I am attempting to place a material on a simple plane (in the file it is Plane 02, the hill like object).
For some reason, when I drag and drop the material from the material editor onto the object in the view port, the material does not apply.
This is how I always have applied materials and I can't figure out what is happening. Neither the space bar lock, nor Freeze are in effect.
Im trying to create a material for glass balustrade that will elevate and show outline but not block what is behind. Useful for shr screens (show tiling, taps etc) balustrade for balconies, stairs etc.
I have balustrade I'm working on now using a railing object. There are no posts at all and I'm using dynamic posts with a nothing material to cut up the guardrail material into pieces. So need the posts to disappear but stil cut the glass into sections. Also in elevation, need to see the glass outline but also to show what's behind. Normal glass in elevation rightly blocks what's behind (inside).
There is a problem with how materials operate. You are unable to use an object/material combination as a negative. For e.g. assigning my posts above a material that has 3d body turned off negates it impacting the glass (ie no longer cuts) so I have to 'see' the gaps otherwise the glass goes straight thru. The post has to be directly inline with the glass to cut (fair enough) but turning the 'gap' material 3D body display off and the railing def no longer sees the post cutting the glass just because 3d body is turned off in the material display. (not sure why these have to be linked. If glass has frame (shr screen) then it's ok. just turn off glass but if in the case of glass balustrade you need to be able to do it.
Im thinking maybe using another object rather than railing, like a curtain wall and having a very small width frame using normal glass material that will elevate and another glass material that will disappear.
I want automate selecting an object from a place on the window to another place on the artboard in Illustrator.
View 1 Replies View RelatedI have an issue exporting my AutoCAD civil 3d model to 3d dwf. I have exported my model to 3d DWF and am viewing it in Navisworks. When the model is viewed in the full render mode the material surface is not in the correct place, it appears to several hundred units (the model is several km2) lower in the Y direction then it should be. In autocad civil 3d when the surface is selected and displayed in the object viewer it is displayed correctly. Is there any reason why this is happening or a workaround to fix it when exporting.
Notes: AutoCAD Civil 3d 2012. Navisworks 2012. Surface render material is a Jpeg. When I originally referenced the Jpeg the surface was mirrored (I understand this is a common problem with the software) and I had to mirror it along the X axis so that the Image was upside down but the material viewed correctly. It is not upside down in the 3d DWF, just moved down.
I have recently modified the CC of a part family so that different materials for the same part can be chosen. When I exit the editor and place the component I can see the choice of the materials in the dialog box - no problems (See 1st attachment" But when I go to another users PC they cannot see any of the new materials in the "Place content center" dialog box!?!
For information, we are running Inv. 2011 with Vault Professional 2012
The CC libraries are stored on the server and we have one custom library to which I have publish the modified part family.
The custom CC has been fully synchronised with the Vault server.
The materials.xml containing the new materials used in the part family has been downloaded to the users local workspace.
Inventor 2014 Pro SP1, Vault 2014 Pro SP1
Windows 7, 64-bit
Intel Xeon 3.6GHz
32GB
Nvidia Quadro 4000
I have a psd image containing a number of layers, and a png image with a transparent background. I want to place the png image in the psd image but I'm not having much luck. If I copy and paste the png image, all I get is a selection outline, not the image itself. I created a new layer for the psd image before pasting, but obviously I'm doing something wrong.
View 1 Replies View RelatedI have been using CS5 Illustrator for over a year now and have had no problems until yesterday when I opened illustrator and was unable to place any images.
Â
I can click on 'place' and go find the file, it appears to go through the right process then there is no image on the artboard at all, anywhere. Then I decided to open up previously made files that contain placed images and all they have is a bounding box with no image. The Links panel recognises the name of the file but no image is visable, even as a thumbnail.
I have made a scene with a metal teapot (i have added it to to the showcase) but now i have deleted the teapot and added and object (a logo) form another project (also in 3ds max 10) and this object has an complex material (multi-sub material with 9 different materials) and i know that there is a way to add the material from the object to the editor but i don't know how...
View 6 Replies View RelatedI cannot place Photoshop pdf files into InDesign CS5 after updating to LION. I get the error message "Failed to open PDF file." I've tried to save as in Acrobrat and then place, get the same message. I've opened the file in Photoshop to re save and get an error message. I can't change our workflow for just me because I'm the only one having this issue.
View 3 Replies View RelatedI am trying to place some objects on a cone. But i can't get it to work. The idea is that the 6 objects should be fitted on the cone so that they are placed all around the cone. But i can't get them to align with the angle of the cone. I have tried the 3D align, but this just doesn't work for me.
View 9 Replies View RelatedI added a uvw map/bitmap image to the material editor. The image shows fine in the material editor but when i apply it to the object which is just a plane it doesn't show it in the viewports.
I clicked on a new material ball, clicked the box next to diffuse, selected bitmap. Opened a jpeg file of the material Im using. It showed uo on the material editor ball. Then when I apply it to my object it just turns grey.
I am having difficulty placing components in my Revit Architecture 2012 model. They are wall hosted (outlets) & floor hosted (floor boxes) components. I have taken the MEP, Base Building, Interiors, and Structural models and linked them into my new file. I have linked them in as overlay. Should I have changed the reference type to attachment?
Â
When I go to place my components I recieve the following notifications from Revit and am unable to click any walls or floors: "Click on Wall to place Instance" (outlets) "Click on Floor to place Instance" (floor boxes). How do I set up these linked files so I can place my families?
I opened a new file...Then I tried to place a jpg and it wouldn't allow me. I started getting some missing plugin errors, tried to relaunch illustrator and I cannot. I get the Missing Required plugins PDF Format.aip error. I also cannot re-install as I don't have back-up disk, I work for a non-profit always on a budget.
Â
The PDF Format.aip is in the packages.
Is there a way to lock the material of an object, ie wood grain on a stud, so if the stud is rotated, the material stays in the original orientation to the object instead of stay relative to the world?
View 2 Replies View Relatedproblem i'm facing when ever i tried to apply a material to an object in AutoCAD 2010,I have set all the necessary thing required for the material to be visible such as visual style(Realistic/Conceptual),Material/Texture(on) and any of the isometric view.Below is a captured image of the problem.
View 1 Replies View RelatedI'm having a strange reoccurring issue with 3D items in CS6. Lately, it's been involving 3D postcards. Whenever I merge them with another 3D layer, hide then unhide them, they reappear in a completely different position and get "stuck". When I try to move or scale them, they snap back to the previous location.
View 6 Replies View RelatedWhen I am about insert a object I get that like the mouse arrow and then object I want is not in the same place.
[URL]
I need a way for Photoshop to place an object like Illustrator does. Sure, Smart Objects are nice but I need a method where I have a PS file and 1 or more layers in it are referenced. When these references are updated the PS file should update automatically (yes, I will have to have the file open and save ...). Illustrator does this ... page layout apps do this. I need for PS to do this or find a work method that will help do this. Any thoughts? The specific details:We have several hundred images of our app's interface. The images are composites of generic interface and language-specific interface. To make things easier when updating or translating docs we snag the local parts of the interface.We would then place and align the separate images in FrameMaker. We're moving to a new tool and output and we need to put all of the images together in a single image file but want to retain the ability to only update the localized sections. Smart Objects are not smart when trying to do this as they require you to either (essentially) re-import the object (using Replace) or edit the object from the composite image. This obviates the ability to simply replace the target image and have the composite update. So ...
View 1 Replies View RelatedIf I want to place an object in illustrator cs6 on a specific place (for example rectangle, left above corner on X=14mm) and I fill this value in the transform field and I tap the enter button, illustrator places the object on X=14,033.
Why does illustrator do this and how can I avoid that illustrator adjusts my specific X / Y values?
I am using Windows 7 64bit and Inventor 2012 SP1 (Build 190). When placing a new content center item an error message of "Unable to place component" is reported. Content center was working previously.
I determined the problem resulted in using a custom Date format in the Windows Region and Language setting. To duplicate go to Control Panel -> Region and Language ->Formats Tab -> Additional settings button -> Date tab and change the Short date format to a custom format (I was using ddd M/dd).
To fix simply reset to a standard date format.
Note that this can be done whilst Inventor is running and I have have submitted a bug report. None of the standard date formats resulted in errors. I have tested "ddd-dd/M", "ddd/MMM/yyyy", "yyyy/MM/dddd", and "yyyy-MM-ddd" and all resulted in an error. "yyyy-MM-dd" did not result in any error.
Material mapping.
When I apply a material to a mass element the material follow the world UCS, that's ok with me. But when i rotate the mass element the material map remains with the world UCS but not with the object.
How to lock the material map to the object when I rotate it.
Design 2012 and 2013 has been giving me problems in the material editor.
System Specs:
Win 7 Pro 64
AMD FX-8320 Black Edition
16GB Ram
GTX 660 GPU
Sabertooth 990FX
Max Design 2013 R6
Nitrous
Basically, when i add a sub-object to a slot in the material editor (Using Mental Ray)nothing happens right away, so I have to do it again to get it to show up in the material editor. When i do get it to show up the slot looks all wrong and distorted, everything is unresponsive. I can save the scene and restart Max and everything will be ok, but as soon as i try to add another Multi material to another object it happens again. This was happening also prior to updating to R6 which i did last night. I've read a post about the same thing for 2012 but there was no solution.
I just tried it with Direct3D rather than Nitrous and did not run into this issue (using default Scanline).Just switching to Mental Ray and changing the standard material to MR A&D made the program unresponsive again. I'm starting to think it's MR that is giving me issues. Upon closing Max i get an error message saying that an error occurred and the program will close.Just switched to OpenGL and tried it with MR, still getting the same results.
On Photoshop CS4 - I want to place a 2d image onto a curved 3d object so that the object rotates with the picture curved right onto it. How do you achieve this?Â
View 4 Replies View RelatedThis is my original drawing in Photoshop CS5 for Windows:My goal is to quickly center two objects while keeping one of them (blue rectangle in my example) in place:
Â
If I follow the standard procedure (select both objects, align vertical and horizontal centers), both objects are moved to the center of the drawing:So the blue square has lost it's original position which is not good.
I made a model and i want to place it in 4200sqft . How to do that ?
View 6 Replies View RelatedOur company uses xref electromechanical,
some problem we encountered after binding the xref become a block mostly like a baseplan & equipment system . can't edit block In-place in block references in latest autocad 2014 LT.
In mesh edit mode, when you assign a material to the selection, it works as expected, it assigns the material only to what is selected, for example, a face.
In poly edit mode, it works differently, if you try the same approach it assigns the material to the entire object and you have to deal with multi-materials and material IDs to achieve that, what is very boring and totally unintuitive imho.
Is there an option to make the poly editing mode work like the mesh editing mode, or at least another way to achieve the same result in a intuitive or at least 'visual' fashion?
With command massprop I can get many interesting data about 3d object, but where can I set material that my object is made of. Lets say I need to calculate volume and mass of my object which is made of aluminium, what are my options?
View 3 Replies View RelatedI am trying to place/ import a .psd as a smart object into a composite and have Photoshop keep referenceing that same psd witout it creating a local tmp file.
View 2 Replies View RelatedIt is my understanding that in Photoshop Elements I am able to place a circle around a moving object or person and have that circle stay with/track the moving object or person as the video plays? Is this correct??
View 1 Replies View RelatedI tried to use the command "Remove Material" from the rippon, and I get no rsponse, and deleted the material from the palette and yet the material there, How can I get rid of the materials I attached to the walls?
View 1 Replies View Related