Photoshop :: CS2 9.0 - Color- After Computer Upgrade
Nov 17, 2007
I recently obtained a Dell Dimension 4600 to replace my Dimension b110. The 4600 is equipped with a Pentium 4 and a nVidia GeForce4 MX 440 (driver ver. 5.6.7.3), and runs Windows XP Professional SP2; my monitor is a Sharp LL-T19D1-B, connected via analog. Instead of reinstalling my things, I migrated my old HD to the new machine and installed the relevant drivers (plus a new monitor driver.)
Since then, I've noticed that everything I open in Photoshop is yellow-tinted, as is the Color Picker. I ran Adobe Gamma, set the white point to 6500 degrees K for Hardware and "Same as Hardware" for Adjusted, and was prompted to save an .icm, which I did - but Photoshop still had the yellowing. I also tried adjusting individual R/G/B gammas, but doing so changed the color balance of my entire display, with Photoshop remaining yellower in tint than everything else on my system, so I ultimately left the individual gammas alone.
Short of running proofed to Monitor RGB (which wouldn't help with the Color Picker,) how can I restore Photoshop to normal coloration?
View 5 Replies
ADVERTISEMENT
Apr 26, 2012
I have a downloaded version of of Photoshop CS5.1, which was a special upgrade offer for users of PSE. I have installed PSE 7.0 on my new machine successfully. I also have the folder "Photoshop CS5 Installers" (from my old computer).
I have a file with the serial number of my CS5.1. If I run the file "Photoshop_12_1_LS1.exe" (with the file "Photoshop_12_1_LS1.7z" in the same folder) will this re-install Photoshop CS5.1 on my new computer? My old machine was running Vista Home Premium SP2 (32-bit) and the new one is running Windows 7 Professional SP1 (64-bit). I don't want to try anything without really knowing what I'm doing for fear of messing things up.
View 5 Replies
View Related
Nov 27, 2011
I just built a new PC and re-installed lightroom 2.0. I downloaded the upgrade to 2.7 (which was free) and tried to import my catalogs. My 2010 catalog is fine, but my 2011 catalog says it is "too new for this version of lightroom". I never had version 3 so i dont know why it's saying my catalog is too new.
View 1 Replies
View Related
May 14, 2013
Because the new Building Suite Design programs won't run on windows vista, I've been upgrading some of our older computers to windows 7. Â Most are working fine but having problems with one computer. Â
Specs of this computer (it's pretty old I know)
Intel(R) Core(TM)2 Quad  CPU  Q9300  @ 2.50GHz (4 CPUs), ~2.5GHz
Asus P5K SE/EPU
NVIDIA Quadro FX 570
8gb ram
So I formatted this computer and installed windows 7 64x pro, installed all the software etc. Â This computer is also part of a domain. Â Problem now is opening some AutoCAD files on the server, edit the file then hit the x in the corner to close it, we hit yes to save it then the whole computer just freezes. Â It doesn't happen with all files, just some and I can't work out what the problem is. Â ALSO when copying some CAD files from one project folder on the server to another project folder on the server it freezes. Â No problems copying files to the local computer/desktop, just server-server. The graphics card driver is up to date etc.
View 2 Replies
View Related
Mar 27, 2012
Im currently in my second year at architecture school and have recently been learning how to render and do simple animations on autodesk. Being a poor student and only having an existing home computer, how to update my system so I would be able to run some simple renders on my computer?
I have attached an image below of my system details. My computer doesnt have a graphics card and I know I need to get that sorted.
View 2 Replies
View Related
Aug 12, 2008
I am using PS 8 on a Powerbook G4, with other apps such as InDesign CS and i-photo, sometimes printing from a B/W laser printer and doing color with an Epson Stylus Photo RX 600, also scanning from the Epson and photos from two different brands of digital cameras (Casio pocket camera and Olympus standard size).
Color management is a PAIN in the patoot. Every different project demands figuring out a different workflow for color management.
Is color management improved by (easier with) later versions of PhotoShop and/or InDesign? That would be my only reason to upgrade, but if it works I would do it. The printer does fantastic work WHEN I GET THE WORKFLOW RIGHT for the particular project.
View 1 Replies
View Related
Jul 31, 2008
I'm using Mac 10.4.11, PhotoShop 8, Epson Stylus Photo RX600 (and InDesign CS v3.1). The printer can do beautiful work when it all works together, but that is rare.
Will upgrading PhotoShop provide smoother color management tools? Other than that I have no problems with my configuration?
View 1 Replies
View Related
Jul 3, 2012
I am using PS CS6 on my win7 computer. This is my issue: I want to change the blue color of this button[URL]...to this green color([URL].... I want to have the color exactly the same. So
Â
1. I open the green color button, in Image->Adjustments->Replace color, I got the property of the color, which is: H:110 S:62 B:73 R:90 G:186 B:71, L:68 a:-46 b:48 C:67 M:0 Y:99 K:0 #5aba47, I wrote down these values,
2. I open the blue color button, in Image->Adjustments->Replace color, replacement->result, I input all the values of green color, and I save the file. They are all png format.
3. I open the one I just made[URL]... I found the value is different from what I have input, the value was changed to H:110 S:60 B:72 R:91 G:183 B:71, L:67 a:-44 b:46 C:68 M Y:99 K:0 #5bb749
Â
So why this happened(value changed)? And if I want to make the color of two buttons EXACTLY the same, is there any way I can do it in PS?
View 14 Replies
View Related
Dec 19, 2012
I have the AutoCad Map 2009 (32bit) with Windows XP on one Computer and uploaded AutoCad LT 2011 (64bit) in Windows 7 (64bit) on a second Computer. The Files could not be migrated (not the same Program and Operating systems) In Release 11 all my Reference File colors are now faded in Model and Paper Space. What do I have to change so that it looks like in Map 2009?
View 2 Replies
View Related
Oct 28, 2013
I have CS5 installed on a desktop computer that crashed and I can't get it working to deactivate CS5. I am going to purchase a new desktop and would like to install CS5 on the new computer, but it was already installed on two computers (desktop and laptop) so no activations are left. I have the Disk and serial number.
View 1 Replies
View Related
Mar 15, 2014
I started a new computer with LR5, and it runs fine. But, when I imported my pics from a previous computer running LR4, all the pics loaded into the new LR without any tags or processing. How can I get that info without having ot reprocess thousands of pictures?
View 1 Replies
View Related
Feb 21, 2012
nstall of CS2 on my Win7 64bit machine and in the process I find that CS2 is no longer supported, (no big surprise,) and CS2 may have issues with 64bit.Â
Â
I only really use Photoshop, so I'm thinking maybe I should look at why I should or shouldn't upgrade. (Amazon has the upgrade @ $153.xx USD or something like that at the moment.)
Â
I do original art, inputting drawings and manipulating them in Photoshop, as well as working with digi photos. Worth the upgrade?What's new that I should be aware of?Â
View 8 Replies
View Related
Oct 21, 2013
I have CS3 and ultimately want to upgrade. In the short term, I need to deactivate the computers that previously had CS3 on them. I don't even have the computers anymore. I will then just reload my existing copy of CS3, get it re-established and move on from there. What is the simple way to do this?Â
View 7 Replies
View Related
May 18, 2013
I have a Photoshop CS3 license that I have not used in a while. Now I'm finding out that I may have neglected it too long, what with this "cloud" bidness. Can I upgrade this license to CS6? If so, where and how? Or am I stuck with buying the full install?
View 6 Replies
View Related
May 28, 2013
Upgrading to ACR 7.4 via help>upgrades in PS CS6 does not work. I get message the everything is up to date, but when I check the version of ACR, it still shows 7.3
View 4 Replies
View Related
May 22, 2013
I have Photoshop CS5 and want to upgrade to CS6. However, I don't want the Creative Cloud version. (I don't want to have to pay a monthly or annual fee!) I want to pay the one-time "lifetime" license fee. Where do I go to do this? How much will it cost? Or is this no longer an option?
View 31 Replies
View Related
Sep 12, 2012
Can I upgrade from CS to CS6...CS doesn't run on new Mac OS.
View 3 Replies
View Related
Nov 6, 2012
Can you upgrade from CS4 to CS6 Extended ?
View 1 Replies
View Related
Jun 14, 2012
I have upgraded from CS5 to CS6. Do I need to uninstall CS5? When I right-click on a file, the "Open With" options have only CS5.1 and not CS6.
View 1 Replies
View Related
May 11, 2013
I use both Illustrator CS4 and Photoshop CS4 for my occasional, personal use. I am running OSX 10.5.8. (Yes, I know both are ancient). I have just purchased a new Mac running 10.9. I would like to put both my ai and ps CS4 on my new machine.
Note: I am willing to purchase new software and/or upgrades, however I am not willing to purchase cloud-based software at a monthly charge. Again, what are my options for installing ai and ps on my new machine?
View 3 Replies
View Related
Jun 17, 2012
I have just purchased the latest Photoshop Cs6 but I wasn't aware that there was another program. Photoshop elements that also included 3D. I have tried to upgrade to the 3D package but the trial download for elements is the same as the Photoshop CS6 version I already have so I can't get it to work.
How to upgrade to get the 3D to work.
View 3 Replies
View Related
Sep 6, 2013
I have adobe Photoshop cs5 and want to upgrade to cs6. I do not want to move to your cloud services, so how do I go about upgrading? I wouldn't think I should have to pay for CS6; usually upgrades have some sort of discount.
View 1 Replies
View Related
Aug 6, 2009
to replace my old version of PS but Adobe doesn't offer an upgrade discount and I couldn't find any version requirements anywhere on their site, so I don't know if the CS4 upgrade will even work with my old 7.0,
View 1 Replies
View Related
Jul 20, 2008
I currently have the photoshop elements 6/premiere elements 4 bundle and am thinking about upgrading to CS3. Issue is that I quite like integrated organiser/editor in PE6 and that Premiere elements is able to view and pull out photos from the PE6 organiser.
Am I right in thinking that if I upgrade to CS3, it will not be integrated into the organiser any longer?
Does that mean I would have to get lightroom as well? And presumably that still won't talk to Premiere elements?
View 2 Replies
View Related
Jul 28, 2009
e I've considered upgrading Photoshop on my computer (I like what I have, and hadn't really felt the need or desire to upgrade), and since that time, a lot has changed. Because of my lack of desire to keep track of the latest changes, I find myself extremely confused now that I am actually looking to upgrade, which is the reason for posting this. The general idea is that I'm currently using Photoshop 7, and when last I peeked in on Photoshop, that was as straight-forward as it needed to be. 7.0 was Photoshop, that's it. Now what's confusing me is what would be the best version to upgrade to? The obvious questions to follow -- what do I need it for? Varied. I do some web design, I do some photo touchups, and I do other aspects, such as getting ready to start production on an ezine (this is the primary reason I'm considering an upgrade, as I don't feel Photoshop 7 provides everything that I need to do that), for which I'd like to design a simple spread. What gets me is what all these new variations of Photoshop actually are, and what route should I be looking to go so that it's still the Photoshop I know and love, but upgraded and with the various improvements and such? I realise that might sound vague, but essentially I don't want to have to learn a whole new product just to enjoy the features that I already enjoy and know how to utilize,
View 2 Replies
View Related
Oct 24, 2008
I am trying to re-install an upgrade from Photoshop 5.0 to CS2 after hard disk failure. I called Adobe Customer Service who tried to help by having me rename the instmsia file in CS2 but it didn't work and they referred me here. Does anyone remember how to make the upgrade install? When I put in the cd for CS2 it says that you need Photoshop 5.5 in order to install CS2. I know there is some extra step you have to go through to go from 5.0 to CS2 because I went through it 3 years ago when I first installed CS2.
View 2 Replies
View Related
Apr 29, 2009
I purchased a sealed legal version of Photoshop CS3. A few months later I purchased a sealed legal upgrade to CS4. Today I installed CS3 on the new computer, smooth installation and activation. Upon opening the application, I found I had somehow purchased CS3 Extended, which I don't even want. I then tried to install the upgrade to CS4 (not extended) and the serial number for CS3 was not recognized. I know there is some issue with the upgrading to a normal version from an extended one. How to procede? I searched the knowledge base but it only says that you can upgrade in this way if contact the Adobe Store (if purchasing from Adobe), I did not purchase these from Adobe.
View 1 Replies
View Related
May 30, 2007
I've loaded up Photoshop 7.0 (upgrade from 5.0). I never used it and I am feeling lost.
I've played with making changes to pictures. I get that. I've played with the blending options and gradients. I think I've got the idea of layers down.
But, I don't know how to make just a circle image... or grab something from one image to use on another one. For instance, if I make a button and I save it. It ends up being saved as a square... so that there is white background behind the circular button. How can I just save the circle?
I wanted to cut the head of a flower out of one picture and put it on another picture.
How do I do that? I have found several tutorials on making buttons and doing some graphics... but I can't seem to find a tutorial that will show me how to cut out shapes and reuse them or save images that aren't square.
View 5 Replies
View Related
May 29, 2003
I try to install the 7.0.1 upgrade to PS7.0, it can't find "photoshop" even if I point it to the correct directory. The net result is that I can't install it.
View 14 Replies
View Related
Mar 1, 2008
upgrading from CS2 to CS3 by downloading a trial version first.
However, once installed and if I decide not to buy,
how do I go back to CS2?
Just uninstall the upgrade?
I use Windows XP SP2.
View 2 Replies
View Related
Oct 5, 2008
Is it possible to add the CS4 upgrade to CS3 Extended? I am not really sure that I need what comes with the extended version.
View 16 Replies
View Related
