Paint.NET :: Circles Centered At Source Of Drag

Feb 12, 2012

The circle tool, in the standard paint.net tool set, anchors the a circle at the corners of the circle's "bounding box".

So when you want to draw a circle around a certain point - you have to center the circle yourself

I want to have the circles anchored to the point that I start the drag (centered at the point I hold down the mouse to start the drag).

If you imagine wanting to drawn a target (concentric circles) - you'll get the idea.

I cannot see a way to do this automatically in paint.net.

View 4 Replies

Premiere Pro :: When Drag Clips From Source To Timeline They Automatically Are Zoomed In

Jan 28, 2014

I zoomed in on previous clips double clicking the timeline monitor and using the four corners tool. However, now when I drag clips in, they become distorted and zoomed in. How can I reset the monitor to match the source monitor?

View 2 Replies View Related

Paint.NET :: Screen Is Not Centered

Jan 12, 2012

i have a picture of a person and i moved the person from the original picture and background into another background. when i imported the second background and put the two together, the person was in the new background but they both were up in the left hand corner of the screen and very small. i've tried everything i know to get them back into the middle of the screen but no luck. i'm sure i must have clicked on some button that i shouldn't have but i can not for the life of me figure out what it was. i can not go forward with pdn as long as this problem exists and the work i have to do is standing still instead of progressing.

View 3 Replies View Related

Paint.NET :: Circles In Hexagonal Structure

Jan 23, 2014

Is there a simple way/plugin I can use to render circles arranged in a hexagonal format?

View 3 Replies View Related

Paint.NET :: How To Designate The Size Of The Circles

Jan 14, 2012

I am trying to use the tool for drawing a filled-in circle with a colored border to add a series of circles to a map for use in identifying specific stops on a tour. I cannot, to save my life, figure out how to designate the size of the circles. Instead, the only thing I can figure out to do is use my mouse to click, hold, and drag until the pixel dimensions on the screen show exactly the size I am aiming for.

The problem is that I am trying to hit exactly 30x30 pixels. Either my hand is not steady enough or the mouse is too sensitive, but it is taking forever to try to hit precisely the right size. Is there any way to simply click the point where I would normally begin dragging to draw the circle and then just type in the dimensions on my keyboard?

View 5 Replies View Related

Paint.NET :: Resizing Photos Into Circles

Jan 31, 2011

I want to resize a photo into a circle.

View 4 Replies View Related

Paint.NET :: Source Code For TWAIN Scanning?

May 28, 2011

Is it possible to have a look at the sourcecode oft Paint? I am having trouble with a Nikon Coolscan IV Scanner. I am using at the moment twaindotnet. Do you have a better library?

View 3 Replies View Related

Paint.NET :: Family Crest - Two Concentric Circles With Text Around Circumference

Feb 1, 2013

I would like to create a family crest. I have a JPG for the center, but I need two concentric circles, with text around the circumference, between the circles.

View 2 Replies View Related

Paint Shop Pro :: Read From Source Installation Database

Dec 6, 2011

I have just purchased PaintShopPro X4 Ultimate on disk and have repeatedly a version of an installation error:

Error 1901.Error attempting to read from the source installation database: C:windowsinstaller1021ae5.msi

I've done an install of the download version and then uninstalled and repeated the disk installation: this gave the same error except a different *.msi file.This is a Windows 7 home professional X64 system and I tried it on both my own logon (nominally an 'administrator') and on the 'super administrator' mode with the same problem.

View 2 Replies View Related

Paint Shop Pro :: X4 Pen Won't Drag

Oct 29, 2011

I recently bought PSPX4 from Corel. I Installed it into my new Gateway tower. Everything works fine EXCEPT that my bamboo pen won't drag (for example when I use the erase feature or any makeover tools). I tried resetting PSPX4 to the default. I also tried opening a new administrator account, deleting the PSPX4 and reinstalling it. I went as far as reinstalling an old PSPX2. The pen now won't drag in either program. Tech support made the suggestions, which I followed, but the issue is still not resolved. By the way, my pen will drag on my desktop and in Capture NX2 and other programs, just not in PSP.

View 14 Replies View Related

Photoshop :: Circles Inside Circles (or Rings)

Feb 11, 2005

I'm trying to make a logo. Circular logo with an inner ring maybe 4 px wide and 15 px inside the rim of the outer circle.

Basically I want a blue circle with a yellow inside ring. What's the best way of doing this? The only thing i can think of is: creating a blue circle marquee, and then another (trying to estimate a new circle size and change the color) that is yellow, and then making another smaller blue circle inside the new one. That's just ugly.

I tried the edit/stroke but that just gave me a stroke around the outer circle; it didn't put a ring inside the circle 15 px down.

Also I tried to contract the original circle by selecting it, then Modify/contract. That's got me a selected ring, inside the circle. Now how in the world do I make that little ring yellow? It just remains selected and I can't seem to find a way to color it.

View 9 Replies View Related

Paint.NET :: Drag To Extend Selection / Fill

Oct 20, 2012

Selecting or filling a region of non-uniform color is a common need. Adjusting tolerance is one approach, but I find that it is often problematic. Sometimes you have to play with the tolerance to get the right value. (New paint bucket features described for 4.0 should work with this.) Other times there is no single tolerance value that will give the desired results.

I wish that the paint bucket would simply behave like a real paint bucket in the sense that I could drag it through adjacent regions to fill them all with the same color value. This would give the same result as clicking in each of these regions in turn, but it would be faster and easier, especially in cases involving small or narrow bands of color that are difficult to distinguish visually. I come across such situations frequently. The same thinking would apply to the magic wand.

I imagine accomplishing this by perhaps holding down Ctrl or some other modifier key as I do my dragging. This would not interfere with expected behavior by people who have trouble clicking without moving the mouse.

View 4 Replies View Related

Paint.NET :: Pull Or Drag Piece Of Image?

Mar 21, 2012

when it comes to graphics editing. I want to distort an image by dragging a point around, resulting in the image being stretched or pulled by that point. I'm not seeking the stretch/distortion, as much as the movement of bits of the picture.

For example, imagine a smiley-face. I want to click and hold the mouse button on the end of the smile & then pull down to below the center of the smile. Do that again for the other end of the smile. Result = a 'frownie-face'.

Is there anyway to do such a thing with Paint.NET, or an existing plug-in?

View 4 Replies View Related

Paint Shop Pro :: Layers Drag And Resize Not Functioning Correctly?

Oct 17, 2013

Working with layers in Paintshop Pro X6 instruction # eight says: To resize (the layer that I just placed on my background image) click on one of the corner nodes and drag outward. But no corners or nodes are showing for me to drag the layer to where I want to position it. It seems like a step is missing from the instructions.

So as it stands, I can get my layer onto the background image but I can't resize or reposition it at all.

View 2 Replies View Related

Illustrator :: Why Won't AI Allow To Drag Selection Icon Into Live Paint Group

Jan 23, 2013

I routinely add paths to existing Live Paint Groups, by dragging a path that is outside the group, into the LP group. But AI won't let me drag the "selection icon" from a nested layer, into an existing LP Group. Why?

It seems I'm requesting the same action, but AI won't allow the icon to be dragged into the group. I have to either open the layer and drag the objects directly, or drag the objects into the main layer, then into the Live Paint Group. I think this is an interface flaw.

FYI… I realize I could jump into the Live Paint Group using Isolation mode, but that takes extra steps and makes the template less useful.

View 5 Replies View Related

Corel PHOTO-PAINT X4 :: Drag Clip Mask Existing In New Object?

May 25, 2012

Corel Photo Paint X4.

I have an object with a clip mask.I post a new object.

How do I drag the clip mask existing in the new object?

I tried to drag with the mouse, but it closes the program.

View 2 Replies View Related

Premiere Pro :: Drag Down Into Editing Section Only Allows To Drag Video And NOT Audio

Jan 5, 2014

In my Adobe Premire Pro CS6 project, When I select a clip that I want to drag down into the editing section it only allows me to drag the video and NOT the audio. I need both video and audio and it wont let me, I don't think I clicked anything wrong but

View 2 Replies View Related

AutoCAD LT :: Copy Layer From One Drawing In Model Source To Another Drawing In Paper Source

Nov 7, 2013

I need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.

View 3 Replies View Related

Paint Shop Pro :: Can't Click And Drag Image With Mouse When Using Full Screen Preview Under Edit Tab

Aug 17, 2013

I can't seem to click and drag an image with the mouse when using Full Screen Preview under the Edit Tab.

I see the hand icon and the scroll bars when the whole image can't fit on the screen but when I left click it's like I hit the Esc button.

Clicking the scrollbars will work but isn't as convenient. Under the Manage tab it works correctly. I have reset the workspace with no luck.

I use this feature a lot and would like to know if others have this problem.

The problem existed in X5 SP2 and now X5 SP3.

View 6 Replies View Related

AutoCAD .NET :: Attributes Not Centered

Jun 24, 2011

I have a block that is being inserted to my drawing via my .net program. The problem I am having is my attributes are centered, but the content coming from .net is not. If I change the attribute value in AutoCAD after the fact it goes back to being centered.

View 5 Replies View Related

Photoshop :: Text Not Centered

Feb 16, 2009

I'm recording an action and want the text to be centred horizontally. It just won't do it. Pressing the paragraph buttons shjoot the text off the side and seems to be based on where you intially type the text in the first place. This must be the simplest thing on PS why won't the text just jump to the middle of the photo?

Secondly I'm drawing a selection around the text (then filling with black). There seems to be no way to centralise a selection box either. As when I run the action on different sized photos the box and text end up in completely different places, separately. Why is this and how can I centralise a selection too?

View 8 Replies View Related

Photoshop :: Why Image Not Centered When Print

Nov 18, 2012

Why is my image not centered when I print? I have set everything correctly, but the end result is always an image that is pushed off the page. I thought it was my old printer, but I just got a new one, and it is happening with this one, too.

View 1 Replies View Related

Photoshop :: Image Gets Centered At Zoom Out In CS6

Mar 22, 2012

Zoom in so much that the image is bigger than the screen and then navigate somewhere near the edges of the image. Then zoom out again. When the image is the size of the screen, Photoshop centers it annoyingly. In short, it's not possible to move the photo on the screen when it fits the screen, only when it's zoomed in a bit.

Reasons of moving a fitting image on the screen can be for example that the screen is big and you want to get a certain edge of the image at the top of the screen... or near the tools, who knows.

Really annoying anyway and the option "Resize windows when zooming" doesn't affect this behaviour.

View 1 Replies View Related

AutoCAD .NET :: Plot DWG With Centered Attributes

Jan 16, 2012

My routine inserts in modelspace different blocks with attributes in it with justification "Center".After the blocks are inserted and the attributes are filled, it all looks good in Autocad.Then I want to plot the DWG.

The problem is that the centered attributes in the plot are then justified to "Left" ?When I run my routine the second time in the same drawing then it goes well.It looks like the attributes or blockreference isn't updated well in the database after insert?

      public static BlockReference InsertBlockReference(Database database, string filename, string blockname, Point3d
        insertionpoint, Scale3d scalefactor)
         {
             using (DocumentLock documentLock = Active.Document.LockDocument())
             {
                 using (Transaction transaction = database.TransactionManager.StartTransaction())
[code]..

View 9 Replies View Related

Photoshop :: Zoom Out Centered On Cursor

Aug 17, 2009

When I zoom in with the scroll wheel, the zoom is relative to location of the cursor. However, when I zoom out using the scroll wheel, it automatically zooms out relative to the center of the canvas. Is there a shortcut key or a setting that will allow for when you zoom out to be centered on the location of your mouse, rather than the center of the canvas?

View 6 Replies View Related

Lightroom :: Printing 12 X 18 Perfectly Centered On 13 X 19

Oct 30, 2011

I like to print 12 x 18 on 13 x 19 but a3 13 x 19 allows only 12.95 width. If I select my custom template 13 x 19 with .5 border it tells me i must use front loading, occasionally it has let me but most of the time i must print 11.95 x 18 making photos a little off center?

I am unable to perfectly center because print driver on canon pixma pro mk2 gives only a3 13 x 19 with a border, yet it takes 13 x 19 with driver setting.

View 1 Replies View Related

Lightroom :: 4 Print 8x10s Not Centered

Apr 18, 2013

When I print 8x10s in Lightroom 4, they are not centered even though the box labeled center is checked. Strangely, I do not have this problem printing 11x14 or 4x6.

View 4 Replies View Related

Photoshop :: Keep Guides Centered When Resizing Canvas

Nov 7, 2012

I'm working on a 960 grid layout, with all the vertical guides showing the grid.

I want to increase my canvas width from 960 to 1200, keeping the artwork centred, so in the canvas size dialog box I select the center anchor. Unfortunately this keeps the artwork centred but the guides always move left, as if they're anchored to the left of the canvas. This means the guides are no longer in position.

Is there any way to add more canvas to both sides while keeping the guides where they are relative to the artwork?

View 4 Replies View Related

VideoStudio :: Motion Tracking - Keep Object Centered?

Nov 26, 2013

There ought to be a way to do this, but I don't see how: I record forums, and the presenter frequently wanders back and forth across the stage. I can use the motion tracker to track his wanderings (since the camera is set to a fairly wide angle). What I want to do with the motion tracking information is have the presenter's clip pan back and forth as he walks forth and back - with the net result that he stays in the center of the screen. (I'd use a zoomed portion of the image so that there would be enough to fill the frame.

Is there a way to do this? It would make forum recording so much easier.

View 3 Replies View Related

CorelDRAW X6 :: Last Line Centered Instead Of Flush Left?

Jan 24, 2013

Text> Paragraph >Full justify. Can one make the last line centered instead of flush left?