In previous versions this was unlimited. It allowed me a quick way to view catalogs I have worked on even months ago.There are no options inside Lightroom 5 to adjust this that I can find.
So is there a file I can modify in the Lightroom system folder or in the registry that will remove the limited number or increase the number allowed in the list?
I haven't been able to figure out how to get more than ten file options FILE> OPEN RECENT FILES
I tried Preferences and searching the library.
For some reason very often in PS CS3 if I go to File > Open Recent it doesn't show me the most recent files.
View 2 Replies View RelatedIs there a way to clean (or parcial delete) files in "FILE > OPEN RECENT" history?
[URL]
I am running Mac 10.6.8 and recently upgraded to PS6. I can no longer print to my Epson 3880 nor can I open NEF files. I have applied all udates from Apple, Epson and Adobe.
View 2 Replies View RelatedI'm running LR 4.1 with ACR 7.1 on a Windows 7 64 bit OS.
I set my preferences to open most recent catalog.
I then open another catalog and do some stuff in the catalog but when I start LR next time it keeps going back to a different catalog. How can I change the settings so it either opens the most recent catalog or I get prompted for which catalog I'd like to open (I've tried both settings) and LR still keeps opening the same catalog.
When I start Lightroom from the schortcut to Lightroom 4.1 in the Windows Start-menu it works fine.In the Startmenu there is also a list of recent files that appears on "mouse over" on the Lightroom shortcut.When I click one of those recent files, my computer starts an installation process (for the 64 bit version) as if Lightroom weren't installed already.After 30 seconds of searching for the installation files at a standard location, the program states that it didn't find the files.
Because LR already is installed I click Cancel to terminate this process and just try to aviod clicking the recent files next time.
I installed a lightroom 4.2 and i was about to import my pictures but lightroom cant read my files in my computer. It can read files but those files are from years ago. I wonder why my recent files cant read. I dont know what to do. I already reinstalled it but then again its still the same. I dont think it was on the installing the lightroom but i am suspecting that it has something to do with the catalog?
View 1 Replies View RelatedI tried to open 400 TIFF CCITT group 4 files from the Photoshop CS3 as I used to do in Photoshop 7, but I got an error message: "Could not complete the open command because opening the number of files selected would cause Photoshop to have more than 200 documents windows open at once". Does anybody know if there are any limitations on the maximum allowed number of files to be opened at the same time?
View 4 Replies View RelatedI can't open Illustrator: get message "can't set the maximum number of files to open"
I'm using Creative Cloud on a Macbook Pro with Mountain Lion.
I can not open Illustrator. I bought it a few years ago as part of a CS5 package.It show "unable to set maximum number of files to be open" this is the error message.[code]....
View 1 Replies View RelatedHave just upgraded to LR 3.5 but same problem persists. At times one of the pics suddenly develops pink boxes.
I was told this is either a problem with card reader or card. I have been checking for solutions for a couple of weeks, never thought it was card or card reader. Today I opened a folder of pics into LR that I know were fine but suddenly one of the pics developed these pink blocks. That pic is finished, I have tried closing down and re-opening and even opeing that pic in another programme but that pic has had it.
#1. My cameras are Canon 7D's and I shoot raw. Is there a maximum number of pics I can open in LR?
#2. In spite of defrags etc my PC is running very slowly nowadays and I get the feeling that that is the area causing the problem and may not be a LR prob at all. Is it possible that LR crashes on a pic if it cannot assemble all the information it needs within a set period?
I have a point cloud with 161 million points in it. This is basically fine and works well but I need to create equally high resolution surfaces from certain regions of the point cloud. No matter what size I choose my export shape, it will only create a surface from a ridiculously small 750,000 odd points, a 'feature' which has been documented on these forums before. I have POINTCLOUDDENSITY set to 100.
My question is, how can I build a surface from this high resolution point cloud data that has more than 750,000 odd points?
I'm thinking about mosaic'ing - ie. making several smaller surfaces over the required area and pasting them together.
I have Created a Block which has got some 12 attributes , when i invoke insert command and insert the Block , It was displaying only first 8 attributes , then when i click next the remaining four attributes were displayed under the previous inputs which i have given .
that is for eg : If i have attributes named a,b,c,d,e,f,g,h,i,j,k,l .
In the first dialog box it asks
a =
b =
c =
d =
e =
f =
g =
h =
then i click next
e =
f =
g =
h =
i =
j =
k =
l =
so inputs for e,f,g,h and all given already but it was displayed
again so i need to press tab key for 4 times and come to input "i = " and so on
I don want this to happen. i want it either all 12 prompted in single dialog box or
atleast no repetition of prompts.(8first&4alone in next)
And i already knew about the System Variable attdia & i dont want to give input via command prompt
I have a point cloud dwg. Is there a way to increase the number of points displayed? The properties of the cloud say there is 14,000,000, but it only displays 34,000. Is there a way to increase the 34,000 number? See Image.
View 2 Replies View RelatedWhat I'm after in an 'increase photo resolution' tool similar in result to PhotoAcute Studio (without the hefty price tag). I suspect this may be available but named something else.
View 2 Replies View RelatedI run CS$ on Vista. The 'Files>Open Recent' list bear little or no resemblance to the images I actually had open recently. I am not on a network, and the only one working on this computer.
View 10 Replies View RelatedI have a simple hexagon block with one attribute, i need to be able to copy it and as i do it increases the number by one.
the Block name is note1-2006 the attribute name is NOTENUM. I have tried using some other Lisps but i cant ge them to work. Sometimes i have to put 40 of these on a sketch i hate copying and changing the attribute by one everytime. so it would be nice to copy and as i pick mutliple spots it increase number. Dont know if there is a way to ask user to keep same number or increase. This would save me so much time.
Is it possible to be able to delete individual files from the Open Recent Menu ?
View 2 Replies View RelatedYesterday I lost my open recent list? It is greyed out. why they went away. This has never happened to me since corel 3
View 2 Replies View RelatedEvery time I try to select the text of an item in the open recent list the recent list will disappear before I can select it. I've discovered that I must carefully move my mouse pointer down the left column that precedes the entries in order to select any of them. Autodesk, could you fix this so that anywhere on each item is selectable and the recent list stays open until the mouse moves off of it?
It is said that a fool's voice is known by multitude of words... I'm just writing this stuff instead of saying it outloud... that's my loophole.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
I've just started a new job, and I'm on a PC with CS6. (I'm used to Mac, CS5)
I can't seem to get 'open recent file' to work in any of my CS6 programes It is always greyed out and never remembers what I've last done. Does it have something to do with the files being stored on a passworded server?
using Save As to a network path that is not persistent. When starting CS3, it fails to open until network paths in recent files are restored.
It seems to lookup all recent file locations while starting up.
moved from PC to Mac by external hard drive. Remapped path to images. Everything is fine but when I do the folder sync command it shows me 100 % of my images as missing and the same amount as new files. There are no explanition marks in the tree view and this is the only indicator that something is wrong.
On the PC everything is fine. If I click on show file in finder for a picture finder opens with the correct file marked.
So I wonder whether I can trust that folder sync feature?
My Recent Files list not longer updates so that, when I start Revit from the Start menu, I can't specify the file to open at the same time that I start the program. Once Revit is open, the Recent Documents list, from the Application button, is correct. All other programs, including AutoCAD and Inventor, show up correctly in the Start menu.
View 5 Replies View RelatedI have been working on a project all week, including today. I saved my project again today at 5:00 p.m. closed Illustrator and went to dinner. Came back home, logged into Illustrator at 6:30 p.m. and my project is not there. When I go into "open recent files" the only files that come up are dated last week.
View 5 Replies View RelatedThe recent files are not listed in the welcome dialog box or under file menu recent files drop down list? How I can get it to list again?
View 1 Replies View RelatedWhere do you edit the paths of the recent files in the welcome screen for Mudbox (2013 SP3) ?
View 3 Replies View RelatedHow to remove all the files on the “recent document”?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
From the inventor file menu how to get an in correct recent files list? I get a list that i never worked on. When I carefully take a look, it shows a combination of couple files i worked on and a many files that my colleagues worked on.The tool tip shows it reading from c: empxxxx
View 1 Replies View RelatedEven though I know how to work arouind this, it still takes me 2 or 3 times to pick one from the list.
View 6 Replies View Related