Why is my image not centered when I print? I have set everything correctly, but the end result is always an image that is pushed off the page. I thought it was my old printer, but I just got a new one, and it is happening with this one, too.
View 1 RepliesWhen I print 8x10s in Lightroom 4, they are not centered even though the box labeled center is checked. Strangely, I do not have this problem printing 11x14 or 4x6.
View 4 Replies View RelatedZoom in so much that the image is bigger than the screen and then navigate somewhere near the edges of the image. Then zoom out again. When the image is the size of the screen, Photoshop centers it annoyingly. In short, it's not possible to move the photo on the screen when it fits the screen, only when it's zoomed in a bit.
Reasons of moving a fitting image on the screen can be for example that the screen is big and you want to get a certain edge of the image at the top of the screen... or near the tools, who knows.
Really annoying anyway and the option "Resize windows when zooming" doesn't affect this behaviour.
I have owned Photoshop CS3 and CS5. I have used these products across 3 different computers, OSX and Windows in several different versions. I have used 4 or 5 different printers and each and every time my images print offset to the left of the page with about an 1 inch blank space down the right edge of the page. Portrait or Landscape, it makes no difference. I have tweaked the settings in Photoshop and the operating system and printer settings endlessly, all to no avail.why Photoshop isn't capable of printing an image centered on the page or borderless. I am currently using Windows 8.1 beta, an Intel i5 based system, a Canon MG6220 printer with Photoshop 5.1 64 and 32 bit.
View 1 Replies View RelatedI'm trying to centre an image to the centre of the browser using the responsive settings. My problem is that I can centre the image, but as soon as I start to scale upwards or downwards the Logo isn't staying in the middle of the browser.
View 2 Replies View RelatedUsing WD7 Tweaks,How do I create a 2048 background image Centered and no repeating? If i remember correctly, the tweak is placed over the corner of the background page
Which layer should the Tweak be placed? this code is working but makes the image forced right.or is the new way to copy the code and place in the: Placeholder>HTML code [head]
How to make a centered background scaled image/video in Edge Animate. Can't code, so I'm trying to use the properties panels.
1. Have the image centered in the middle of the stage
2. Have it scale to fill the screen always so there are no black bars (ie, I want a stage with only picture on it)
[URL]...
(This project is only aimed for iPad and above - desktop, so don't need mobile resolutions)
My work around is to do this via manual CSS, but there has to be a better way to keep it within the Edge compositiion
I also tried to import this Edge stage into Reflow after seeing this demo [URL]...
but just got blank screens : [URL].....
(I do like Reflow's ability to target specific resolutions but I don't quite need it for this project).
When I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies View RelatedWas printing 4x6" from LR 5.3 fine. To an Epson 3880. Then went to Page Settings (MAC) changed paper size to 8.5x11". The preview responded with a larger page. I scaled the image up to 8x10 via lightroom cell size. But when I printed to the Letter size paper, LR printed only a close to 4x6" top left corner. This was not a full image like the 4x6. It was just a corner.
Exported to PS and printed fine.Can not figure why the print will not print the full image?
I'm recording an action and want the text to be centred horizontally. It just won't do it. Pressing the paragraph buttons shjoot the text off the side and seems to be based on where you intially type the text in the first place. This must be the simplest thing on PS why won't the text just jump to the middle of the photo?
Secondly I'm drawing a selection around the text (then filling with black). There seems to be no way to centralise a selection box either. As when I run the action on different sized photos the box and text end up in completely different places, separately. Why is this and how can I centralise a selection too?
When I zoom in with the scroll wheel, the zoom is relative to location of the cursor. However, when I zoom out using the scroll wheel, it automatically zooms out relative to the center of the canvas. Is there a shortcut key or a setting that will allow for when you zoom out to be centered on the location of your mouse, rather than the center of the canvas?
View 6 Replies View RelatedI'm working on a 960 grid layout, with all the vertical guides showing the grid.
I want to increase my canvas width from 960 to 1200, keeping the artwork centred, so in the canvas size dialog box I select the center anchor. Unfortunately this keeps the artwork centred but the guides always move left, as if they're anchored to the left of the canvas. This means the guides are no longer in position.
Is there any way to add more canvas to both sides while keeping the guides where they are relative to the artwork?
I have a block that is being inserted to my drawing via my .net program. The problem I am having is my attributes are centered, but the content coming from .net is not. If I change the attribute value in AutoCAD after the fact it goes back to being centered.
View 5 Replies View Relatedi have a picture of a person and i moved the person from the original picture and background into another background. when i imported the second background and put the two together, the person was in the new background but they both were up in the left hand corner of the screen and very small. i've tried everything i know to get them back into the middle of the screen but no luck. i'm sure i must have clicked on some button that i shouldn't have but i can not for the life of me figure out what it was. i can not go forward with pdn as long as this problem exists and the work i have to do is standing still instead of progressing.
View 3 Replies View RelatedHow to draw a perfect circle and how to make sure it is perfectly centered inside a square in Photoshop elements using the Ellipse option.
View 2 Replies View RelatedMy routine inserts in modelspace different blocks with attributes in it with justification "Center".After the blocks are inserted and the attributes are filled, it all looks good in Autocad.Then I want to plot the DWG.
The problem is that the centered attributes in the plot are then justified to "Left" ?When I run my routine the second time in the same drawing then it goes well.It looks like the attributes or blockreference isn't updated well in the database after insert?
public static BlockReference InsertBlockReference(Database database, string filename, string blockname, Point3d
insertionpoint, Scale3d scalefactor)
{
using (DocumentLock documentLock = Active.Document.LockDocument())
{
using (Transaction transaction = database.TransactionManager.StartTransaction())
[code]..
I like to print 12 x 18 on 13 x 19 but a3 13 x 19 allows only 12.95 width. If I select my custom template 13 x 19 with .5 border it tells me i must use front loading, occasionally it has let me but most of the time i must print 11.95 x 18 making photos a little off center?
I am unable to perfectly center because print driver on canon pixma pro mk2 gives only a3 13 x 19 with a border, yet it takes 13 x 19 with driver setting.
There ought to be a way to do this, but I don't see how: I record forums, and the presenter frequently wanders back and forth across the stage. I can use the motion tracker to track his wanderings (since the camera is set to a fairly wide angle). What I want to do with the motion tracking information is have the presenter's clip pan back and forth as he walks forth and back - with the net result that he stays in the center of the screen. (I'd use a zoomed portion of the image so that there would be enough to fill the frame.
Is there a way to do this? It would make forum recording so much easier.
Text> Paragraph >Full justify. Can one make the last line centered instead of flush left?
View 4 Replies View RelatedHow can i draw a two centered curve in civil 3d?
View 9 Replies View RelatedIn AutoCAD LT 2013, whenever I open a drawing I previously created and stored, it opens with a small amout of the bottom of the drawing below the bottom border of the window. Repeatedly I have tried positioning the drawing the way I would like it to open then saving that configuration. That's how I always did it in AutoCAD 2000, my previous version. Regardless how many times I go thru that process, all drawings always open centered horiz'ly but with the bottom bit of the drawing below the bottom border of the window.
I constantly look for a "Center Drawing In Window" button, or "Save Current View" button and so far have found nothing I recognize as such or even close. Am I looking for something that doesn't exist? Am I not understanding how it works? In the grand scheme it really doesn't matter because it's simple to pan the drawing into a fully readable scene - but I am still curious.
I am having trouble trying to add text to a dynamic block that will stay locked and centered when I stretch it left/right and up/down. The default text I am looking to have should be 36x24 (36 is the lenght of the unit, 24 is the depth). I can also upload my block.
View 7 Replies View RelatedThe circle tool, in the standard paint.net tool set, anchors the a circle at the corners of the circle's "bounding box".
So when you want to draw a circle around a certain point - you have to center the circle yourself
I want to have the circles anchored to the point that I start the drag (centered at the point I hold down the mouse to start the drag).
If you imagine wanting to drawn a target (concentric circles) - you'll get the idea.
I cannot see a way to do this automatically in paint.net.
Before I flame off on this crap CC version of ID: Why isn't my art centered when I resize my document? I have the center box selected at the upper left as I always do but as soon as I change the page size, the orientation is top left and all the art is hanging to the right and below my new page size. I'm not doing photo retouching. I can't read any of my menus.
View 31 Replies View RelatedI'd like to prepare and then print a 3d lenticular image.
View 4 Replies View RelatedI have someone who wants to make a six foot print of one of my images. Will a 50mb image be large enough? If not, they will need to enlarge on their end (UK). How big will they need to make it.?
View 3 Replies View RelatedI cannot print anything from Photoshop CS5. I always get the message: Could not print “image name” because there is not enough memory (RAM).I'm using Mac OS 10.6.8, with 8 GB RAM. I have tried setting memory usage to 100% of RAM (7379 MB for me). The "Ideal Range" is 4058-5313 MB. I cannot print anything, not even a 20 kB file because I always get that error message.
(I don't have a problem printing from any other programs, like Gimp, but I want to print from Photoshop because of they way it allows you to adjust what part of the image you print when you are cropping the image during printing.)
I want to prepare my images in PS CS6 for print. I have read several articles that TIFF files print best since they do not lose any information but sometimes you can barely see the difference from a TIFF to a JPEG. However, I have also been told by a professional wedding photographer that you should always give your clients JPEGS since it is such a universal file format. I noticed on websites like CVS photo or Shutterfly they do not even accept TIFF files.
what file settings are best when printing JPEGS?I would normally save a file as the following:
- JPEG (quality 12/baseline optimized)
- 16-bit
- 300 dpi
- 3000x the longest side
- RGB color space
However, when I use the 'Image Processor' in PS to save all of my open files as JPEGs, it always saves them as 8-bit, sRGB color space. I have have a few concerns with this..
- Do JPEGs have to be 8-bit? If so, is this ok for printing? I have heard 16-bit is best.
- Shouldn't print files be RGB color space? NOT sRGB?
- Does the dpi matter?
Is there any easy way to change the auto settings when saving as a JPEG in the 'Image Processor'? Or maybe I could create an action for saving? Although, I have tried this and it never seems to work properly.
I have a photo that I'd like to print out for 16x24.
How do I do that?
I looked at the Picture Package and the largest size is 8x10.
We are an e-commerce company and wish to do a show case of our web sites in a presentation.I have been asked to make some posters and have done some screen shots. The current dpi is 72dpi, and the printers need the highest resolution possible. How can I resize to get the highest resolution possible. I tried resizing using "Image size..." to 300 dpi, then resizing back to the original 72(to see what it would look like), but when going back to 72 dpi it blurs the screen shots. what must I do?
View 1 Replies View RelatedI am using CS2. when I print with preview and choose "any" icc profile, I see an off color image. This off color image is printed off color and not what I originally had. It is approximately 1/2 to one stop density lighter (and redder) and the shadows are cyan/blue, instead of neutral black.
If I choose Adobe RGB as the profile and print, the image is close but not correct. This is happening with CS2 and elements 6.
Of course the r1800 is set for ICM and off - no color adjustment.
I have down loaded new profiles, reinstalled my epson r1800, checked for missing files in CS2.
I am running windows XP Home, 2gig memory, dell xps. I have been using this system for over two years without a problem until now.