floors Don't Line Up
May 9, 2011I am doing some tests to export my model out to IFC. The slabs and walls do not line up. Revit 2012?
View 9 Replies View RelatedRevit :: Modify The Profile Of Curved Walls
Sep 26, 2011whether it's possible to modify the profile of curved walls. Normally when you select a wall, it should be possible to edit the wall and its profile, though when a wall is curved, the button "edit profile" is gray. Is there any other way to obtain a similar effect, maybe using masses or so?
View 2 Replies View RelatedRevit :: Breaking Of Walls At Intersection Of Another Wall?
Apr 12, 2013I want to break the wall at intersection point of another wall using Revit API's.
For instance , In screen shot attached :
Revit :: Create Perforated Walls / Screen
Sep 5, 2007I am working on a very large Metal Screen that is Approx. 55'-0" H x 240'-0" W.
I need to create the actual punched screen for my Revit Model Renderings and can not use a decal as an option. Each 4'x8' panel will be punched based on a Raster image that I have created an algorithm the convert the image to a Vector Autocad file so the metal fabricator can program the puncher. Every panel is different and thus can not be created and just copied over the entire screen.
The only way I have been able to attempt creating this screen hase been to Edit the profile of a wall. this method though is insanely time comsumming and not really an option, how to select all the lines brought in from cad together and edit. I have only been able to click individual lines...
I am attaching 2 DWG files, one that is off a full size portion of the screen and one that represents one panel (approx. 4' 8').
I am also attaching a RVT file that has the DWG brought in an placed on on elevation of the "wall".
Revit :: Window Opening In Two Parallel Walls
Dec 21, 2012Is it possible to have window opening in two parallel walls? the window crosses to the other wall which is not host wall anymore..
View 5 Replies View RelatedRevit :: How To Get Type Mark Details For Walls
Feb 28, 2013I am working on the Fire-resistance rating for the walls. I am trying to find out the "Type Mark" value for walls.
How can i get "Type Mark" value, also i need details information for "Type Mark" value.
Revit :: Holes Appear In Walls Previously Intersected
Dec 20, 2012I have this weird problem in Revit 2013. My walls that used to be joined with or intersected with other walls (now moved/ deleted) still bear holes/cuts in them matching the walls that joinded/intersected with them. I've tried to shorten the length beyond the holes and then extending the wall again, but as soon as the wall extends beyond the same point, the hole appears in it. Even when you delete the wall and draw a new one, the hole reappears exactly in the same area of the new wall, like there's an invisible wall intersecting it. There is no hidden wall there...I checked. The only way to remove the hole is to move the wall away from the area, which I can't anyway. What's the cause of this?
View 4 Replies View RelatedRevit :: Exterior Walls Have Variable Thickness
Nov 22, 2012I'm modeling un hold house and one of the exterior walls have variable thickness.
I don´t need two walls with different thicknesses but just one that is changing is own thickness along his development.
Revit :: How To View Each Option With All Walls In Black
Mar 12, 2013I'm working in a project that has 4 different options setup. I would like to be able to view each option with all walls in black. Currently I see some walls grayed out ( the primary walls) and some in black ?
View 5 Replies View Related
