I'm trying to make this tut (see at the bottom) I have already kpt effects installed but no kpt5 showed.. Anyone has a suggestion to make this tut...i'm still trying to figure out why it doesn;t work with me...(maybe a matter of upgrade or something...
View 2 RepliesWhen I (as I have in Photoshop CS2,3,4,5,5.5 and 6) click in the letting menu and change the letting, it allows me to change it and then when I click enter, it jumps down to a completely different number. I set it to 200 and hit enter and it drop to 19. I change it to 200 again, it becomes 47.
I am runnning the updated version of CC on windows 7 64-bit.
There used to be a circle onscreen that you could turn to change the amount of blur. And there were lines and or oval areas that could be made bigger or smaller to influence the area of blur. And while there are still pins that can still be placed to further control the blur, they don't really work. I also have the same problem with the new lighting effects as well.
View 9 Replies View RelatedWhen I have a large image and I try to crop it I cannot control where the crop is to take place. Sometimes I cannot make the selection as large as I want.
I am using CS
I cannot get PSE 10 organizer to work properly.......I will open the program and then click on the file drop down menu and the organizer will give me an error message that organizer has stopped working......My OS is Windows 7 on a 64 bit system and I had the computer specifically custom built to operate PSE...
View 9 Replies View RelatedI purchased and upgraded to Lightroom 4.0. Got things to work fine with some ACR updates for Photoshop CS3 that I'm currently using. Now have ACR 4.6 installed (the latest for my version of PS) as well as ACR 6.7.
I was able to make edits to the DNG RAW files in Lightroom 4.0 and then choose Edit in Photoshop (Command-E) and see those changes in a PSD file in Photoshop, where I could make further changes.
All of a sudden, I went to edit a photo in Photoshop and saw the original DNG file with no Lightroom edits. Some tinkering and update to Lightroom 4.1 but nothing can seem to make it show those Lightroom edits now when I go to Photoshop.
Mac OSX 10.7.3
Photoshop Lightroom 4.1
Photoshop CS3 Extended 10.0.1
I have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area. I use several different setting but I still have the problem.
I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None
I have Windows 7 and PS Elements 10 and can't get the text button to work properly. What can I do?
View 2 Replies View RelatedPhotoshop Elements 11 gives the opportunity to share pictures with Facebook. The facebook uploader doesn't work for me. Uploading in high resolution won't work at all. But even in standard resolution, the following problems occur:
1) uploader does not recognise albums in facebook, and
2) worst of all: uploades images won't be visible to friends, unless they dive into yout profile. I mean: in the uploader window i choose: visible to friends. When i log on to facebook, the images are there, but they are tagged as privat. Untagging them to 'visible for friends' won't work.
While uploading al settings are correct, in Facebook settings become different.
If I have elements on separate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected. That's not what I want! I only want it to select the colour range on that one level. The work around is to manually turn off other levels, but on a file with lots of levels, that can be tedious. Can this be avoided? Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).
View 15 Replies View RelatedThere is still an issue with making new actions that include saving for web. While recording the action, save for web functions as it should. But once the action is played, regardless of the original format the saved image should be, it gives it an html filename extension.
[URL]
I have spoken about this bug with a friend that is a computer programmer. Considering that the action is saving the file correctly, and it's only the name that is not saving properly indicates that this is a superficial error, and not an issue that would require rewriting the code completely. Also consider that this WAS functioning properly in CS5, and that this is a very easily reproducible bug.
I made a slide show in Elements 11 that will play from elements beautifully. I have burned it to cd 3 times and still it will not open, on the same computer. Says it will not open because it is the wrong type of file. What am I doing wrong? when I open it in Elements, it is exactly what I wanted. I need a cd to play at a graduation party, but it just WON'T work..
View 1 Replies View RelatedI 'm trying to create a window from the command panel( for example fixed) and firstly I can't create the width unless I go to modify nor can I add rails and panels.
View 2 Replies View RelatedI'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.
View 1 Replies View RelatedI am having problems with one of FX effects in corel video studio x3. When I select 'stationary' on the tick box and play back the video, the light still pans around the screen regardless of 'stationary' being selected or not.
View 2 Replies View RelatedI'm making userbars, and I'm using the trick to have multiple gradients in multiple layers. (I don't really think I'm doing it right though, first I make the whole first layer a certain colour, then go from the left with the next colour with the second colour transparent?) And for those layers, I'm trying to add the cloud effect (something to make it look nicer, I hate how lame/2d it looks without any effects) to all the layers with them blending into each other, but I eventually see one of the clouds effects under another effect/colour and it's just a big mess- I can see every colour mashed together. When I use the rectangle tool to select where the cloud effect goes, or the eraser to erase what I don't want, it looks kinda square like, and it doesn't blend with the other colour. ;-;
I have the plugins all downloaded btw.
Something strange happened recently where in order for my Right-Click Menu commands to work properly, and the double click ddedit to work, I had to take the "^C^C" out of the macro. All my related variables are set correctly, PICKFIRST, DBLCLKEDIT, etc...
What is happening is, I would get a selection set, right-click, copy with base point. Normally because the selection set is there, once a base point is selected, the command ends. In this case, after specifying the basepoint, I am asked to select objects again... This goes for ALL right click menu commands. Command line input is NOT affected.
I recently upgraded to LR4 (on OS X 10.7.4), but this problem was also present in the previous version.I usually move photos around using the OS X Finder (as sometimes they are outside my Lightroom catalog). To make the updates available in Lightroom I've always used the "Synchronize Folder" option. It did work perfectly for some time, but lately that is not the case.For example, here's a folder called "Parents".I added some photos to it using Finder, then tried to sync it.
Normally Lightroom would find the new files and allow me to import them. What happens here is that Lightroom wants to remove all the photos that already exist in the folder (and Lightroom catalog) and then re-import all of them + the new ones.
First I tried to select "Import new photos -> Show import dialog" and import only the new photos. That didn't work, too. (Please see the image below; however in this sample I've chosen to import/remove all of them).
As you can see Lightroom re-imports the folder as a top-level folder, but it should be a subfolder to "Other". When I try to move it manually to "Other" I get an error message that tells me that I can't do that as a folder with the same name is already there.
In the attached part if I change the value of the length parameter from 19" to 20" Work Axis 1 updates to the 19" location, if I change it back from 20" to 19" it goes to the 20" position.
In the images below, the axis should be in the center of that last slot.
I'm looking at tutorials on how to add strokes to text (I downloaded it today) and they say to use the color select tool. In their demonstration, when they select text, it has the normal dotted lines around it. For me, when I click it just has a thick border around it and it tells me to move my mouse to change the threshold. It won't select the text, just change the threshold when moving my mouse from left to right.
View 1 Replies View RelatedI'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast!
Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!
As what the title says, inputting Chinese characters in Illustrator CC on Mac is not possible. Is there any way to fix this besides waiting for Adobe to release a patch?
View 4 Replies View Relatedin print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)
View 8 Replies View RelatedI can start LR : but it gives immedidately the screen : unexpected error opening catalog, when I choose 'choose a different catalog' : he aks me to select a recent catalog to open, but this doesn't work en I neither can check the integrity of the catalog. Is there any possibility to do a repair of the program without losing my material from before ? When I search .ircat I can' t find any files.
View 1 Replies View RelatedWhen I try to open the material browser in Revit 2014, the screen opens. But suddenly Revit in totally doesn't work and it says 'Does not respond'When i try to close the material browser the whole program closes and my work is lost unsaved.
View 1 Replies View RelatedI downloaded the full package of mold design library and installed it following instruction. Unfortunately, it does not work properly. I failed to insert a mold base after creating core and cavity. The pop up window of Vendor and Type is empty.
View 6 Replies View RelatedWe had a brief powercut this morning, literally brief: it was less than a second. It was enough to turn off all our machines and since then my colleagues machine is acting in a weird manner.
It starts and opens LT2010 perfectly well but then selecting elements has no effect on the layer drop down. In properties it shows the element is one layer but the drop down shows another.
Double clicks no longer start the edit commands. Pressing delete key doesn't erase anything. I have checked in the CUI and all the key commands double clicks appear as normal.
We asked IT to repair the install, which they have done but nothing has changed. I did ask about going back to the restore point but the IT guy mumbled something technical I didn't understand then walked off to do the install repair.
previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
If I click on an eye symbol the symbol disappears, but not the elements on the screen like you should expect. There's also a weird behavior with the lock symbols. If I lock a layer, I can click the paths anyway. The lock symbols doesn't work anymore. The whole layers palette is useless now. I tried to remove the whole "Adobe Illustrator 17 Settings" folder, but that had no positive effect.
View 11 Replies View Relatedwhen importing in Lightroom 4, the auto tone adjustment function does not work properly. Most images come out strongly overexposed and there is no way to stop it
View 2 Replies View RelatedHow do you make a Photoshop psd website into a "properly coded" HTML file that will work on the web?
View 2 Replies View Related