I have an old computer running LR 3.6. I have downloaded, installed and entered my serial number for LR 4.4 on my new computer. Can I simply copy my 3.6 catalog to the new computer and open it with LR 4.4?
View 1 RepliesI recently purchased a new computer, and I need to transfer my existing Lightroom (3.6) catalog to the new machine. I have installed Lightroom on the new machine, and have updated it to the same version as on the old machine. All my images are on an external drive that I can move to the new computer.
Can I simply export the existing catalog, move the hard drive, and import the catalog into the new instance of Lightroom on the new computer? Obviously, I want to retain al the keywords, develop adjustments, etc., that I had in the original catalog.
I have a separate catalog of photos from a recent trip on my laptop (don't ask why I created a 2nd catalog - won't do that again). I want to transfer them to our desktop, which is a mac (the laptop is pc). Following instructions in a tim grey email, I used "export catalog" to transfer to an external hard drive, with intent to then import to the mac. I did check for it to export negative files. It took forever, but froze partway through the process. So I created a new folder to export into, and tried it again. It got much further that time but froze again. When I use lightroom to access the files that did transfer, I find the folders labelled as they are on the laptop, but when I open them, the application says, "no items match your search", although it does indicate there are i.e. 47 MG in the file. I can use picasa to view the files, both the jpeg's and the raw files, so they're in there.
View 4 Replies View RelatedI have LR installed on my MacPro and the Mac just died (graphics card issues). I'm going to just buy a new Mac, though I'm trying to figure out the best way to access everything in LR until then. All of the images and photos are stored on a separate internal drive that I can take out and access via a docking station.
1. Does the license for LR allow me to install a 2nd copy on my Mac notebook?
2. If I place a copy of the LR catalog file on my Mac notebook and plug the photos/videos drive into a docking station connected to my notebook, will everything open up?
I just built a new PC and re-installed lightroom 2.0. I downloaded the upgrade to 2.7 (which was free) and tried to import my catalogs. My 2010 catalog is fine, but my 2011 catalog says it is "too new for this version of lightroom". I never had version 3 so i dont know why it's saying my catalog is too new.
View 1 Replies View RelatedI have a Mac Pro and just bought an iMac.
On my Mac Pro, the LR catalog is on the boot drive. The photos are on a separate internal drive.
My plan is to copy both the photos and the LR catalog to the 3 TB Fusion drive of the iMac.
Would I then just double-click on the catalog to open it, and use this process to "reconnect" the missing photo files?
I recently had a computer crash and want to migrate my photos and changes from my old hard drive into my newly installed Lightroom software on the new computer. I recovered the old drive, and accessed it from my new computer. I found the most recent Lightroom catalog and imported it. Then I imported all of my photos into Lightroom. The problem is that the catalog and the photos don't seem to be talking to each other. In the catalog, the photos are there all bunched together, no folders separating by date. In the photo folders that ARE separated by date, the original photos are there as they were first imported (RAW files), but don't have the develop changes that I made to them. How can I get these two things to link up?
View 2 Replies View RelatedMy problem is that when I'm importing photos from my folders on the computer to my catalog in Lightroom 4, Lightroom doesn't import all photos from my folders. It imports the first 3-4 photos rom my folder.
View 1 Replies View RelatedSomething went wront on an ingest of my images. I think I tried correcting it by going into my /workingfiles folder were they were stored and deleting them manually. I'm sure I checked to see if I could do it through Lightroom, but maybe I missed the folder they were put in. I am guessing that is what happened so Lightroom still has a small image of them somewhere and will no longer let me re-import them.
Image Ingester Pro 3
Lightroom 4.3
Windows 7 Home Premium 64
Have new computer 64 bit with dual drives (C: 111GB, E:1.36 TB) . C. drive operates Win 7. Do I install CS 6 and LR4.1 program on E drive along with catalog including phtos? or put CS^ and LR on C: and catalog and pictures on E:
View 2 Replies View RelatedI have a Book I'd like to put together. Problem is, I have some phtos here at work to use, and some at home. Is it possible to copy the book from one compter to another, so I can work on the book at both locations?
View 2 Replies View RelatedI recently reformatted my computer and I just realized that I lost all of my export presets even though I copied the catalog over. I've searched Finder in the all the usual places that Adobe programs store user data but I can't find them. where I can find my export presets to copy to my new home folder?
View 2 Replies View RelatedI am not sure if I am going about this the right way, but once of the frustrations I deal with is managing my portfolio of images.
What I have recently done is create a seperate catalog for my portfolio image seperate from my "working catalog". My question is, once I have identified an image from my "working catalog" how can I copy it to my portfolio catalog?
From LR4 on my desktop PC, I used to be able to select File->Import From Another Catalog..., navigate to a catalog on a networked laptop, select which photos/dates I want to import, then choose to Copy Photos to a New Location and Import. This would both copy the photos over the network to my desktop, and add the photos to my desktop LR catalog - in one step. Always worked great for me for getting travel laptop photos back into my main desktop & LR catalog.
Both desktop and laptop recently upgraded to LR5. But now when I try this same procedure - the "Import From Another Catalog..." dialog no longer has the option to Copy Photos to a New Location and Import. The only options are Add New Photos To Catalog Without Moving and Don't Import New Photos.
Of course I can work around this by doing it with 2-3 extra steps: I can import over the network like above, but choose Add New Photos to Catalog Without Moving and then later copy the files & find the missing photos. Or export to a separate catalog & copy everything, etc.
So what happend to the Copy Photos to a New Location and Import option in LR5? Was this option removed explicitly? Or is there something else I'm missing (file path permissions, etc) that would cause the option to not be shown?
Lightroom 5 64-bit for Windows, ver 5.0
Desktop: Windows 7 64-bit
Laptop: Windows 8 64-bit
I replaced my computer, and now reinstalled lightroom and created a new catalog and wanted to import photos and copy from backup, however, lightroom is not offering me the copy function
View 3 Replies View RelatedI use to have all my pictures in a single catalog - "MyPics". It contains around 50.000 photos.
Last week, LR4 has silently created a new copy of my catalog: "MyPics-2". No warning, no message. I did not notice immediately.
The 2 catalog files have roughly the same size, but the preview folders are very different: old: 350MB, 100 files, 115 folders new: 280GB, 47000 files, 34000 folders I assume it moved the preview files from old to new.
Is my assumption of moved preview files correct? Is this related to the upgrade from LR3.6 to LR4?
LR4, Win7x64, 8GB Ram
I have a brand new ASUS notebook Win 8 64 bit.
LR4.3 installed to the C: drive (default installation). I am now copying from my external drive all photos to the larger D: data drive.
Of course, I have the very latest catalog backed up to multiple places. The old laptop (Windows 7) was just a single C: drive instead of the two drives I now have.
2 Q: 1) To what location do I copy that backup LR4 catalog?
2) As I remember from some years ago, I also need to double-click on that LR4 catalog once it's in the proper place. Is that right?
I have installed a new primary disc (C: in Windows 7 Pro) and re-downloaded LR4.2 release candidate. Can I simply copy the existing LR catalog (which I have on old disk, still accessible via USB, or from several backup copies) to the new disc and LR will work as it did previously. The drive letters of the locations of the actual image files (on other internal drives) have now changed so how do I tell LR to now use the new drive letter locations.
View 1 Replies View RelatedHow do I copy the list of keywords in an existing LR catalog to a new LR catalog?
View 2 Replies View RelatedI have copied the contents of an intermitant disk into a new one; outside of ligthroom(4). How do I copy the edits embeded into a ligthroom catalog to the new disk? Both disks have the same files. My master catalog sees the edits in the original disk. This same catalog sees the new disk without the edits in the original disk.
View 8 Replies View RelatedI can drag and drop a preview from one folder to another but I have not discovered yet how to make a copy by dragging and dropping in the library module
View 8 Replies View RelatedI had copied a .PNG file into the source folder and wanted to import it into the Lightroom catalog.
However the import dialog does not show that file in the source folder at all.
I also tried the method of selecting the source folder and using the "Synchronize" option. But that did not show the .PNG file either.
My clumsy work-around was to open the file in CS6 and save it as a .JPG file.
So my question: how can I tell Lightroom which file types (extensions) I want to be able to import?
My LR is currently only showing the photo folder. I have forgotten how to make it show all the folders on my computer and the external hard drive. What is the command to toggle back and forward?
View 2 Replies View RelatedI was importing into LR3 for the first time and while I was filling out info (renaming files), my MAC started to pinwheel. Finally I was forced to "force quit". Now when I try to relaunch LR from my alias or the HD it gives me this message; "LIghtroom cannot use the catalog because it is not writeable and cannot be opened".
View 2 Replies View Relatedi just installed LR version 3.6 trial yesterday and it end up failling to upload the previous LR catalog that i install in past and crash,
attach here is the error picture.
i have try to uninstall + reinstall it but same problem occured. The worst part it i have deleted the lightroom catalog permanently in my pictures folder and the img catalog that attach in the pictures.
i cannot open a catalog it says its already open by an instance of lightroom all other catalogs open but they do not containe all my photos any info would be great i have shut down and restarted the computer but the problem is still there
View 2 Replies View RelatedI can't open a certain LR catalog. It actually opens briefly, but then LR crashes within 5 seconds. No warning or dialog box shows up, the program just disappears.
I can open other catalogs, but these are old and are of no use to me. I have also deleted my preferences, but to no avail.
Is there any way to repair a corrupted catalog if you can't even keep it open?
I was working on an LR5 catalog yesterday (which I unfortantely didn't back up) and today it won't open. I don't even get an error message or a repair option, all LR does, is open a small grey window. LR is leaving the lock file after I close it down, but even after deleting it and restarting the computer LR won't open the catalog (which is on an external harddrive).
View 1 Replies View RelatedBasically I can only open some of my catalogs in Lightroom, Lightroom just hangs with nothing on the screen and I have to force quit it.
Yesterday I installed the lightroom plugin 'Jeffrey Friedl's Eport to Flickr'
I am using Lightroom 4.4
I've used LR since 2.0 and upgraded easily each time. I've purchased and loaded 5.3. Clicking on LR5 icon from desktop brings up message that my catalog named "xxx".
Lightroom will create a new catalog file in the destination indicated below. The previews will also be moved to this location and converted for use in LR 5.
I click "UPGRADE" and after a few hours of watching the little green line progress across the monitor nothing works" I've done this twice and rebooted the PC.
For the past 2 months, I have been working on images in LR 4.2. As of this morning, I am unable to open my LRCAT file. The error screen tells me the requested catalog is being used by another LR program. HUH? I have opened my Task Manager (windows 7) and nothing is running. I don't want to loose all the work on the images I have done up to this point.
View 3 Replies View Related