Photoshop :: Unable To Resize Object In...
May 14, 2009
All, Previously i worked with Excel 97 and Photoshop 7.1.0 or CS3 and i was able to copy a selection to the clipboard from a Photoshop drawing and then paste into an Excel 97 workbook as a Photoshop Object and then resize/format the object within the workbook until the desired format was reached before saving the workbook. No problem. Since upgrading to Excel 2007 i am no longer able to do this. When i paste the Photoshop Object into the Excel workbook it initially pastes fine however as soon as i attempt to resize the object it vanishes and i am left with a small square where the object was and any further attempts to manipulate this object does nothing. Is this a known issue with Excel 2007 or can anybody suggest what may be causing this please?
View 1 Replies
ADVERTISEMENT
Dec 11, 2012
I have used photoshop for years and bought Elements 9 a while back-I have yet been able to resize anything...bad disk? (Yes I know about the reisze tab).
View 6 Replies
View Related
Jun 18, 2009
I can't resize a photo when I drag it to a new layer in another open project. I don't know if it is because it is a smart object or what. My workflow iscapture Raw photo, edit in raw, open in new project as smart layer, resize (fine), select split screen displaying this project and another one. Then I drag the photo across to the other project. A new layer opens in the project that I have copied my photo to but I can't resize it for some reason.
View 1 Replies
View Related
Jan 12, 2013
Is there any way to resize and reposition an image on a 3D shape without affecting the shape itself, or is it just a process of trial and error, depending on the size and position of the image before you select New Mesh From Layer?
View 2 Replies
View Related
Nov 20, 2013
I am unable to resize text boxes and shapes.
I have tried to reset my bounding box and also hidden and unhidden edges. It won't let me resize anything. Where there used to be an resize cursor, there is just a default cursor.
[URL]
View 7 Replies
View Related
Mar 16, 2011
When I place an object on the stage, I can move or resize is uzing the handles. However when I enter the coordinates or dimensions manualy nothing hapens.
I already tried to reset the workspace (F8 during startup).
View 5 Replies
View Related
May 28, 2013
I was just wondering whether you can resize an object using keyframes. I want to have the object start small and then project and open out and grow. Is this possible?
View 1 Replies
View Related
Oct 26, 2013
When I enter a value, such as 2.2, as the height in the Transform box, AI automatically changes the value (to 2.1944, in this case). Is there any way to fix this?
(I have deslected "Align New Objects to Pixel Grid" and have deleted the AIPrefs file. I am working with AI CC and Windows 7.)
View 1 Replies
View Related
Jan 31, 2011
I usually use Photoshop and Fireworks, but have gotten sick of paying through the nose. I just installed Paint.net and notice that this program appears to be a great alternative to the above mentioned, but seems to be lacking a few tools. Once I get past the basics, I'll really start enjoying this program.
If I draw a square on a new layer, how do I select it to resize it or move it. I have tried to use the 'Move Selection' tool, but it keeps moving the entire layer and doesn't select the square.
View 3 Replies
View Related
Nov 28, 2012
1. Lately I can't resize an object. The surrounding border of the object is with filled rectanglers and not with hollow rectangler.Thus, I can't resize objects - how can I fix it ?
2. When I try to mark text, it's mark it perfectly but I can't see the higlighting even though I choose it. How can I mark text and see the text marked (chosen text marked)
View 3 Replies
View Related
Apr 16, 2013
In a training video on Illustrator cs6 a device is shown as follows, as the instructor manually resizes an Artboard using the Artboard tool:
Justin, the instructor, calls the little box that immediately shows width/height a "width and height box" but searching on that term is not productive. When I run the program the device is not available, not does the video explain what option makes it available or what might have changed on my particular copy to obscure or disable the box. While I know I can get the same effect by choosing the Info window, and can even adjust the parameters more precisely using the control panel bar, I would like to have the convenience of this box.
I note that in the same video series (from Lynda.com) the same type of display device is shown when the instructor resizes a graphic. After some 30 minutes of Google searches and searching for the identity of this device and how to enable it I come up empty.. An experienced Premiere editor, I'm trying to widen my skill set into more of the Adobe suite and new to Illustrator;
View 2 Replies
View Related
Jun 12, 2013
how can i resize an object (with the aid of paths) WITHOUT change the gradient? (ps, my default is right at scale strokes & effects)
View 2 Replies
View Related
Dec 28, 2012
How do I regain my selection box? Cannot resize any selected object.
View 2 Replies
View Related
Jul 11, 2011
We do a lot of artwork for screenprinting that needs to generally be 11" tall for adult shirts and 9" tall for kids sizes.
I recorded a macro that basically copies everything on the 11" page onto a new page, pastes the graphic and then resizes it to 9" tall. The problem is that when it resizes, it doesn't seem to keep the proportions.
For example, if I have a circle that is 11"x11" and use my macro, I would expect it to be resized to 9"x9"
Instead, after using my macro, the circle is resized to 9" tall by 8.36" wide.
Did I make a mistake somewhere when recording this macro? I'm not a pro at deciphering macro scripts so I've attached it here:
Sub Kids_Size() ' Recorded 6/30/2011 ActivePage.Shapes.All.CreateSelection ActiveSelection.Copy Dim p1 As Page Set p1 = ActiveDocument.InsertPagesEx(1, False, ActivePage.Index, 11#, 17#) p1.Layers("Layer 1").Paste Dim Paste1 As ShapeRange Set Paste1 = ActiveSelectionRange ActiveDocument.ReferencePoint = cdrCenter Paste1.SetSize 8.360346, 8.999996End Sub
View 2 Replies
View Related
Aug 24, 2012
I'd like to scale, rotate, and/or reposition a pattern-filled Live Paint cell, without cuting the cell from the Live Paint object. Can I do that? I routinely do this in normal objects, using the "~" key trick, but this only seems to work globally, on a Live Paint object (scales all pattern fills, not just one cell).
I'm still using CS5, but am interested to know if it can be done in CS6 as well.
View 1 Replies
View Related
Aug 21, 2013
How do I resize, rotate and reposition a logo within a Photoshop object using Warp and/or Vanishing Point? This may be a Photoshop question.
View 1 Replies
View Related
Dec 18, 2008
It has come to my attention that the new drag-resize feature only changes the master diameter of the brush but leaves the dual-brush diameter intact. It is the only shortcut that does this resizing improperly.
I would like to know if everyone else experiences the same problem. Is it a bug or is this way of resizing intended?
I mainly do digital paintings and this small bug makes the feature useless for me. I hope that it will be fixed at least in cs5.
View 5 Replies
View Related
Jun 11, 2012
In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
View 1 Replies
View Related
Jan 31, 2012
I would like to use multi-sub object but can’ t manage to make it work. I need to render a classical wooden crate with a “FRAGILE” logo over.
I applied as first material a proper wood. As second material I applied a standard black material giving a black & white JPEG as a map for the diffuse color of this second material.
Even if in the sample the result is what I’ m searching, when I launch rendering it just tender the jpeg mask over the wooden one.
I know I could place another layer over it and map it, but multi-sub object could be very useful to me in the future so I would like to learn how to manage it.
View 5 Replies
View Related
Mar 8, 2013
I am attempting to place a material on a simple plane (in the file it is Plane 02, the hill like object).
For some reason, when I drag and drop the material from the material editor onto the object in the view port, the material does not apply.
This is how I always have applied materials and I can't figure out what is happening. Neither the space bar lock, nor Freeze are in effect.
View 4 Replies
View Related
May 11, 2012
I've got some troubles to add some hatchs in a 3D solid, or a 3d face etc, in autocad windows, without .net addon.
I can add a hatch, but the hatch is on a plane at the bottom of the solid, but not around the solid.
Is there any ways to do this programmatically?
View 1 Replies
View Related
Feb 21, 2013
I inserted an OLE object (a pdf) onto paper space and now I cannot grab it to get rid of it.
View 4 Replies
View Related
Mar 24, 2013
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
View 1 Replies
View Related
Feb 24, 2011
When I select an object to move I am unable to snap to the grips of the object or any other object close or any intersections. I have double and triple checked my osnap settings. Also, If I select a circle to move I am unable to select the center of the circle through additional osnap settings. One last issue, If I select an object and do a copy with base point command, I am unable to select a definitive base point. No grips or intersections show up.
My co-workers are able to do these functions but I am not.
View 2 Replies
View Related
May 11, 2011
I am getting the error message 'Path curve is coplanar with or tangent to the plane of the profile curve.Unable to extrude the selected object.'
when I try an extrude this shape around this rectangular shape below.
extrude.gif
extrude2.gif
View 5 Replies
View Related
May 18, 2013
When using object styles to define font parameters, CorelDRAW doesn't adhere to the object styles' properties:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 11 Replies
View Related
May 28, 2013
This is an AutoCAD 2011 related question about being unable to see under properties objects that I have attached to polylines in AutoCAD Map3D.
I have created an map3d .dwg that the polylines and points have attributes attached (objects). However, when I access the same file in plain AutoCAD nothing appears under properties.
Is is a format, import settings tweak or simply it can not be done?
View 1 Replies
View Related
Oct 4, 2012
i am drawing a chamfered-counterbored cylinder... i meet the problem: unable to revolve the selected object ! After i convert the object i drawng to closed Polyline path with the Pedit command, it cant be revolve !
View 1 Replies
View Related
Jul 28, 2012
I've been following the Convert 2D to 3D video that is given in the Help section of AutoCAD 2012, and whenever I try to sweep the handle using the same methods that were used in the video it says that it is unable to sweep 1 selected object (when I select the path). I've attached the DWG file.
Also, when I went to use the 3D align feature I did exactly as the video did, but my handle wouldn't align with the side of the mug. It kept lining up with the side but never between the top and bottom of the mug like you'd expect. I kept having to move it to get it down where it needed to be.
View 3 Replies
View Related
Aug 21, 2012
When in Orthographic view and in back, left, right, top, bottom, front view, I cannot draw an object as Cube by example. To be able to make the object I have to move a little bit my view .
Example. If I was in Ortho - Back view, I move the view a bit so it is not perfectly on the back view than it allowed me to draw object. Another way is to change to Perspective view.
why I cannot make object on straight orthographic view?
View 9 Replies
View Related
Nov 21, 2012
Inventor will not let me make a hole on the top of my object. The hole conformation button is grayed out no matter what the parameters are. I have tried to extrude a hole from a circle and same deal; it will not let me extrude the circle.
View 9 Replies
View Related
