Photoshop :: Closing CC Deletes All Files In Documents Folder
Nov 8, 2013
Closing Photoshop CC seems to deletes all my files in and only in the Documents folder. The exact steps of what I did can be viewed here: URL.....This only happens to Ps, any other Adobe softwares will not cause this. I am 100% sure that it is the closing event that causes the deletion. After reading URL.. I tried to turn off the antivirus, reinstall Ps and creative cloud, but nothing worked for me. I also tried both 32 bit and 64 bit version, but both produced the same problem. This problem only comes up in Windows 8.1 and not Windows 8.
it is to change the folder name, but then I have to change the settings for other softwares which uses that folders and this is just stupid, I want a more robust solution and the cause.The only thing I haven't tried is reinstalling the OS.
My PC info:
OS: Windows 8.1 Pro (64 bit)
Processor: Intel i5-4430 3.0GHz
RAM: 1600MHz 8GB (dual-channel)
HDD: 120GB SSD
GPU: GTX 660
View 3 Replies
ADVERTISEMENT
Aug 8, 2013
I am using the latest (stable) version of LR5 on a up to date iMac. I was moving my photos (that is - the top level folders) from one drive to another in LR. After a while LR shows the error message saying the files couldn't be found. When checking in Finder I see the folder structure gets duplicated at the new location, the original folders are empty though and I can find the photos in trash.
View 4 Replies
View Related
Jul 4, 2012
I am using iLOgic on Inv 2012 to try and close the active document using the following piece of code -
InventorVb.Application.activedocument.Close (True)
This close the document but brings up the following Error msg...
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
Any better piece of code that shuts down the active document but doesn't return the error? (I only want to shut down one document, not the application)
View 3 Replies
View Related
Sep 13, 2012
I’m going through a bunch of old files to see what I can git rid of.
After I view and then close a file in Illustrator CS6 I can delete the file, but not its containing folder, which stays locked, even after closing Illustrator. Restarting and closing Illustrator again usually enables me to delete the folder — but not always. Sometimes I have to close everything and log out and back in to be able to delete the folder. (BTW, Acrobat and Photoshop also share this problem.)
When you have, as I do, hundreds of files to go through, this becomes a real hassle.
View 3 Replies
View Related
Sep 26, 2012
I'm currently getting the "1324 Error. The folder path 'My Documents' contains an invalid character."
when trying to run AutoCad 2010. It had been working fine previously, but now it gives this error and won't allow me to use it. I am also unable to uninstall or reinstall the program without getting the same error.
I have confirmed that the profile is not set to roaming. I have also tried deleting the registry entries as recomended here:
[URL]
The user account is local administrator. The OS is Windows 7 64bit.
View 1 Replies
View Related
Feb 24, 2012
I've just upgraded to CS5 from Elements, boy what a difference! I've hit a problem when I want to close the photos that I've edited. when I've processed them I want to save them as either TIFF or JPEG files.
I've been to File>Scripts>Image processor which allows me to convert the files and send them to a folder of my choice - albeit in a sub folder. But, and it's a big but, the original RAW files remain open, and have to be manually closed one by one. After a big shoot this will be PIA.
I've also looked at File>Automate>Batch. This will process my photos, but on every alternate one I get a message saying that the "Feather" function is not working, and that photo is not processed, so i only get 50% saved. In addition they can only be saved in the original folder so I finish up with both RAW and processed files. Then I have to do a tidy up exercise.
What can I do? The first option seems the best if there was some way in which the processed files could be closed. I've told to create an action, but it doesn't tell me how to do it. I'm also told that I can download some actions in addition to the default actions, but again I'm not told what these are, or where they can be found.
All I need is to close multiple files that I've worked on and converted to my chosen storage format.
View 4 Replies
View Related
Mar 10, 2012
When I'm working in bridge transering files from one folder to another after a few transfers it closed down and I have to re open it again in PS.
View 1 Replies
View Related
Nov 2, 2012
In preparing photos imported from iphoto for a book, I've learned how to change the ppi and format, but when I try to move on I find I don't know how to save and close out of editing a photo. The photos either have red "edit in progress" bands, or multiple copies, or both.
I don't know where to save them, either.
View 2 Replies
View Related
Jun 28, 2012
I have been experiencing a problem with Photoshop CS5 12.1 in which, after a variable amount of time from a system restart, Photoshop will no longer open files or create new ones. It is very difficult to search for and/or explain the nature of this problem, but I will try my best.
Photoshop behaves completely normally after a fresh reboot of Windows until this problem presents itself.
The problem has manifested itself during use and before use. If it occurs during use, it seems that various features of Photoshop stop working. For example: I can't save files that are open. Photoshop will go through the motions of doing a "File > Save as...", but nothing happens on the file system. Restarting Photoshop at this point does not resolve the problem.
If Photoshop is already in this non-functional state upon opening, files cannot be opened nor new files created. Here is what happens during an attempt to open a file: Click "File > Open..."Open dialog is shown, I browse to select a ".psd" file to openOnce file is selected, click "Open" button on dialogDialog disappears, but document never opens If I try to use "File > New...", the New dialog never appears.
Once in this state, the only way to use Photoshop normally again is to do a full system reboot. This seems to indicate that something is slowly happening on my system (such as RAM usage) that eventually renders Photoshop inoperable. However, at the time of failure, there appears to be ample resources available for Photoshop to use.
if I need to clarify any of this further.
System Information Dumps:
PS Sysinfo (post failure) [URL]
DXDiag (post failure) [URL]
If it would be useful to include information from a fresh restart (pre failure)
View 60 Replies
View Related
Jan 31, 2008
Is there a way to merge two psd files into one? I'd like to copy a layer from an image file to another but it wont allow me to do so, so merging the 2 psd files is the only solution I can find.
View 6 Replies
View Related
Aug 29, 2012
I am trying to copy big assembly with its folders from one folder to another.I cant use Copy Design because I get too long path error.
Alternative way of copying files and keeping its relationships?
View 3 Replies
View Related
Sep 18, 2013
when i save my documents in gimp it doesnt show the network folder.i used to save my documents in shared folder which is in the another PC
View 7 Replies
View Related
Oct 18, 2012
Reinstalled Photoshop CS5 and updated again.Clicking a file starts Photoshop but does not open the file.If I click "new" to make a new file, nothing happens.
View 10 Replies
View Related
Jan 19, 2012
I opened my catalog today and went to one of my folders (2011/9 September). I noticed that there were pictures in the folder that did not belong and had the wrong name attached to them. I was surprized so I right clicked selected "Show in Finder" the folder 2011/9 September opened the photo was not in the folder.
Knowing the folder it should be in I went there and sure it enough it is there with it's original name.Went back to lightroom optimized the catalog... still there. Deleted folder in Lightroom, reimported, but the files came back.
The folder on the finder has 96 pictures, the folder in Lightroom shows 146.I can deal with removing the 40 odd files in this situation but I am afraid it will occur in one of the folders where there are a couple of thousand images.All my other folders seem fine for now, what would cause this issue?
View 4 Replies
View Related
Feb 16, 2013
I am no expert in AutoCAD Map3D, but as a IT Technician, I am responsable for installing and configuring the application.
I just did an upgrade from AutoCADMap3D 2012 -->2013. For the two users that I did the installation, they have been getting this error "Exception in command ARX covsrvechelle19.arx" screenshot attached.
The dxf file they are trying to access is on the network drive. With Map3D2012 they have never experienced this problem. I installed AutoCAD SP1 but the problem still persisted.
View 3 Replies
View Related
Apr 12, 2013
CS6 illustrator and photoshop not allowing me to open documents due to different reasons...damaged files, badly formatted, not compatible etc. However, these files were all created on the same computer and program therefore should be compatible. Is there a way for me to fix these files/prevent this from happening in the future?
View 1 Replies
View Related
Jun 22, 2013
Why can't files opened from AI CC created in AI CS4 be reopened after closing the window?–They reopen only if you quit and relaunch AI CC. Why can't anything be copied or pasted from keyboard commands or drop down menu open in AI CC? Why can't a new window be created in AI CC–only receive error code ID-1(Can't create a new illustration. Problems occurred while saving the print file.).
View 2 Replies
View Related
Oct 18, 2012
This refers to AC A2011, when looking at the recent documents in the pull-down, it ONLY shows .dst files. Selecting file types is not the solution...
View 3 Replies
View Related
Aug 21, 2013
Since My Documents is where I put all my *useful* files/folders, I like to keep it clean and organized. I don't want it cluttered up with folders that programs are using to store "work" files, as is the case with PSP. I went to preferences and laboriously changed ALL File Locations to the user/my-name/appdata/...etc. area. But when I saved, exited and reloaded PSP, those folders were created again. Checking the File Locations in preferences again showed that the appdata ones I had put in were still the top (primary) folder option, but the ones directing the files to "documents" had been created again as the third entry in each category.
How can I keep these folders/files OUT of My Documents?
View 8 Replies
View Related
May 30, 2011
I"ve just recently upgraded to CDGraphics Suite X5 (from 12), along with Windows 7 and M.Office 2010. When trying to export jpg's I've got 2 problems:
a) Jpg files that I"m now exporting seem to have so many more "options" for exporting and are automatically exporting colours as CMYK. Some of the software programs that I use (for programming digital signage) require jpg files in RGB. Is there a way to set this as a default instead of having to change this everytime I export? (note that I have "checked" the embed colour profile option for my US Web Coated Pantones).
b) The default for exporting is also set at "custom" - should I always be changing this to either medium or large, or can I just leave it at custom. Often I am just emailing jpg's for approval purposes, so I don't always need large file sizes. Does custom set it to the largest possible file size?
I found a tab at the top of the export window that says "Load Presets" and lists for example "low quality jpg.xml" what is this for?
c) when I look at my jpg files in my documents folders they appear "locked" with a little lock on them. Old jpg files created in CD12 don't have this little "lock" icon on them. I have checked the properties and see that these files give full access for modification etc, so I can't figure out why they may be locked.
View 3 Replies
View Related
Dec 30, 2013
I downloaded a Copy of AutoCAD Recent Documents Manager.exe from the autodesk website and it won't run on any of the computers in our system. I was thinking about writing a LISP routine to delete the filenames with a DST suffix by replacing them with the next filename in the list. My question is If I replace the file with the next one above and the filetime,filepinned and class respectively. When I reach the end of the list can I just use "" for the file,filetime and class and integer 0 for filepinned (it looks like it requires a double).
View 1 Replies
View Related
Mar 17, 2013
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
View 7 Replies
View Related
Mar 12, 2012
Following previous LR upgrades (3.2, 3.3, 3.4, 3.5 and 3.6), old files were automatically removed from the Program Files folder. However, I just upgrades from 3.6 to 4.0 and notice that the old files are still on my hard drive in the 3.6 folder. Do I need to keep these files or can I UNINSTALL LR 3.6?
View 5 Replies
View Related
Sep 12, 2013
There is a problem with photoshop cc 14.1 and it hasn't fixed on 14.1.1. when i press F5 for the brush panel it delete layers. starts when you have more then 1 layer. you have to fix this i'm pressing it alot while i'm working and it just deleting my work and by the time i notice it's too late
View 3 Replies
View Related
Sep 11, 2013
I just updated a few of our PS CC users to 14.1. We are all running mountain lion and we all have the same problem. The F5 key behaves just like the "delete" key. In CS6, the F5 key hides/shows the Bru
View 8 Replies
View Related
Dec 5, 2012
We are using photoshop CS5 12.0.2 and OS X 10.6.8 and have run in to a serious problem. When we do a save as the file seems to delete the contents of some layers in the newly created image. The layer itself is still present but completely empty.
We haven't closed down the original file as we are worried it will delete the layer contents in the only file which is currently complete. It has already done this to other files which are now useless and we will have to start again. Flattening seems to delete the contents of the layer as well.
View 1 Replies
View Related
Aug 26, 2013
From time to time photoshop (cs4 and cs6) deletes our Wacom settings and we have to put every short key completely new in the wacom settings. how did this happen? how can we avoid that? or at least can we save the wacom settings somehow?
View 5 Replies
View Related
Apr 13, 2013
The crop tool isnt working. It reduces the image to a gray background and a dot in the center> The whole image disappears.
View 1 Replies
View Related
Jun 21, 2012
Crop tool deletes area within the marquee!? Never did this before!
View 7 Replies
View Related
Oct 10, 2013
When I do "save as" the drop-down only gives me options to folders I've used recently. Up until last week I could at least choose "desktop" and then from that choose a folder on the desktop. But now "desktop" won't open up any more options. I must have changed something -- I've unchecked the preference for saving in the original folder in an effort to get back to where I was --
View 5 Replies
View Related
Feb 13, 2008
Whenever I start PS CS, I get a "The Folder Specified for Temporary Files is not Available" error message.
View 6 Replies
View Related
