I just built a new PC and re-installed lightroom 2.0. I downloaded the upgrade to 2.7 (which was free) and tried to import my catalogs. My 2010 catalog is fine, but my 2011 catalog says it is "too new for this version of lightroom". I never had version 3 so i dont know why it's saying my catalog is too new.
View 1 RepliesI am using Lightroom 5 now. In the earlier version, I was able to create catalog & save them in external HDD. Similarly I could open any catalog from external HDD with the lrcat file extension.
However, in the current version, it does not allow me to create catalog nor retrieve catalog from external HDD. This means that I have to either transfer all the raw files to the HDD from the external HDD and then create the catalog in the laptop. After finishing all the editing, then copy and transfer everything back to the external HDD. I cannot imagine if whenever I have to edit something, I have to keep doing transfer between the laptop HDD & external HDD.
I just cloned my hard disk (named PI) to a new one named TAU. Now they both contain my enormous catalog of 800 GB of Lightroom catalog and files.
I removed my initial hard disk PI and put it in a safe location (just saying this so you know I have a backup)
I start Lightroom 5 and open the ircat file on TAU but all the pictures have an ! meaning they are missing (but the pictures are all there). How do I get Lightroom to recognize the new location?
In my catalog settings the path correctly points to the new hard drive and the folder where the photos and catalog are located, however within the application there is no way to navigate among the files and folders of my collection as there was before.
Since upgrading to LR4, I've not figured how to upgrade my catalog to LR4 also - currently it's labelled as 'Lightroom 2 catalog-2.lrcat". I'm slowly working through updating changes to 'render to LR4' but I'm uncertain if this will then automatically turn the catalog to LR4, or if I need to do this separately - and when?
View 1 Replies View RelatedI noticed a problem with LR5.2. When creating a catalog for travel with dynamic image rendering, if you want to add some pictures in this catalog it doesn't recognize the existing images, so we have the exact same selection between "all images' and "new images". I made a few tests and with a normal catalog there is no problems but apparently the dynamic images are not recognized as existing images.
View 7 Replies View RelatedI installed my upgrade to LR5 last night but it keeps giving me an error when I try to upgrade my LR4 catalog. It goes through the initial steps, stays at "preparing new searchable data" for a long time, then eventually stops and pops up the error message: "Unable to upgrade catalog. Lightroom encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of Lightroom". I tried upgrading a smaller catalog that I don't use anymore and it worked fine. how I can get this catalog converted? Its my main catalog with all of my current years' images. For the time being LR 4 is working fine but I'd love to get 5 up and running.
View 2 Replies View RelatedI just opened Lightroom and was prompted to do an upgrade (4.3) now my catalogs are all gone. How can I get them back?
View 2 Replies View Related I have trial versions of both Photoshop Elements 12 and Lightroom 5.2 (trial licenses are both still active (i.e. not expired)). I'm looking to import my PSE12 catalog into Lightroom before I plunk down the money to buy it.
I cannot, however, locate the "File->Upgrade Photoshop Elements Catalog" option in LR5.
I may have originally installed LR 5 before installing PSE 12. So I uninstalled LR5 and reinstalled it. Still no luck - the option isn't there. Any other ways to force LR5 to look for the PSE 12 catalog? Will LR5 even recognize a PSE12 catalog?
Upgraded to 3.6 today. Published services Publish to Photoshelter (URL...) doesn't work. First I get: Your catalog must be updated before it can be used with the following plug-in:
and then: Could not upgrade your catalog for plug-in metadata.The plugin-specific metadata in this catalog is newer than the what the installed version of this plugin supports. That's a deal-breaker for me, unless there's a way around it.
I recently purchased a new computer, and I need to transfer my existing Lightroom (3.6) catalog to the new machine. I have installed Lightroom on the new machine, and have updated it to the same version as on the old machine. All my images are on an external drive that I can move to the new computer.
Can I simply export the existing catalog, move the hard drive, and import the catalog into the new instance of Lightroom on the new computer? Obviously, I want to retain al the keywords, develop adjustments, etc., that I had in the original catalog.
I have a separate catalog of photos from a recent trip on my laptop (don't ask why I created a 2nd catalog - won't do that again). I want to transfer them to our desktop, which is a mac (the laptop is pc). Following instructions in a tim grey email, I used "export catalog" to transfer to an external hard drive, with intent to then import to the mac. I did check for it to export negative files. It took forever, but froze partway through the process. So I created a new folder to export into, and tried it again. It got much further that time but froze again. When I use lightroom to access the files that did transfer, I find the folders labelled as they are on the laptop, but when I open them, the application says, "no items match your search", although it does indicate there are i.e. 47 MG in the file. I can use picasa to view the files, both the jpeg's and the raw files, so they're in there.
View 4 Replies View RelatedLightroom 4 catalog does not recognize photos when external hard drive switched to a different USB port. The photos are in My Photopraphs in an external hard drive. I recently had to switch ports and now the catalog can't find the photos.
View 4 Replies View Relatedlongtime lightroom user mac 10.7.5 upgraded to 4.4 and now cannot import to designated catalog on external 4TB drive with good permissions on the drive and folders.am able to import to other drives, but not the one I mentioned?
View 3 Replies View RelatedInstalled lightroom 4.4. Crashes every time I try to upgrade my PE11 catalog.
View 3 Replies View RelatedI have an old computer running LR 3.6. I have downloaded, installed and entered my serial number for LR 4.4 on my new computer. Can I simply copy my 3.6 catalog to the new computer and open it with LR 4.4?
View 1 Replies View RelatedI have LR installed on my MacPro and the Mac just died (graphics card issues). I'm going to just buy a new Mac, though I'm trying to figure out the best way to access everything in LR until then. All of the images and photos are stored on a separate internal drive that I can take out and access via a docking station.
1. Does the license for LR allow me to install a 2nd copy on my Mac notebook?
2. If I place a copy of the LR catalog file on my Mac notebook and plug the photos/videos drive into a docking station connected to my notebook, will everything open up?
I have a Mac Pro and just bought an iMac.
On my Mac Pro, the LR catalog is on the boot drive. The photos are on a separate internal drive.
My plan is to copy both the photos and the LR catalog to the 3 TB Fusion drive of the iMac.
Would I then just double-click on the catalog to open it, and use this process to "reconnect" the missing photo files?
I recently had a computer crash and want to migrate my photos and changes from my old hard drive into my newly installed Lightroom software on the new computer. I recovered the old drive, and accessed it from my new computer. I found the most recent Lightroom catalog and imported it. Then I imported all of my photos into Lightroom. The problem is that the catalog and the photos don't seem to be talking to each other. In the catalog, the photos are there all bunched together, no folders separating by date. In the photo folders that ARE separated by date, the original photos are there as they were first imported (RAW files), but don't have the develop changes that I made to them. How can I get these two things to link up?
View 2 Replies View RelatedMy problem is that when I'm importing photos from my folders on the computer to my catalog in Lightroom 4, Lightroom doesn't import all photos from my folders. It imports the first 3-4 photos rom my folder.
View 1 Replies View RelatedSomething went wront on an ingest of my images. I think I tried correcting it by going into my /workingfiles folder were they were stored and deleting them manually. I'm sure I checked to see if I could do it through Lightroom, but maybe I missed the folder they were put in. I am guessing that is what happened so Lightroom still has a small image of them somewhere and will no longer let me re-import them.
Image Ingester Pro 3
Lightroom 4.3
Windows 7 Home Premium 64
Have new computer 64 bit with dual drives (C: 111GB, E:1.36 TB) . C. drive operates Win 7. Do I install CS 6 and LR4.1 program on E drive along with catalog including phtos? or put CS^ and LR on C: and catalog and pictures on E:
View 2 Replies View RelatedI have a downloaded version of of Photoshop CS5.1, which was a special upgrade offer for users of PSE. I have installed PSE 7.0 on my new machine successfully. I also have the folder "Photoshop CS5 Installers" (from my old computer).
I have a file with the serial number of my CS5.1. If I run the file "Photoshop_12_1_LS1.exe" (with the file "Photoshop_12_1_LS1.7z" in the same folder) will this re-install Photoshop CS5.1 on my new computer? My old machine was running Vista Home Premium SP2 (32-bit) and the new one is running Windows 7 Professional SP1 (64-bit). I don't want to try anything without really knowing what I'm doing for fear of messing things up.
I recently obtained a Dell Dimension 4600 to replace my Dimension b110. The 4600 is equipped with a Pentium 4 and a nVidia GeForce4 MX 440 (driver ver. 5.6.7.3), and runs Windows XP Professional SP2; my monitor is a Sharp LL-T19D1-B, connected via analog. Instead of reinstalling my things, I migrated my old HD to the new machine and installed the relevant drivers (plus a new monitor driver.)
Since then, I've noticed that everything I open in Photoshop is yellow-tinted, as is the Color Picker. I ran Adobe Gamma, set the white point to 6500 degrees K for Hardware and "Same as Hardware" for Adjusted, and was prompted to save an .icm, which I did - but Photoshop still had the yellowing. I also tried adjusting individual R/G/B gammas, but doing so changed the color balance of my entire display, with Photoshop remaining yellower in tint than everything else on my system, so I ultimately left the individual gammas alone.
Short of running proofed to Monitor RGB (which wouldn't help with the Color Picker,) how can I restore Photoshop to normal coloration?
I am upgrading to PSE 12 from V9. Version 12 does not locate/recognize my catalog from version 9. In version 9, it states that it is using catalog 3 (current). How to I get V12 to locate and import my version 9 catalog.
View 1 Replies View RelatedBecause the new Building Suite Design programs won't run on windows vista, I've been upgrading some of our older computers to windows 7. Most are working fine but having problems with one computer.
Specs of this computer (it's pretty old I know)
Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz (4 CPUs), ~2.5GHz
Asus P5K SE/EPU
NVIDIA Quadro FX 570
8gb ram
So I formatted this computer and installed windows 7 64x pro, installed all the software etc. This computer is also part of a domain. Problem now is opening some AutoCAD files on the server, edit the file then hit the x in the corner to close it, we hit yes to save it then the whole computer just freezes. It doesn't happen with all files, just some and I can't work out what the problem is. ALSO when copying some CAD files from one project folder on the server to another project folder on the server it freezes. No problems copying files to the local computer/desktop, just server-server. The graphics card driver is up to date etc.
Im currently in my second year at architecture school and have recently been learning how to render and do simple animations on autodesk. Being a poor student and only having an existing home computer, how to update my system so I would be able to run some simple renders on my computer?
I have attached an image below of my system details. My computer doesnt have a graphics card and I know I need to get that sorted.
Just got a new Windows 8 (64 bit) machine, actually 8.1 now. Installed PSE 9, but I cannot open my catalog. It opens fine on my old XP machine.
View 3 Replies View RelatedCan I upgrade my PSE 5.0 Catalog directly to version 12.0 without loss of data (i.e. using backup-move-restore method)? the transition to 6.0 and also to 9.0 resulted in a different data format in the catalog file.
View 1 Replies View RelatedI have installed Adobe Photoshop Elements 11 on my new Windows 7 computer. How do I transfer the versin 5.02 catalog from my old Vista computer to my new computer?
View 2 Replies View Relatedi have just bought a new computer with windows 8 and installed elements version 12; my old laptop had elements version 8 on it and I did a full backup of the catalog to an external hard drive. I have gone through the restore catalog process but cant see any photos either in the organiser or in my pictures. I did the convert step but it said it conversion failed and suggested repairing the backup with previous version which is not possible as the computer was a work machine which has now been wiped and rebuilt and I dont have version 8 anymore!! when it did the convert step it only seemed to find breeze files.
View 5 Replies View RelatedPSA 9 : How to transfer the catalog to a new computer? Where is the catalog located?
View 3 Replies View Related