There is a problem with photoshop cc 14.1 and it hasn't fixed on 14.1.1. when i press F5 for the brush panel it delete layers. starts when you have more then 1 layer. you have to fix this i'm pressing it alot while i'm working and it just deleting my work and by the time i notice it's too late
View 3 RepliesI just updated a few of our PS CC users to 14.1. We are all running mountain lion and we all have the same problem. The F5 key behaves just like the "delete" key. In CS6, the F5 key hides/shows the Bru
View 8 Replies View RelatedWe are using photoshop CS5 12.0.2 and OS X 10.6.8 and have run in to a serious problem. When we do a save as the file seems to delete the contents of some layers in the newly created image. The layer itself is still present but completely empty.
We haven't closed down the original file as we are worried it will delete the layer contents in the only file which is currently complete. It has already done this to other files which are now useless and we will have to start again. Flattening seems to delete the contents of the layer as well.
From time to time photoshop (cs4 and cs6) deletes our Wacom settings and we have to put every short key completely new in the wacom settings. how did this happen? how can we avoid that? or at least can we save the wacom settings somehow?
View 5 Replies View RelatedThe crop tool isnt working. It reduces the image to a gray background and a dot in the center> The whole image disappears.
View 1 Replies View RelatedClosing Photoshop CC seems to deletes all my files in and only in the Documents folder. The exact steps of what I did can be viewed here: URL.....This only happens to Ps, any other Adobe softwares will not cause this. I am 100% sure that it is the closing event that causes the deletion. After reading URL.. I tried to turn off the antivirus, reinstall Ps and creative cloud, but nothing worked for me. I also tried both 32 bit and 64 bit version, but both produced the same problem. This problem only comes up in Windows 8.1 and not Windows 8.
it is to change the folder name, but then I have to change the settings for other softwares which uses that folders and this is just stupid, I want a more robust solution and the cause.The only thing I haven't tried is reinstalling the OS.
My PC info:
OS: Windows 8.1 Pro (64 bit)
Processor: Intel i5-4430 3.0GHz
RAM: 1600MHz 8GB (dual-channel)
HDD: 120GB SSD
GPU: GTX 660
Crop tool deletes area within the marquee!? Never did this before!
View 7 Replies View Relatedokay, so i have a dynamic block. I am able to stretch it how i want BUT, the moment i add a text attribute to it, my block dissapears. this does not always happen, although i do the exact smae thing every time. what can i do to avoid the lock being deleted/hidden when i add a text attribute to it?
by the way, i am trying to stretch the text attributes with the block (or move, which ever choice of words you use)
I am using the latest (stable) version of LR5 on a up to date iMac. I was moving my photos (that is - the top level folders) from one drive to another in LR. After a while LR shows the error message saying the files couldn't be found. When checking in Finder I see the folder structure gets duplicated at the new location, the original folders are empty though and I can find the photos in trash.
View 4 Replies View RelatedI have been combining several Lightroom catalalogs into one using "Import from Catalog" from the Master Cat, and the process has worked smoothly for the most part. The one problem I am running into is that changes I made in the develop module in previous libraries before they were imported into the Master Catalog show changes in the develop module, but not in history, making it impossible to go back to the original image, or to track changes made in my previous smaller libraries. I often use Lightroom while traveling so that I can organize and touch up on the go, but when I return home I want to be able to combine these photos and edit them seamlessly, and this isa giant hiccup in my workflow.
View 3 Replies View RelatedI am trying to crop an image from 48" x 32" to use in a 24" x 12" project. I have to send the project to an outside company for processing after I am done. Having the image cropped and positioned in the drawing is critical.
When I set the crop area and double click inside the marquee, everything goes away on the entire project, lines, etc... except for the area I cropped on the image.
Power cliping the image doesn't yield the high resolution image file I need to send them. How to Crop in CorelDRAW X4 and only affect the image not everything on the whole page?
I created a associative and annotative hatch for a group of objects. It displays fine and the area measures fine. When I switch the annotative scale in the lower right for the whole drawing, portions of the hatch dissapear from the boundary objects - both visually and from the area in properties, When I switch back to original annotative scale, that area is still no longer there. In essense, parts of the hatch get deleted.
AutoCAD LT 2011
AutoCAD Civil 3D 2012
Modifying objects with constrains deletes the contains,
In the screenshot below, the two lines have the “equal” constrains. One of them is extended and thus both lost the “equal" constrains!
How objects can preserve constrains while being modified?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
PSP loses image with Crop under the following circumstance:
Make a selection --> Paste as new Image --> Make a Selection but then "accidentally" Move the selection, Choose the crop tool, Snap crop rectangle to current selection --> Apply.
My image now disappears: all gone ... so UNDO!
My scenario: PSP X3 Windows 7, lots of memory.
Trying to separate & cleanup many old photos scanned several at a time at 300x300 on an 8.5"x11" size scanner. So I select, copy, paste as new image for each photo.
I'm attempting to delete a design option that we created in order to alleviate model creation conflicts. We were testing whether it was to be a sub-category design option or a main heading, so I just modeled a couple things (in a floor plan that was created months ago in another design option) to try and get them to show up. When I realized that sub-category was not the way to go, I tried to delete that design option and it removed the floor plan I was using.
I examined the "Visible in Option" line and it has the name of an option that I'm not deleting, so....? Now what? I just want to clean up my model and remove that test design option.
My company uses a menu system to organize standard symbols. The problem is that every time I insert one of these symbols I have to reset my Osnap settings because it clears all the check boxes.
View 3 Replies View RelatedI unintendedly must have changed some settings in my photoshop 7, as the security text adding while creating a web-gallery doesn't work anymore.
The steps for creating a web-gallery I go through and finally choose the text to appear on every picture. However, while creating the web-gallery, photoshop automatically first adds the text, then deletes the text layer so that at the end no text appears on the picture, when the web-gallery is ready.
Running C3d 2012 here, but haven't used prior versions. I'm using fieldbooks to import survey data. If there is an error of some kind and I "Re-import event" for the fieldbook, then the occupied points from the field book are deleted out of the survey database and I get the resulting error of "point invalid" during the import. My fix is to go into my control drawing and import the control points from the drawing into the survey database then run the "re-import" again.
View 9 Replies View RelatedWe're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
Mediastudio 5 pro ultimate
Win7 64
AMD 960T on six cores
Asus M5A78L M LX +
8 GB
HD 3000 integrated graphics
OS is installed on a 128 MB SSD
Project target file is on a 500GB WD Blue.
I have ripped a Blue Ray DVD as an .m2t, at an average bit rate of about 18.5 Mb/sec, with a resulting file size of over 16GB. Needles to say this file bogs the machine when not running the proxy. When I finish a session and close the program, the proxy file is gone the next time I open the project. The same thing happens when the machine goes to sleep with the project open. I have to either slog through working directly on the project without the proxy while it slowly rebuilds, or wait a couple of hours for the rebuild to complete.
Any way to stop the file from being deleted? I went to power options and selected never, but the next day it was gone again.
Another thing would be to increase the speed of the proxy creation, as it only uses about 20% of the CPU. Better to get it done faster... I have tried raising the priority of the process to high with little if any change.
When I insert new data on an existing graph (for example, just adding a new year of data) and press insert, it just deletes the graph entirely. My only option is to recreate the entire graph which is frustrating because I lose its format and colors.
View 4 Replies View RelatedI have used text mask for a long while and in the past month, when I use the text mask function, it erases my text completely. I am refering to the express tools command; not the background mask in Mtext. I have checked the display order.
The text mask settings are correct where as it is placing a wipeout. If I turn on the frames, I can move the wipeout and there is no text underneath.
I've done several audits and recovers but no luck. This happens with all my drawings now, not just one.
How come baking some part of animation in graph editor deletes everything before and after the part i bake and how can i bake that part while leaving the rest untouched?
View 2 Replies View RelatedI'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.
View 2 Replies View RelatedI often will copy a layer in the layers palette via option drag. If the original layer is linked to another, the new layer is also linked to the orginal layer I copied as well as any other layers that original was linked to.
Is there anyway to option drag to copy a layer in the layers palette without the new layer being linked?
All of my image layers have randomly converted to smart object layers and I can no longer resize them in the ps document. Why would it do this and how can I undo it?
View 3 Replies View RelatedHow to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.
View 6 Replies View RelatedHow do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
I would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?
View 2 Replies View Relatedmerged layer results to a slight different color compare to its original unmerged layers. the result is that the merged layer has more bluish, What's wrong and what's the solution?. Im using CS3.
View 9 Replies View Related