Paint.NET :: Screen Is Not Centered
Jan 12, 2012
i have a picture of a person and i moved the person from the original picture and background into another background. when i imported the second background and put the two together, the person was in the new background but they both were up in the left hand corner of the screen and very small. i've tried everything i know to get them back into the middle of the screen but no luck. i'm sure i must have clicked on some button that i shouldn't have but i can not for the life of me figure out what it was. i can not go forward with pdn as long as this problem exists and the work i have to do is standing still instead of progressing.
View 3 Replies
ADVERTISEMENT
Feb 12, 2012
The circle tool, in the standard paint.net tool set, anchors the a circle at the corners of the circle's "bounding box".
So when you want to draw a circle around a certain point - you have to center the circle yourself
I want to have the circles anchored to the point that I start the drag (centered at the point I hold down the mouse to start the drag).
If you imagine wanting to drawn a target (concentric circles) - you'll get the idea.
I cannot see a way to do this automatically in paint.net.
View 4 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Jul 15, 2013
is there any module I put a preview screen in paintnet why fasso pa and presiso much of a preview, by: google translate
View 5 Replies
View Related
Jun 24, 2011
I have a block that is being inserted to my drawing via my .net program. The problem I am having is my attributes are centered, but the content coming from .net is not. If I change the attribute value in AutoCAD after the fact it goes back to being centered.
View 5 Replies
View Related
Feb 16, 2009
I'm recording an action and want the text to be centred horizontally. It just won't do it. Pressing the paragraph buttons shjoot the text off the side and seems to be based on where you intially type the text in the first place. This must be the simplest thing on PS why won't the text just jump to the middle of the photo?
Secondly I'm drawing a selection around the text (then filling with black). There seems to be no way to centralise a selection box either. As when I run the action on different sized photos the box and text end up in completely different places, separately. Why is this and how can I centralise a selection too?
View 8 Replies
View Related
Aug 25, 2013
when I close PSP X5 I get this blank white nag screen telling me I can get some free tips for being a better photographer and then in the middle there's a checkbox to tell it that I don't want it to appear no more so I tick it then click "close" nothing happens and clicking the red X doesn't do anything and I've checked process explorer and its linked to Corel PSP X5 for sure and to close it I have to kill the process every time.
Is this addressed in SP2 for X5? Or do I need to reinstall?
View 2 Replies
View Related
Aug 2, 2010
Using PSP X3 on an Win7 Home Premium system with an ATI HD 5700 Series card.My Version is 13.2.0.35 and video card driver/software was updated 2 days ago.
I do a lot of screen captures but I have not been able to get X3 to include the Cursor in the capture!!I have tried it in Full Screen, Client area, and Window but it never shows up.I have even un-checked it (Include Cursor) and re-checked it to make sure it was set
View 10 Replies
View Related
Nov 28, 2012
Under the direction of the tech support i have reset my Corel Paintshop Prox5 back to factory settings, and now my Windows screen tab for lack of a better word, where you can move the windows screen around with your mouse, the part that has the Minimize,Maximize,Close, at the top, is now off, is there a way to get it back on ?Without it i cant have two screens side by side. One covers the other one up. When reloading i some how turned it off ?
View 2 Replies
View Related
Apr 6, 2010
I have just downloaded and installed Paint.NET today; is it possible to capture screen shots?
View 8 Replies
View Related
Apr 9, 2012
I used to use Paint shop pro, years ago and it had a nice little screen shot function. Does paint.net do this as well?
View 5 Replies
View Related
Nov 18, 2012
Why is my image not centered when I print? I have set everything correctly, but the end result is always an image that is pushed off the page. I thought it was my old printer, but I just got a new one, and it is happening with this one, too.
View 1 Replies
View Related
Mar 22, 2012
Zoom in so much that the image is bigger than the screen and then navigate somewhere near the edges of the image. Then zoom out again. When the image is the size of the screen, Photoshop centers it annoyingly. In short, it's not possible to move the photo on the screen when it fits the screen, only when it's zoomed in a bit.
Reasons of moving a fitting image on the screen can be for example that the screen is big and you want to get a certain edge of the image at the top of the screen... or near the tools, who knows.
Really annoying anyway and the option "Resize windows when zooming" doesn't affect this behaviour.
View 1 Replies
View Related
Jan 16, 2012
My routine inserts in modelspace different blocks with attributes in it with justification "Center".After the blocks are inserted and the attributes are filled, it all looks good in Autocad.Then I want to plot the DWG.
The problem is that the centered attributes in the plot are then justified to "Left" ?When I run my routine the second time in the same drawing then it goes well.It looks like the attributes or blockreference isn't updated well in the database after insert?
public static BlockReference InsertBlockReference(Database database, string filename, string blockname, Point3d
insertionpoint, Scale3d scalefactor)
{
using (DocumentLock documentLock = Active.Document.LockDocument())
{
using (Transaction transaction = database.TransactionManager.StartTransaction())
[code]..
View 9 Replies
View Related
Aug 17, 2009
When I zoom in with the scroll wheel, the zoom is relative to location of the cursor. However, when I zoom out using the scroll wheel, it automatically zooms out relative to the center of the canvas. Is there a shortcut key or a setting that will allow for when you zoom out to be centered on the location of your mouse, rather than the center of the canvas?
View 6 Replies
View Related
Oct 30, 2011
I like to print 12 x 18 on 13 x 19 but a3 13 x 19 allows only 12.95 width. If I select my custom template 13 x 19 with .5 border it tells me i must use front loading, occasionally it has let me but most of the time i must print 11.95 x 18 making photos a little off center?
I am unable to perfectly center because print driver on canon pixma pro mk2 gives only a3 13 x 19 with a border, yet it takes 13 x 19 with driver setting.
View 1 Replies
View Related
Apr 18, 2013
When I print 8x10s in Lightroom 4, they are not centered even though the box labeled center is checked. Strangely, I do not have this problem printing 11x14 or 4x6.
View 4 Replies
View Related
Dec 1, 2011
I have been using Paint Shop Pro for around fifteen years now and have always been very happy with each new version. I tended to upgrade every other version and have been using X2 for the last couple of years. With the recent announcement of Corel's service pack to fix some of the problems of X4, I decided to upgrade.
I uninstalled X2 and rebooted ready to install my shiny new copy of X4. All went well until I tried to start it up. The splash screen appears and starts to load up the components but every time it gets to "Initializing Palletes" it crashes and I get the "Paint Shop Pro has stopped working" and the options to close or go online and check for a solution!
I've tried uninstalling it, repairing the install, and also uninstalling it using the RevoUnInstaller as recommended by df but it didn't work. I also tried installing SP1 to see if it worked but didn't.
I can't even get this thing to start up at the moment. I need it for a few projects I'm working on and am beginning to wish I had left well alone!
I'm also dreading trying to re-install X2 as I can see that having problems if X4 has screwed up any deep-seated settings.
View 3 Replies
View Related
May 20, 2010
I've used PSP for many years and used the screen capture many a time. But I can't get it working fully on Windows 7 x64. I usually have it configured to use F10 to start the capture of an area. It was working a bit (but never with IE8) about 30 minutes ago but just isn't working at all now.
View 4 Replies
View Related
Jul 10, 2012
Is it possible to have more than one picture (preferably 2 or 4 and maximum 6) on a full screen at the same time. So that choosing which picture you want to keep is made easier. Now I increase zoom of thumbnails but this leaves a lot of unused space around them including the different tool bars.
View 2 Replies
View Related
Jun 24, 2012
I downloaded and installed Service Pack 2 for X4 some time ago. It created havoc with my highly customized workspace and I reverted to the System Restore point set before installing SP2. So, no SP2 on my system.
Corel Guide>Settings>Messages, both messages UN-ticked.
Clicked on Check for updates using the Corel Guide and also under Help>Check for updates, to see what happens.
Nothing happens, they just stop running I then close X4 and (quite a while later, usually when doing something else) a screen appears "An important update is available for PSPX4 Download update now!
View 4 Replies
View Related
Dec 3, 2012
I'm a longtime user of PSP 8 and just downloaded the trial version of PSP X5, thinking to buy it. With PSP 8, if I wanted to edit two images on the screen at the same time, I loaded them both into the program and then used the minimize button at the upper right hand of each image to switch them out of full-screen mode and put them next to each other. PSP X5 no longer has the minimize buttons attached to the images. I can tab back and forth from one image to the other, but I can't figure out how to put them both on the screen simultaneously. Is this feature still present somewhere in PSP X5? How do I access it?
View 2 Replies
View Related
Jun 28, 2011
When I open up an editing box. ie Local Tone Mapping, Adjust Brightness/contrast etc etc, the box that opens up is only partially on screen, you cant drag it into a different position because the top part where you click to drag is off screen, even if I semi minimise the window it is still off screen. Is there a way when these are opened to dock them to one side or to a permanent position. Windows 7 64bit - PSPP X3
View 2 Replies
View Related
Sep 8, 2012
I've been a PSP user since PSP 7.
I've got a question about x4. When I do multiple screen captures and then I click on the minimized x4 icon, it doesn't just open back to the workspace like it used to in psp 7. It always opens this pop up of all the captured files I took and I have to select one in order to re-open the minimized x4. It's so irritating because I go back n forth a lot taking screen caps but it always has to force me to choose a file.
If there is a setting to skip it and just re-open x4 to workspace when I click on the minimized icon after taking multiple screen caps?
View 5 Replies
View Related
Jan 29, 2012
Image with resolution larger than monitor size, view in PSP set to 1:1...Ctrl+Shft+A for full screen view.
PSP switches to full-screen with move (hand) tool present for moving around the image. However, when the move tool is used it behaves like the Esc key and defaults back to preview view within PSP.
View 1 Replies
View Related
Feb 9, 2013
I am not sure how this happened, but using PSPX3, when i need a new layer, the dialogue window is way to the top. The values and all are accessible but when i am doing live presentations or recording tutorials, this is an annoyance. It is so high that i cannot grab the top of the window and pull it down. It is only for that one dialogue window and only for that one PSP version.
I tried resetting the workspace to default, i tried reloading an old workspace, but that one stubborn dialogue window is still there on top.
I tried changing the screen resolution temporarily to see if i could "grab it" to move it back down, but it still is "ungrabbable".
View 9 Replies
View Related
Apr 24, 2013
Version 1.5.0.12 (the SP2 patch was installed). But I'm unable to figure out how to setup screen capture because that option is grayed out. I'm unable to complete Step 1 due to the latter issue. That is: File | Import | Screen Capture | Setup; I can never reach the fourth selection.
View 3 Replies
View Related
Jan 10, 2012
I just haven't found the setting, but I can't seem to make the cursor disappear during full screen preview in PSP x4! Is it something I'm not selecting?
I have searched to the ends of the internet for an answer, but have come up with nothing, however I noticed that there was an ESC key bug with full screen preview in PSP x3, and having a visible cursor would allow one to exit full screen without having to press a key. Could this be why the cursor is now visible? Now that I think about it, I've always been able to exit with either the ESC key or a mouse click. Still, this is something I've never seen before in any version of PSP.
View 2 Replies
View Related
May 21, 2012
When I open up the image that I want 2 use 4 my background the image fills the (working) window. Then, as instructed, I go in2 "Layer" & import the pic w/the green screen background. But when I then go 2 "Effects" & choose/use ChromaKey (again, as instructed) the background pic is now only a small square in the upper left hand corner of the window & the rest of it is white. Therefore, my pic/finished result has a background w/a little square in the upper left hand corner & the rest is white?
View 3 Replies
View Related
May 20, 2011
I'm trying to get an image from my "Print Screen" function. I know it's saving to the "clipboard" because I can get the text to show up on a Microsoft Word Document, but not the various colors. The Print Screen is save from the "Command Prompt" Screen where I have code displayed for a program I'm working on.
View 1 Replies
View Related
Dec 15, 2012
I am trying to write some text onto the screen, and it is invisible. No matter what colour I have the text and/or background, it comes up invisible.
View 2 Replies
View Related
