AutoCAD Architecture :: Recent Documents Only Shows DST Files
Oct 18, 2012This refers to AC A2011, when looking at the recent documents in the pull-down, it ONLY shows .dst files. Selecting file types is not the solution...
View 3 RepliesThis refers to AC A2011, when looking at the recent documents in the pull-down, it ONLY shows .dst files. Selecting file types is not the solution...
View 3 RepliesAny way to stop the recently opened Sheets Sets from showing up? To me, it's highly irritating and they always crowd out my .dwg's. All you have to do is open any sheet file and the Sheet Set Manager opens automatically.
View 5 Replies View RelatedWorking in ACA 2012 on a Windows 7 machine. Noticed that pinning documents in the "Recent Documents" under the main menu is acting goofy. If I pin a document (so that it presumably stays there no matter what) and then open other drawings, the pinned drawing gets pushed down the list just like any other. Eventually, it gets pushed off the list just like all the others.
Is there a system variable I'm not aware of that controls this feature? Or is this just a bug, but since this feature is rarely used no one has noticed it?
I downloaded a Copy of AutoCAD Recent Documents Manager.exe from the autodesk website and it won't run on any of the computers in our system. I was thinking about writing a LISP routine to delete the filenames with a DST suffix by replacing them with the next filename in the list. My question is If I replace the file with the next one above and the filetime,filepinned and class respectively. When I reach the end of the list can I just use "" for the file,filetime and class and integer 0 for filepinned (it looks like it requires a double).
View 1 Replies View RelatedAttached is a zip file with a standalone program to aid in cleaning up the Recent Documents list for all flavors of AutoCAD, 2009-2013.
It's pretty self explanatory, just be sure to run it with no sessions of AutoCAD, or vertical products, running. It should refuse to run if it sees any Acad.exe application in the running tasks list. Once the dialog opens it will show you all of the Autocad related products you have installed, select one and it will fill in the first list of recent documents. Then select a profile for that product and the second list will populate with the SSM related recent documents saved for that profile. You can then select any item from either list, if the same DST filename exists in both lists it will automatically select them both. Use the standard selection methods to select more than one (shift-click, control-click, window).
Be sure to Unblock, if needed, the zip file before extracting the exe file. (Check the file properties)
Any way to remove the .dst listings in the "Recent Documents" list on the "File" pulldown? We use Civil 3D mostly with dwg files and they are usually pushed off the list because of Sheet Set Manager files. Some of these dst's haven't been opened in weeks? But there still at the top of the list....very unproductive when you have to go searching for a dwg file you were just working on.....
Civil 3D 2012
Windows 7 Pro (64bit)
Intel Xeon W5580 @3.20GHz
12gig RAM
NVIDIA Quadro 600
How to remove all the files on the “recent document”?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
From the inventor file menu how to get an in correct recent files list? I get a list that i never worked on. When I carefully take a look, it shows a combination of couple files i worked on and a many files that my colleagues worked on.The tool tip shows it reading from c: empxxxx
View 1 Replies View RelatedEven though I know how to work arouind this, it still takes me 2 or 3 times to pick one from the list.
View 6 Replies View RelatedThis only happens on one person's prints. All layers are thawed/on. Yet when he prints, there's a random line going across the drawing at 45 degrees. This happens if he prints from paperspace or modelspace. The line shows up right from the print preview. Since it only happens on his computer
View 1 Replies View RelatedI'm using a block with thick polylines. When i copy it to another drawing the thickness does'nt show anymore, only the contours drawn in thin lines.
How do I get my wide polylines to show correctly? Is there a setting I should know about?
I'm attaching an image of the block the way it should look, and one of how it looks when I paste it in drawning no 2.
I just recently noticed that when I print documents from Revit Architecture, they are printing smaller than the scale size they are set to. I verified with a couple of different scale settings against a good old fashioned scale ruler. It seems to be consistently incorrect.
View 3 Replies View Relatedusing Save As to a network path that is not persistent. When starting CS3, it fails to open until network paths in recent files are restored.
It seems to lookup all recent file locations while starting up.
Just starting to use 2014, and so far not so good. I tend to keep the Properties Palette open and docked. In 2014, if my current layer is 0, any object I select in a drawing shows as Layer 0 in the Design tab of the Properties palette. If I change to a different layer, any object selected shows that layer in the Properties palette. If I start a new drawing, enter WALLADD and draw a wall segment, the A-WALL layer now correctly appears in the Layer Manager, but when I select the wall, the Layer in Properties is the current layer, not the A-WALL layer it should have gone on. Also, Quick Properties is on, but doesn't pop up anywhere.
View 5 Replies View RelatedMy Recent Files list not longer updates so that, when I start Revit from the Start menu, I can't specify the file to open at the same time that I start the program. Once Revit is open, the Recent Documents list, from the Application button, is correct. All other programs, including AutoCAD and Inventor, show up correctly in the Start menu.
View 5 Replies View RelatedI have been working on a project all week, including today. I saved my project again today at 5:00 p.m. closed Illustrator and went to dinner. Came back home, logged into Illustrator at 6:30 p.m. and my project is not there. When I go into "open recent files" the only files that come up are dated last week.
View 5 Replies View RelatedWhen I start Lightroom from the schortcut to Lightroom 4.1 in the Windows Start-menu it works fine.In the Startmenu there is also a list of recent files that appears on "mouse over" on the Lightroom shortcut.When I click one of those recent files, my computer starts an installation process (for the 64 bit version) as if Lightroom weren't installed already.After 30 seconds of searching for the installation files at a standard location, the program states that it didn't find the files.
Because LR already is installed I click Cancel to terminate this process and just try to aviod clicking the recent files next time.
I installed a lightroom 4.2 and i was about to import my pictures but lightroom cant read my files in my computer. It can read files but those files are from years ago. I wonder why my recent files cant read. I dont know what to do. I already reinstalled it but then again its still the same. I dont think it was on the installing the lightroom but i am suspecting that it has something to do with the catalog?
View 1 Replies View RelatedThe recent files are not listed in the welcome dialog box or under file menu recent files drop down list? How I can get it to list again?
View 1 Replies View RelatedFor some reason very often in PS CS3 if I go to File > Open Recent it doesn't show me the most recent files.
View 2 Replies View RelatedWhere do you edit the paths of the recent files in the welcome screen for Mudbox (2013 SP3) ?
View 3 Replies View RelatedI haven't been able to figure out how to get more than ten file options FILE> OPEN RECENT FILES
I tried Preferences and searching the library.
In previous versions this was unlimited. It allowed me a quick way to view catalogs I have worked on even months ago.There are no options inside Lightroom 5 to adjust this that I can find.
So is there a file I can modify in the Lightroom system folder or in the registry that will remove the limited number or increase the number allowed in the list?
Many times the file I would like to open was the sixth or seventh. how to enlarge the Recent Files list to be say 10 in CD X4 and PP X4?
View 6 Replies View RelatedEvery time I launch Paint Shop Pro X5 my recent file list is empty. I thought the program was supposed to remember the last four images that were opened. I then have to select File > Open but now the program defaults to a folder called My Pictures. I store my images in my own folder elsewhere. I would like to set my folder to be the default folder. I have to navigate to my folder ever time I launch the tool. If I go to File > Preferences, I do not see a place where I can change the setting.
View 4 Replies View RelatedUpon startup of CorelDraw X4, I get an error message and the debugger opens (macro) and highlights a line of code in the Recent Files macro. I suspect it may be a Windows 7 update since about 15 updates were installed today.
P.S. - resetting workspace by pressing F8 at startup is not an option.
Is there a way to clean (or parcial delete) files in "FILE > OPEN RECENT" history?
[URL]
I am running Mac 10.6.8 and recently upgraded to PS6. I can no longer print to my Epson 3880 nor can I open NEF files. I have applied all udates from Apple, Epson and Adobe.
View 2 Replies View RelatedAfter this error when I click cancel to delete the files and start again shows the same error deleting the remaining files.
View 6 Replies View RelatedAll of a sudden I notice that when I open a file in Autocad Architecture, it shows the file creation date and not the actual last save date. Only thing I can think of is I reinstalled 3dsmax Design and I wonder if that changed something. I attached a screenshot for reference.
Building Suite Premium
Win 7, ultimate
i7 1.86ghz, 4meg ram
ATI 5730
I'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.