I have been trying to open lightroom but I keep getting a catalog error. I have uninstalled and installed almost three times and it still hasnt fixed it. I was learning how to use lightroom then I was just seeing what a catalog was I guess I did something wrong and i got the error. it says cant open dadsfamilypictures 101.jpg.ircat it was a whole file of pictures. I dont know how to get it to work.
View 2 RepliesI cannot open LR4. I get an, "Unexpected error opening catalog. The catalog could not be opened due to an unexpected error." This occurred after a WIN7 update failed. It restored the system to an earlier version. In doing so, it also reverted LR4.2 to LR4.1. I have seen other threads to open a different catalog and/or create a new. The problem is that once I go to "Choose a different catalog", I get the Windows screen where I can select my backup. I select the backup catalog and click "Open". The window goes away, but the underlying LR "Select a Catalog" window still only shows 1 catalog to open.....my original catalog. The backup doesn't show up in the list. (The backup is not a network drive and it is not read-protected.)
I then try the "Create a new catalog", get the Windows screen, enter a new name and click "Save". The same thing happens. The Windows screen goes away and the LR "Select a Catalog" window still shows the orignal catalog in the list. Thus, I cannot create nor choose a different catalog.
LR 5, not 5.2, is giving me "Unexpected error opening catalog" with the suggestion I attempt to open another catalog. All my recent catalogs give me this error.
I'm using Windows 7 with fully adequate ram and storage. The program was working OK until today.
I back up daily and that always includes optimization. I did find an earlier catalog that comes in successfully.
The Lightroom program demands lots of hours of study and work and if errors like this are frequent I'll have to reconsider its usefulness for my photography.
I was importing into LR3 for the first time and while I was filling out info (renaming files), my MAC started to pinwheel. Finally I was forced to "force quit". Now when I try to relaunch LR from my alias or the HD it gives me this message; "LIghtroom cannot use the catalog because it is not writeable and cannot be opened".
View 2 Replies View Relatedi just installed LR version 3.6 trial yesterday and it end up failling to upload the previous LR catalog that i install in past and crash,
attach here is the error picture.
i have try to uninstall + reinstall it but same problem occured. The worst part it i have deleted the lightroom catalog permanently in my pictures folder and the img catalog that attach in the pictures.
i cannot open a catalog it says its already open by an instance of lightroom all other catalogs open but they do not containe all my photos any info would be great i have shut down and restarted the computer but the problem is still there
View 2 Replies View RelatedI can't open a certain LR catalog. It actually opens briefly, but then LR crashes within 5 seconds. No warning or dialog box shows up, the program just disappears.
I can open other catalogs, but these are old and are of no use to me. I have also deleted my preferences, but to no avail.
Is there any way to repair a corrupted catalog if you can't even keep it open?
I was working on an LR5 catalog yesterday (which I unfortantely didn't back up) and today it won't open. I don't even get an error message or a repair option, all LR does, is open a small grey window. LR is leaving the lock file after I close it down, but even after deleting it and restarting the computer LR won't open the catalog (which is on an external harddrive).
View 1 Replies View RelatedBasically I can only open some of my catalogs in Lightroom, Lightroom just hangs with nothing on the screen and I have to force quit it.
Yesterday I installed the lightroom plugin 'Jeffrey Friedl's Eport to Flickr'
I am using Lightroom 4.4
i am getting "unexpected error opening catalog" message when opening a catalog that worked fine 2 days ago. Other catalogs open on the same drive Mac pro LR5.3 ..Lots of worked had gone into that catalog.
View 3 Replies View RelatedPC/Vista x64bit
I've been running LR 4.1 for a few weeks without a hitch.
Just now I tried to open it and I got an 'Unexpected error opening catalog' message. Since there is only one catalog, I chose 'Choose a different catalog' and created a new one. LR opened fine then.
However, I could not open the existing catalog, even from within LR.
Holding down the Alt key before clicking the LR icon in the System Tray opens a window headed LR 4.1 64-bit Properties. There are various tabs in the window. I'm not sure what I should be doing with any of them. If I click on OK at the bottom of the window, nothing happens.
Finally, in C/Program Files/Adobe/Adobe Photoshop Lightroom 4/ the Master Catalog.ircat is visible. But, just below this, in /Lightroom 4.1, there is no Master Catalog.ircat. Is this normal?
I've used LR since 2.0 and upgraded easily each time. I've purchased and loaded 5.3. Clicking on LR5 icon from desktop brings up message that my catalog named "xxx".
Lightroom will create a new catalog file in the destination indicated below. The previews will also be moved to this location and converted for use in LR 5.
I click "UPGRADE" and after a few hours of watching the little green line progress across the monitor nothing works" I've done this twice and rebooted the PC.
For the past 2 months, I have been working on images in LR 4.2. As of this morning, I am unable to open my LRCAT file. The error screen tells me the requested catalog is being used by another LR program. HUH? I have opened my Task Manager (windows 7) and nothing is running. I don't want to loose all the work on the images I have done up to this point.
View 3 Replies View RelatedI cannot open Lightroom catalog bc there is 'not enough room on the hard drive named.' I keep erasing more and more on this hard drive and still it does not work and keeps saying the same thing.
View 7 Replies View RelatedI just upgraded my processor and OS to Windows 7. I reinstalled Lightroom 3. When I try to open a catalog, I get an error message that it cannot be opened because it is not writable.
View 2 Replies View RelatedJust upgraded to 3.6 and using Windows Vista 64bit. When I go to open a recent catalog I keep getting prompted to back-up the catalog eventhough the selected time between back-ups has not elapsed. It just always prompts me to create a backup whenever I exit the catalog or LR. When viewing catalog A and swithing to catalog B and exiting, when I start LR again it opens with catalog A instead of B. I re-checked the settings and LR is set to open to the previous catalog but it is not doing so.
View 3 Replies View RelatedMy daughter turned off my MAC mid-session edit and now I can't load any pictures from any session let alone that session I was working on. I even tried to close out and back up and it won't back up the catalog..way to get my images back.
View 1 Replies View Related"The Lightroom catalog named Tamara & Nate cannot be opened because another application already has it opened."
Is what I get everytime.
I'm getting this over and over again.
Re-started lightroom and my computer it doesn't go away.
I tried to import a photo from a file on my computer. The Lightroom 3.6 program shut down. When I try and open the program, a message appears that says "Lightroom - Opening Catalog: DSC_2155.lrcat
Immediately after that appears on my screen a box appears that says "Adobe Photoshop has stopped working" underneath it reads "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
Of course I never get notified and a solution is never available. I've tried deleting Lightroom and reloading the program but the same problem occurs.
Trying to troubleshoot a weird issue w/ Lightroom 5.3 on a PC. Updated my current catalog and wanted to import a couple of old catalogs to consolidate images. The first two of the old catalogs updated and imported just fine, previews were merged, data seamlessly integrated -- all good. But the third catalog is giving me no end of grief. It goes through the update process to be LR5 compatible, but when I say "import everything" on the list of found images/folders, it tries for a bit, then fails out with "unknown error". This happens regardless of what I pick from that catalog -- even a single folder. It also happens if I export a sub-catalog from the old catalog and try to import that. But the updated catalog runs just fine on its own.
I've tried optimizing the offending catalog and checked for any possible issues with folder names, missing images, incompatible formats etc. etc.
I'm reluctant to try the "reverse" operation and import my main catalog back into the old, "challenged" catalog for fear of future corruption.
How do I correct this error, "The catalog could not be opened due to an unexpected error."?
View 1 Replies View RelatedGoing back to look for photos in LR is very tedious due to this error. I fully expect this error to occur multiple times while locating a past photo. I have to do it in steps by closing LR often, and reopening it so I don't have to start at the beginning of the search when this error occurs. LR does not write a current position to disk until closed (it should write current), which means it forgets where I was after this error.
My photos are in directories by year/date. Expanding a year to find a photo is like fully expecting this error to occur. My preferred import arrangement is year/date (to minimize the length of any one physical file list based in the way I shoot). I don't know if it's the arrangement, but this errors a LOT. I am on V4.4, and this error has been occurring for as long as I can remember. The product testers are obviously not running into this error since it isn't getting fixed. I don't think they test the left pane very well for the various directory schemes that a user can come up with.
My catalog previews were recently rebuilt. The catalog is around 5gb and contains all my photos. I am using SSDs for the LR user files, catalog, raw cache, and previews. Only the actual photos are on spinners.
I'm running LR 4.1 with ACR 7.1 on a Windows 7 64 bit OS.
I set my preferences to open most recent catalog.
I then open another catalog and do some stuff in the catalog but when I start LR next time it keeps going back to a different catalog. How can I change the settings so it either opens the most recent catalog or I get prompted for which catalog I'd like to open (I've tried both settings) and LR still keeps opening the same catalog.
I am having problems running Lightroom. I re-installed and I get a windows error.
I used the trial for only one day. I received my serial number and re-installed and
I still get a windows error saying the application has stopped working. Lightroom begins by trying to open a Catalog with a .JPG.lrcat extention. I don't have that file and not sure why it continues to try to open that file when I uninstalled Adobe Lightroom and removed it's file directory. I also cleaned out my recycle bin recommended by the readme file.
I have an old computer running LR 3.6. I have downloaded, installed and entered my serial number for LR 4.4 on my new computer. Can I simply copy my 3.6 catalog to the new computer and open it with LR 4.4?
View 1 Replies View RelatedI'm running LR2 (I know, first step, UPGRADE!), but in the meantime, I had to move my catalog because my drive got full. Under the Backup dialog box I chose the new location. But when I just click on the LR icon to open the program it opens with the default C: drive catalog location that it first installed with. Then I open the specific catalog from in the program and relaunch it. I have LR set to bring the dialog box everytime I start LR since I don't use it everyday. So I back it up when the dialog comes up and when it's done it goes right back to the default catalog with none of my library in there. Why do I have to keep opening the catalog manually?
View 7 Replies View RelatedWhile trying to load a photo from catalog in Lightroom 4 Develop Module, load fails and I get message "an unknown error occurred." What does this really mean, what is the fix? Using PC and Vista.
View 2 Replies View RelatedWe are attempting to run Lightroom in our photo journalism classes and we are unable to setup the application because it will not create the Catalog file.
All of the users in Open Directory have their OSX 10.8 home folder stored on our Apple Server. This enabled them to log into any of the computers in the lab and have access to their data/documents.
Lightroom refuses to create the Catalog file because it treats the home folder as a network folder.
My predecessor found some way around this in the past but he didn't document it and I can't find any evidence of it either.
Surely there are other people out there trying to use Adobe Products who also utilize Apple's "Open Directory" (its like apple's version of Active Directory).
I merged a small catalog with my master catalog and I am unable to open the master catalog. The error message reads "The Lightroom catalog named “master_catalog-2” cannot be opened because another application already has it opened.". There are no other applications running the catalog.
View 2 Replies View RelatedI have changed from 32 bit pc to 64 bit and can't open my previous catalogue, I get an error message saying catalogue might be open and used with another program (which it isn't) or I might need permissions.......
View 5 Replies View RelatedI have been using lightroom 5 today and it suddenly asked me to update my catalogue to LR5, which I did and now I cannot open up the programme at all.
View 4 Replies View Related