Lightroom :: Set Preferences To Open Most Recent Catalog?
May 19, 2012
I'm running LR 4.1 with ACR 7.1 on a Windows 7 64 bit OS.
I set my preferences to open most recent catalog.
I then open another catalog and do some stuff in the catalog but when I start LR next time it keeps going back to a different catalog. How can I change the settings so it either opens the most recent catalog or I get prompted for which catalog I'd like to open (I've tried both settings) and LR still keeps opening the same catalog.
View 4 Replies
ADVERTISEMENT
May 3, 2013
I have LR3 on a Mac running OS 10.6.8. My catalog, cache and images were stored on an external Lacie 1TB drive (partitioned so it can be used by a pc and mac). My catalog backup files were saved on another external drive MXTR as well as copies of all my images. The Lacie had started self ejecting while running LR3 and I thought it was maybe a problem with the cable, as it would work fine after rebooting. Yesterday it crashed LR3 and never remounted. I used Disk Utility to try and repair the disk and it instructed me to erase the disk and start over. I was not worried, since my catalog was backed up to another drive. . Another 2 hours to copy my images from the MXTR to the Lacie (again the drive never self ejected during this time either). So now I go to find my most recent backup catalog. The most recent one I could find was dated 2/09/2012. I am baffled. What happened all those times I was backing up? I upgraded to LR3 in 2011, and I don't remember ever telling it to backup to another folder or drive.
View 1 Replies
View Related
Mar 12, 2014
In previous versions this was unlimited. It allowed me a quick way to view catalogs I have worked on even months ago.There are no options inside Lightroom 5 to adjust this that I can find.
So is there a file I can modify in the Lightroom system folder or in the registry that will remove the limited number or increase the number allowed in the list?
View 12 Replies
View Related
Jan 26, 2012
I thought there was a way to have LR open in a certain specific place every time you open it?
View 2 Replies
View Related
Dec 8, 2013
My PC has three drives
C for the programs, D for the photos and F for the backup photos
With the upgrade to Elements 12, C is nearly maxed out
Except for "C" there are multiple catalogs on each drive, C should have none
I do not see an ability to convert the most recent catalog on each drive?
When a catalog is converted - does it reside on the same drive as the catalog?
If a catalog ends up on the wrong drive, for example C - can I just move/drag it to another drive?
Your catalogs end up under something called "breeze data" and are very diffcult to find, why are they called this?
This conversion appears to have placed the converted photographs in 'C", is that possible, since they were not there at the start?
When I tried a conversion earlier this evening, it only did the most recent photographs I had accessed, how do I ensure it gets them all?
Since it did a partial conversion, will the rest of the conversion land in the same catalogue or in a completely new one?
When a file is converted, and I return to the drive, how will the icon be changed so that I know it has been converted?
For the previous elements 10, can I just drag it from Drive C to D (that way I can still use it with the pictures I have not converted), and have it still operate or must it reside in a program files folder?
As I type this I wonder if I might not be better off with just leaving the photographs as they are on 10 and starting afresh on elements 12
View 3 Replies
View Related
Feb 19, 2012
I was importing into LR3 for the first time and while I was filling out info (renaming files), my MAC started to pinwheel. Finally I was forced to "force quit". Now when I try to relaunch LR from my alias or the HD it gives me this message; "LIghtroom cannot use the catalog because it is not writeable and cannot be opened".
View 2 Replies
View Related
Feb 19, 2012
i just installed LR version 3.6 trial yesterday and it end up failling to upload the previous LR catalog that i install in past and crash,
attach here is the error picture.
i have try to uninstall + reinstall it but same problem occured. The worst part it i have deleted the lightroom catalog permanently in my pictures folder and the img catalog that attach in the pictures.
View 2 Replies
View Related
May 13, 2012
i cannot open a catalog it says its already open by an instance of lightroom all other catalogs open but they do not containe all my photos any info would be great i have shut down and restarted the computer but the problem is still there
View 2 Replies
View Related
Feb 26, 2012
I can't open a certain LR catalog. It actually opens briefly, but then LR crashes within 5 seconds. No warning or dialog box shows up, the program just disappears.
I can open other catalogs, but these are old and are of no use to me. I have also deleted my preferences, but to no avail.
Is there any way to repair a corrupted catalog if you can't even keep it open?
View 8 Replies
View Related
Oct 1, 2013
I was working on an LR5 catalog yesterday (which I unfortantely didn't back up) and today it won't open. I don't even get an error message or a repair option, all LR does, is open a small grey window. LR is leaving the lock file after I close it down, but even after deleting it and restarting the computer LR won't open the catalog (which is on an external harddrive).
View 1 Replies
View Related
Mar 28, 2014
Basically I can only open some of my catalogs in Lightroom, Lightroom just hangs with nothing on the screen and I have to force quit it.
Yesterday I installed the lightroom plugin 'Jeffrey Friedl's Eport to Flickr'
I am using Lightroom 4.4
View 1 Replies
View Related
Dec 13, 2013
I've used LR since 2.0 and upgraded easily each time. I've purchased and loaded 5.3. Clicking on LR5 icon from desktop brings up message that my catalog named "xxx".
Lightroom will create a new catalog file in the destination indicated below. The previews will also be moved to this location and converted for use in LR 5.
I click "UPGRADE" and after a few hours of watching the little green line progress across the monitor nothing works" I've done this twice and rebooted the PC.
View 3 Replies
View Related
Dec 2, 2012
For the past 2 months, I have been working on images in LR 4.2. As of this morning, I am unable to open my LRCAT file. The error screen tells me the requested catalog is being used by another LR program. HUH? I have opened my Task Manager (windows 7) and nothing is running. I don't want to loose all the work on the images I have done up to this point.
View 3 Replies
View Related
Jan 7, 2013
I cannot open Lightroom catalog bc there is 'not enough room on the hard drive named.' I keep erasing more and more on this hard drive and still it does not work and keeps saying the same thing.
View 7 Replies
View Related
Jun 23, 2012
I just upgraded my processor and OS to Windows 7. I reinstalled Lightroom 3. When I try to open a catalog, I get an error message that it cannot be opened because it is not writable.
View 2 Replies
View Related
Feb 10, 2012
I have been trying to open lightroom but I keep getting a catalog error. I have uninstalled and installed almost three times and it still hasnt fixed it. I was learning how to use lightroom then I was just seeing what a catalog was I guess I did something wrong and i got the error. it says cant open dadsfamilypictures 101.jpg.ircat it was a whole file of pictures. I dont know how to get it to work.
View 2 Replies
View Related
Dec 20, 2011
Just upgraded to 3.6 and using Windows Vista 64bit. When I go to open a recent catalog I keep getting prompted to back-up the catalog eventhough the selected time between back-ups has not elapsed. It just always prompts me to create a backup whenever I exit the catalog or LR. When viewing catalog A and swithing to catalog B and exiting, when I start LR again it opens with catalog A instead of B. I re-checked the settings and LR is set to open to the previous catalog but it is not doing so.
View 3 Replies
View Related
May 21, 2013
My daughter turned off my MAC mid-session edit and now I can't load any pictures from any session let alone that session I was working on. I even tried to close out and back up and it won't back up the catalog..way to get my images back.
View 1 Replies
View Related
Dec 4, 2012
"The Lightroom catalog named Tamara & Nate cannot be opened because another application already has it opened."
Is what I get everytime.
I'm getting this over and over again.
Re-started lightroom and my computer it doesn't go away.
View 3 Replies
View Related
Feb 10, 2014
I tried to import a photo from a file on my computer. The Lightroom 3.6 program shut down. When I try and open the program, a message appears that says "Lightroom - Opening Catalog: DSC_2155.lrcat
Immediately after that appears on my screen a box appears that says "Adobe Photoshop has stopped working" underneath it reads "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
Of course I never get notified and a solution is never available. I've tried deleting Lightroom and reloading the program but the same problem occurs.
View 2 Replies
View Related
Aug 21, 2009
I run CS$ on Vista. The 'Files>Open Recent' list bear little or no resemblance to the images I actually had open recently. I am not on a network, and the only one working on this computer.
View 10 Replies
View Related
Jan 5, 2012
I am having problems running Lightroom. I re-installed and I get a windows error.
I used the trial for only one day. I received my serial number and re-installed and
I still get a windows error saying the application has stopped working. Lightroom begins by trying to open a Catalog with a .JPG.lrcat extention. I don't have that file and not sure why it continues to try to open that file when I uninstalled Adobe Lightroom and removed it's file directory. I also cleaned out my recycle bin recommended by the readme file.
View 2 Replies
View Related
May 26, 2013
I have an old computer running LR 3.6. I have downloaded, installed and entered my serial number for LR 4.4 on my new computer. Can I simply copy my 3.6 catalog to the new computer and open it with LR 4.4?
View 1 Replies
View Related
Feb 15, 2013
I'm running LR2 (I know, first step, UPGRADE!), but in the meantime, I had to move my catalog because my drive got full. Under the Backup dialog box I chose the new location. But when I just click on the LR icon to open the program it opens with the default C: drive catalog location that it first installed with. Then I open the specific catalog from in the program and relaunch it. I have LR set to bring the dialog box everytime I start LR since I don't use it everyday. So I back it up when the dialog comes up and when it's done it goes right back to the default catalog with none of my library in there. Why do I have to keep opening the catalog manually?
View 7 Replies
View Related
Jul 15, 2011
Is it possible to be able to delete individual files from the Open Recent Menu ?
View 2 Replies
View Related
Oct 17, 2012
I cannot open LR4. I get an, "Unexpected error opening catalog. The catalog could not be opened due to an unexpected error." This occurred after a WIN7 update failed. It restored the system to an earlier version. In doing so, it also reverted LR4.2 to LR4.1. I have seen other threads to open a different catalog and/or create a new. The problem is that once I go to "Choose a different catalog", I get the Windows screen where I can select my backup. I select the backup catalog and click "Open". The window goes away, but the underlying LR "Select a Catalog" window still only shows 1 catalog to open.....my original catalog. The backup doesn't show up in the list. (The backup is not a network drive and it is not read-protected.)
I then try the "Create a new catalog", get the Windows screen, enter a new name and click "Save". The same thing happens. The Windows screen goes away and the LR "Select a Catalog" window still shows the orignal catalog in the list. Thus, I cannot create nor choose a different catalog.
View 5 Replies
View Related
Aug 26, 2013
We are attempting to run Lightroom in our photo journalism classes and we are unable to setup the application because it will not create the Catalog file.
All of the users in Open Directory have their OSX 10.8 home folder stored on our Apple Server. This enabled them to log into any of the computers in the lab and have access to their data/documents.
Lightroom refuses to create the Catalog file because it treats the home folder as a network folder.
My predecessor found some way around this in the past but he didn't document it and I can't find any evidence of it either.
Surely there are other people out there trying to use Adobe Products who also utilize Apple's "Open Directory" (its like apple's version of Active Directory).
View 1 Replies
View Related
Jul 25, 2012
Yesterday I lost my open recent list? It is greyed out. why they went away. This has never happened to me since corel 3
View 2 Replies
View Related
May 22, 2008
For some reason very often in PS CS3 if I go to File > Open Recent it doesn't show me the most recent files.
View 2 Replies
View Related
Jun 27, 2013
I haven't been able to figure out how to get more than ten file options FILE> OPEN RECENT FILES
I tried Preferences and searching the library.
View 4 Replies
View Related
Jan 28, 2013
I merged a small catalog with my master catalog and I am unable to open the master catalog. The error message reads "The Lightroom catalog named “master_catalog-2” cannot be opened because another application already has it opened.". There are no other applications running the catalog.
View 2 Replies
View Related
