AutoCAD Map 3D :: Exception Errors When Opening And Closing Files
Feb 16, 2013
I am no expert in AutoCAD Map3D, but as a IT Technician, I am responsable for installing and configuring the application.
I just did an upgrade from AutoCADMap3D 2012 -->2013. For the two users that I did the installation, they have been getting this error "Exception in command ARX covsrvechelle19.arx" screenshot attached.
The dxf file they are trying to access is on the network drive. With Map3D2012 they have never experienced this problem. I installed AutoCAD SP1 but the problem still persisted.
I have succesfully installed Autodesk Inventor 2011 (Student License) on my Windows 7 (64-bit) operating system without any errors. I can open Inventor 2011, but when I try to open a new or existing file, Inventor suddenly closes and the 'Autodesk Inventor Error Report'-window opens, giving the following error:
Error: Unhandled Exception
When I go to my project folders and try to open any inventor file, the following message appears:
"Inventor.exe needs to register with he operating system and the following programs (Explorer) are running and may prevent registration from succesfully completing. Autodesk recommends terminating the offending processes to ensure proper registration. Terminate these processes before continuing with the registration?"
If i cick 'Yes', the problem remains.
I've tried reinstalling, following the instructions carefully (installed as administrator), without success. I installed both service packs. I keep having the same problems, while in the past, it has been working perfectly, but I lost it because of hardware problems, which are now resolved.
Technical Info: OS: Windows 7 64-bit Processor: Intel(R) Core(TM) i5 CPU M430 @ 2.27GHz 4,00 GB RAM ATI Mobility Radeon HD 5650
I created two new projects yesterday and both of them had fatal exception errors on closing and they did generate a message that was sent to you.
I have not been able to open them or recover them. How can I recover these documents. I've tried to open them in AutoCAD WS... but they fail on upload. I've tried to attach the files, but it says they are too large.
I am a tech at a University and am working the new deployment image for our Architecture Design lab. I just installed AutoCAD 2013 and I get this error when opening Civil 3D.
Message Box
Title: Execption in c:program filesautodesksutocad civil 3d 2013aeccuipressurepip...
Body: Unhandled Exception C06d7E (Delayload "Fdo.dll" Module Not Found) at address FD90CACdh
I have tried reinstalling and copying fdo.dll and aeccuipressurepipes.arx from the install files to installed location and still get this error.
System specs: Dell Precision T3500 Operating System: MS Windows 7 Professional 64-bit SP1 CPU: Intel Xeon W3530 @ 2.80GHz RAM: 6.00 GB Triple-Channel DDR3 Graphics: ATI FirePro V7800 (FireGL) (Dell)
i wanna make a gate leaf opening and closing , is that even possible in autocad 2011 , like an animation , cant find anything on youtube tried to do it with camera etc etc.
This is an annoying change from acad 2007 to acad 2011. Every time I start and end the Mtext command, as the dialog box opens and closes, the screen "shudders", or "jumps" a little. It is hard on my eyes. I have explored the MTEXTFIXED and the MTEXTED commands, but I can't get it to settle down.
I am using Inventor 2011 and vault. When I go to insert another instance of an IFeature i get a message that says "cannot insert iFeature that is currently open for edit (see attached) The .ide file and the part used to extract the iFeature are both closed and not checked out of the vault.
The only workaround I know of is is to close the file and open it up again.
When pressing Ctrl + Alt + shift a menu pops up for Scratch Disc preferences. and there are 4 drop down menus with the labels First, Second, third, and fourth. The First drop down has options "Startup" and "C:". The other 3 have "none" and "C:". I'm not sure on what to do to correct this frustrating error. I have Already changed the first to the C drive. and tried many combinations still doesnt work.
I am repeatedly running into the same problem of a data linked table losing its formatting upon closing and opening the file.
Each time this happens, I am forced to enter the properties tab and return the height of the text and the height of the cell to the size that it had originally been. Is there an option that I have not seen? What is continuously causing this error?
When opened, PS CS6 generates a "Could not complete your request because of a program error" dialog. I click OK and the program runs. However, File>Automate>PhotoMerge generates Error 8800 with reference to Line: 1085 --> if ((app.systemInformation.search(/PhotomergeUI/) < 0
I delete the program, reload from Cloud and it runs OK until update the program via cloud services. Repeat above error sequence.
Out of the blue I've started receiving the following error when opening any and all Illustrator files out of CS5: The operation cannot complete because of an unknow error. [PARM]
I don't use or create scripts. It doesn't matter how big or small the AI file...always with that error. I can click "OK" and the file appears totally in tact.
My project crashed. I tried reopening it, but from then I've been getting the following error messages. While restarting my system or AE usually works, this time the project wouldn't reopen no matter how I approached this.
Steps I've taken so far:
-Restarting my computer. -Restarting After Effects -Importing the .aep file into AfterEffects -Opening the file on a different computer. -Trashing preferences and reopening the Project in AfterEffects. -Opening one of my 5 at a 15 minute interval generated Auto-save files.
All result in the same error.
see attached images to see the error I'm getting.
The final message can't be clicked away and when I click the exit button at the top right of the application the application crashes and prompts me with a default windows error screen.
Used source footage: XDCAM files in a .xmf container
Some information about my system: ______________________
After Effects CC (version 12.0) with all recent updates from the cloud as of 21th of august
Windows 7 Professional Service Pack 1 Dell Precision T3500 Intel(R) Xeon(R) CPU W3550 @ 3.07Ghz 3.07Ghz 8 GB RAM 64-bit operating system
I have had numerous application errors which result in the PS CS4 shutting down unexpectedly. 1 such error message: "The exception unknown software exception (0xc000000d) occurred in the application 0x78138a8c". It happens repeatedly when I try and create Brushes, when I open normal jpg files, when I create new file. There seems to be no direct correlation between an action and a crash. (I have worked on CS2 with nothing like this ever happening.)
I've just upgraded to CS5 from Elements, boy what a difference! I've hit a problem when I want to close the photos that I've edited. when I've processed them I want to save them as either TIFF or JPEG files.
I've been to File>Scripts>Image processor which allows me to convert the files and send them to a folder of my choice - albeit in a sub folder. But, and it's a big but, the original RAW files remain open, and have to be manually closed one by one. After a big shoot this will be PIA.
I've also looked at File>Automate>Batch. This will process my photos, but on every alternate one I get a message saying that the "Feather" function is not working, and that photo is not processed, so i only get 50% saved. In addition they can only be saved in the original folder so I finish up with both RAW and processed files. Then I have to do a tidy up exercise.
What can I do? The first option seems the best if there was some way in which the processed files could be closed. I've told to create an action, but it doesn't tell me how to do it. I'm also told that I can download some actions in addition to the default actions, but again I'm not told what these are, or where they can be found.
All I need is to close multiple files that I've worked on and converted to my chosen storage format.
when i select all images in a folder and try to drag/drop them to another folder, all transfer except one image which fails and produces the below error. if i just close the error box, i can (usually) then drag the one file to the target destination folder. sometimes the one file continues to fail, producing the same error. if thats the case, the only way i can get the one file to move is to first move it to a different folder then drag it to where i want.
In preparing photos imported from iphoto for a book, I've learned how to change the ppi and format, but when I try to move on I find I don't know how to save and close out of editing a photo. The photos either have red "edit in progress" bands, or multiple copies, or both.
Closing Photoshop CC seems to deletes all my files in and only in the Documents folder. The exact steps of what I did can be viewed here: URL.....This only happens to Ps, any other Adobe softwares will not cause this. I am 100% sure that it is the closing event that causes the deletion. After reading URL.. I tried to turn off the antivirus, reinstall Ps and creative cloud, but nothing worked for me. I also tried both 32 bit and 64 bit version, but both produced the same problem. This problem only comes up in Windows 8.1 and not Windows 8.
it is to change the folder name, but then I have to change the settings for other softwares which uses that folders and this is just stupid, I want a more robust solution and the cause.The only thing I haven't tried is reinstalling the OS.
My PC info: OS: Windows 8.1 Pro (64 bit) Processor: Intel i5-4430 3.0GHz RAM: 1600MHz 8GB (dual-channel) HDD: 120GB SSD GPU: GTX 660
Why can't files opened from AI CC created in AI CS4 be reopened after closing the window?–They reopen only if you quit and relaunch AI CC. Why can't anything be copied or pasted from keyboard commands or drop down menu open in AI CC? Why can't a new window be created in AI CC–only receive error code ID-1(Can't create a new illustration. Problems occurred while saving the print file.).
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
I am facing problem to view dwf files.some dwf files i send to others.they unable to open it.also i got some dwf files when i open it says"Your current design review dose not support files of these type" i try to open it in different version.i m using windows 7 ultimate and autocad 2010.
a colleague has 2013 and when he opens a file e.g.. Rob's cottage.dwg it is listed/shown as Drawing 1 in ACAD and if he tries to save he needs to browse to the folder and select the file called Rob's cottage and overwrite.......is this a setting I can't recall?
don't have PC specs handy, but was running fine for 2012 and previous versions (on subscription)
We have lots of legacy files from older projects (R1/R2/R3)? and need to view the IDWs. Inventor will not open them. Inventor View states we need to migrate them. So how do we view these old files?
One of my customer is having many .drw files. Can we open or import them in AutoCAD or AutoCAD Mechanical or Autodesk Inventor or in any of the applications from Autodesk Product Design Suite? If not, in any of Autodesk products?
When opening a file, or attaching an external reference, the file dialog box does not always default to the last folder where a file was opened for attached from. It was defaulting to the folder at the top of the list on the left side of the dialog box until I deleted the cloud icon. But, there is still a problem with defaulting to the last path accessed.
I just started an internship at an engineering firm, and they are interested in using a few of my drawings that I have done on Inventor Pro 2013. They currently use AutoCAD2011. I am thinking that it is not a possibility, but, is there any way that I can open one of my .ipn files from Inventor into a file that AutoCAD recognizes and can open?
I have an issue with opening my old drawing files (.dwg). I usually make a backup copy of all the drawings I have done and save them according to the project numbers. The drawings I have difficulty opening were done ages ago and backed up on a CD.
When I was trying to open the drawings from the CD, I received error messages saying "cannot find the specified drawing file. Please verify that the file exists". I also noticed that all of those drawing files are of size between 30Mb and 35Mb. So clearly, there is some data in them.
I also tried to do copy and paste from the CD to my local machine but to no avail. It said the file may be corrupted or something. I do not know if this is to do with losing path or what.
When opening non native dwg files (exports say from solidworks) it doesn't bring the file into the correct areas in relation to the model being in the model space, drawings being in the paper space and not just pasting into Autocad from the non native file.
