When I zoom in with the scroll wheel, the zoom is relative to location of the cursor. However, when I zoom out using the scroll wheel, it automatically zooms out relative to the center of the canvas. Is there a shortcut key or a setting that will allow for when you zoom out to be centered on the location of your mouse, rather than the center of the canvas?
View 6 RepliesZoom in so much that the image is bigger than the screen and then navigate somewhere near the edges of the image. Then zoom out again. When the image is the size of the screen, Photoshop centers it annoyingly. In short, it's not possible to move the photo on the screen when it fits the screen, only when it's zoomed in a bit.
Reasons of moving a fitting image on the screen can be for example that the screen is big and you want to get a certain edge of the image at the top of the screen... or near the tools, who knows.
Really annoying anyway and the option "Resize windows when zooming" doesn't affect this behaviour.
What happened to using the mouse wheel to zoom & unzoom on the cursor? It will zoom and unzoom, but without regard to the cursor location. I want it back?!
View 11 Replies View RelatedCursor get very jumpy when i zoom in close to things to measure or move.
View 1 Replies View RelatedWhy did my cursor turn into a zoom tool with a photo sized to Fit; and how can I make it go back to a normal arrow?
It is only happening when the photo is sized to Fit. At other sizes, the cursor is normal.
This just started after I finished using the Adjustment Brush. I had used Cntrl + to zoom a photo while using the Adjustment Brush.
I use Photoshop CS2 to create Designs for webpages. These designs have pixel-exact elements, e.g. a 1-pixel-line from top to bottom.
Now when I zoom in (>100, then I have sort of anti-alias, so that the 1-pixel-line isn't only one blue anymore, but it has different blue tones. I guess for photo manipulations etc. this anti-aliasing zoom is great, but for webdesign it sucks because I don't know if only the zoom make the line "corrupt" or if it really is corrupt.
Is there a way to change this zoom?
I'm recording an action and want the text to be centred horizontally. It just won't do it. Pressing the paragraph buttons shjoot the text off the side and seems to be based on where you intially type the text in the first place. This must be the simplest thing on PS why won't the text just jump to the middle of the photo?
Secondly I'm drawing a selection around the text (then filling with black). There seems to be no way to centralise a selection box either. As when I run the action on different sized photos the box and text end up in completely different places, separately. Why is this and how can I centralise a selection too?
recently my zoom tool changed from default zoom in + to zoom out -
View 1 Replies View RelatedWhy is my image not centered when I print? I have set everything correctly, but the end result is always an image that is pushed off the page. I thought it was my old printer, but I just got a new one, and it is happening with this one, too.
View 1 Replies View RelatedI'm working on a 960 grid layout, with all the vertical guides showing the grid.
I want to increase my canvas width from 960 to 1200, keeping the artwork centred, so in the canvas size dialog box I select the center anchor. Unfortunately this keeps the artwork centred but the guides always move left, as if they're anchored to the left of the canvas. This means the guides are no longer in position.
Is there any way to add more canvas to both sides while keeping the guides where they are relative to the artwork?
The AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
My cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedMy keyboard has a zoom key with + and - selections. I use to use this key in drawings to zoom in and out when in the AutoCAD application when we had Windows XP. Now that I have Windows 7 I can't do this. I can't find out how to assign this key on the Microsoft Keyboard interactive software either. I have the other keys assigned as desired.
Can I still use my keyboard zoom key to zoom in and out in drawings? If so, how do I set this up in AutoCAD, or do I need to do this through a Microsoft keyboard application?
I am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
View 9 Replies View RelatedI have owned Photoshop CS3 and CS5. I have used these products across 3 different computers, OSX and Windows in several different versions. I have used 4 or 5 different printers and each and every time my images print offset to the left of the page with about an 1 inch blank space down the right edge of the page. Portrait or Landscape, it makes no difference. I have tweaked the settings in Photoshop and the operating system and printer settings endlessly, all to no avail.why Photoshop isn't capable of printing an image centered on the page or borderless. I am currently using Windows 8.1 beta, an Intel i5 based system, a Canon MG6220 printer with Photoshop 5.1 64 and 32 bit.
View 1 Replies View RelatedI can't find in new max (2013) settings for zoom. I want to set Zoom about mouse pointer and adjust a bit zoom speed (now it is too much for one mouse wheel step).
I can't find zoom settings in 3ds max 2013. Where they are? I think that in previous max it was in Customize -> Viewports tab. But now it is not there.
I have a block that is being inserted to my drawing via my .net program. The problem I am having is my attributes are centered, but the content coming from .net is not. If I change the attribute value in AutoCAD after the fact it goes back to being centered.
View 5 Replies View Relatedi have a picture of a person and i moved the person from the original picture and background into another background. when i imported the second background and put the two together, the person was in the new background but they both were up in the left hand corner of the screen and very small. i've tried everything i know to get them back into the middle of the screen but no luck. i'm sure i must have clicked on some button that i shouldn't have but i can not for the life of me figure out what it was. i can not go forward with pdn as long as this problem exists and the work i have to do is standing still instead of progressing.
View 3 Replies View RelatedHow to draw a perfect circle and how to make sure it is perfectly centered inside a square in Photoshop elements using the Ellipse option.
View 2 Replies View RelatedIn Xcode, we have to define cursor as:
resource 'CURS' (16001) {
$"00 00 00 00"
$"18 00 3C 00"
$"1E 00 0F 00"
$"07 80 03 C8"
$"01 E8 00 FC"
[Code]...
In Windows we use .cur file, simpler.
I want to convert .cur file to the mac format above, how?
My routine inserts in modelspace different blocks with attributes in it with justification "Center".After the blocks are inserted and the attributes are filled, it all looks good in Autocad.Then I want to plot the DWG.
The problem is that the centered attributes in the plot are then justified to "Left" ?When I run my routine the second time in the same drawing then it goes well.It looks like the attributes or blockreference isn't updated well in the database after insert?
public static BlockReference InsertBlockReference(Database database, string filename, string blockname, Point3d
insertionpoint, Scale3d scalefactor)
{
using (DocumentLock documentLock = Active.Document.LockDocument())
{
using (Transaction transaction = database.TransactionManager.StartTransaction())
[code]..
I like to print 12 x 18 on 13 x 19 but a3 13 x 19 allows only 12.95 width. If I select my custom template 13 x 19 with .5 border it tells me i must use front loading, occasionally it has let me but most of the time i must print 11.95 x 18 making photos a little off center?
I am unable to perfectly center because print driver on canon pixma pro mk2 gives only a3 13 x 19 with a border, yet it takes 13 x 19 with driver setting.
When I print 8x10s in Lightroom 4, they are not centered even though the box labeled center is checked. Strangely, I do not have this problem printing 11x14 or 4x6.
View 4 Replies View RelatedThere ought to be a way to do this, but I don't see how: I record forums, and the presenter frequently wanders back and forth across the stage. I can use the motion tracker to track his wanderings (since the camera is set to a fairly wide angle). What I want to do with the motion tracking information is have the presenter's clip pan back and forth as he walks forth and back - with the net result that he stays in the center of the screen. (I'd use a zoomed portion of the image so that there would be enough to fill the frame.
Is there a way to do this? It would make forum recording so much easier.
Text> Paragraph >Full justify. Can one make the last line centered instead of flush left?
View 4 Replies View RelatedHow can i draw a two centered curve in civil 3d?
View 9 Replies View RelatedIn AutoCAD LT 2013, whenever I open a drawing I previously created and stored, it opens with a small amout of the bottom of the drawing below the bottom border of the window. Repeatedly I have tried positioning the drawing the way I would like it to open then saving that configuration. That's how I always did it in AutoCAD 2000, my previous version. Regardless how many times I go thru that process, all drawings always open centered horiz'ly but with the bottom bit of the drawing below the bottom border of the window.
I constantly look for a "Center Drawing In Window" button, or "Save Current View" button and so far have found nothing I recognize as such or even close. Am I looking for something that doesn't exist? Am I not understanding how it works? In the grand scheme it really doesn't matter because it's simple to pan the drawing into a fully readable scene - but I am still curious.
I am having trouble trying to add text to a dynamic block that will stay locked and centered when I stretch it left/right and up/down. The default text I am looking to have should be 36x24 (36 is the lenght of the unit, 24 is the depth). I can also upload my block.
View 7 Replies View RelatedThe circle tool, in the standard paint.net tool set, anchors the a circle at the corners of the circle's "bounding box".
So when you want to draw a circle around a certain point - you have to center the circle yourself
I want to have the circles anchored to the point that I start the drag (centered at the point I hold down the mouse to start the drag).
If you imagine wanting to drawn a target (concentric circles) - you'll get the idea.
I cannot see a way to do this automatically in paint.net.
Before I flame off on this crap CC version of ID: Why isn't my art centered when I resize my document? I have the center box selected at the upper left as I always do but as soon as I change the page size, the orientation is top left and all the art is hanging to the right and below my new page size. I'm not doing photo retouching. I can't read any of my menus.
View 31 Replies View Related