Is there any way to resize and reposition an image on a 3D shape without affecting the shape itself, or is it just a process of trial and error, depending on the size and position of the image before you select New Mesh From Layer?
View 2 RepliesI'd like to scale, rotate, and/or reposition a pattern-filled Live Paint cell, without cuting the cell from the Live Paint object. Can I do that? I routinely do this in normal objects, using the "~" key trick, but this only seems to work globally, on a Live Paint object (scales all pattern fills, not just one cell).
I'm still using CS5, but am interested to know if it can be done in CS6 as well.
How do I resize, rotate and reposition a logo within a Photoshop object using Warp and/or Vanishing Point? This may be a Photoshop question.
View 1 Replies View Relatedwhen move an image into location and then do the place there seems to be no way to undo this and reposition it again? For now I delete the layer and do the place all over again.
Is there a way to reposition it once placed?
I installed CS 6 yesterday. My system runs 64 bit Win 7. In Preferences > Interface, as I did in CS 5, I unchecked both Open Documents as Tabs and Enable Floating Document Window. However, unlike CS 5, in CS 6 images 'insist' on positioning themselves in the upper left corner of CS 6 and will cover both the options bar and the tool bar. For example, this will happen after opening an image if I try to move it or if I enlarge the image window (CTRL-0). If I open two images and try to move one so I can see both at the same time, the one I try to move will not stay where I put it but instead will reposition itself to the upper left, and cover the options bar and menu bar.
this makes working in CS 6 difficult and inconvenient. I assume this is a bug, and wonder if there are any workarounds or other solutions. To this point, I have not yet uninstalled and re-installed CS 6.
If i zoom in image so it's bigger than "Fit on Screen" then if open/create or go to other opened image and return to 'zoomed' one, PS reposition area i see to right upper corner.
View 3 Replies View RelatedIn previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
All, Previously i worked with Excel 97 and Photoshop 7.1.0 or CS3 and i was able to copy a selection to the clipboard from a Photoshop drawing and then paste into an Excel 97 workbook as a Photoshop Object and then resize/format the object within the workbook until the desired format was reached before saving the workbook. No problem. Since upgrading to Excel 2007 i am no longer able to do this. When i paste the Photoshop Object into the Excel workbook it initially pastes fine however as soon as i attempt to resize the object it vanishes and i am left with a small square where the object was and any further attempts to manipulate this object does nothing. Is this a known issue with Excel 2007 or can anybody suggest what may be causing this please?
View 1 Replies View RelatedI can't resize a photo when I drag it to a new layer in another open project. I don't know if it is because it is a smart object or what. My workflow iscapture Raw photo, edit in raw, open in new project as smart layer, resize (fine), select split screen displaying this project and another one. Then I drag the photo across to the other project. A new layer opens in the project that I have copied my photo to but I can't resize it for some reason.
View 1 Replies View RelatedI am having trouble with Image/Resize/Image Size in PSE7. In the past I had a document size of 4x6. When I wanted to reduce the # of pixels, I just entered new #s and the document size remained the same. A couple days ago I changed both the document size and canvas size. I cannot get my old settings back. I even uninstalled and reinstalled the program, I also have PSE11 on a trial basis and it also only sees the changed settings. I've tried changing Scale Styles, Constrain Proportions & Resample Image, in addition to changing the Canvas Size but cannot get it to work like it did before I changed the settings.
View 6 Replies View RelatedI have completed a project and I need to verify that, based on what I implemented, image should be resized but quality of image (both JPEG and GIF) should not be reduced.
My question is it possible to verify the result using photoshop or some other tools? How?
My college said it is hard to check if an image looks different because of image resizing or because of quality loss or because of both. He said I have to create some log files to trace the result. It is a little too much work for me.
I was wondering if there is a possible way to take a small image and make it larger and clear.
View 9 Replies View RelatedWhen I place an object on the stage, I can move or resize is uzing the handles. However when I enter the coordinates or dimensions manualy nothing hapens.
I already tried to reset the workspace (F8 during startup).
I was just wondering whether you can resize an object using keyframes. I want to have the object start small and then project and open out and grow. Is this possible?
View 1 Replies View RelatedI usually use Photoshop and Fireworks, but have gotten sick of paying through the nose. I just installed Paint.net and notice that this program appears to be a great alternative to the above mentioned, but seems to be lacking a few tools. Once I get past the basics, I'll really start enjoying this program.
If I draw a square on a new layer, how do I select it to resize it or move it. I have tried to use the 'Move Selection' tool, but it keeps moving the entire layer and doesn't select the square.
1. Lately I can't resize an object. The surrounding border of the object is with filled rectanglers and not with hollow rectangler.Thus, I can't resize objects - how can I fix it ?
2. When I try to mark text, it's mark it perfectly but I can't see the higlighting even though I choose it. How can I mark text and see the text marked (chosen text marked)
In a training video on Illustrator cs6 a device is shown as follows, as the instructor manually resizes an Artboard using the Artboard tool:
Justin, the instructor, calls the little box that immediately shows width/height a "width and height box" but searching on that term is not productive. When I run the program the device is not available, not does the video explain what option makes it available or what might have changed on my particular copy to obscure or disable the box. While I know I can get the same effect by choosing the Info window, and can even adjust the parameters more precisely using the control panel bar, I would like to have the convenience of this box.
I note that in the same video series (from Lynda.com) the same type of display device is shown when the instructor resizes a graphic. After some 30 minutes of Google searches and searching for the identity of this device and how to enable it I come up empty.. An experienced Premiere editor, I'm trying to widen my skill set into more of the Adobe suite and new to Illustrator;
how can i resize an object (with the aid of paths) WITHOUT change the gradient? (ps, my default is right at scale strokes & effects)
View 2 Replies View RelatedHow do I regain my selection box? Cannot resize any selected object.
View 2 Replies View RelatedI have signed up for Adobe CC and now have Photoshop CS 6 for the Mac installed and running.When I come to use the image resize feature, I am still getting the same box as I had in CS5 instead of the new much improved feature.
View 1 Replies View RelatedIm doing a picture project, where I need to have many layers..
But just how exactly do I resize an image in a layer? If I go Image > Resize Image...the whole image collection of all layers gets bigger...and I only want that specific layer image to get bigger...
I have a jpg that is 300*300 and a res of 72 pixles per inch I need to resize for printing by about 300% (I think min print res is 300dpi) without it getting to pixalated.
View 3 Replies View RelatedI open an image and I want to use a eraser or other tools but it asked me to resize the image
View 1 Replies View RelatedI do have a image 480X320.
How to resize this image to 960X640 without loosing pixels?
I have tried to Group picture Layer into New Smart Object and then resized the image , after this I added a sharpen from Filter .
But still I am loosing image quality.
I need to resize images about 6000... they are all different size and they must be all 15k to uploas in PHP on a web server...
I tryed to create a droplet but you can only change the image size but the weight of the image can be control!
way to resize an image which has been placed on a background, without losing resolution?
I know there's free transform but is there a way you can just type in dimensions and it automatically resizes?
I can no longer simply type in a new image size using the same method I have used for years--did Adobe change this with a update download? The only way I can now change the image size is by using the up/down arrows.Running WindowsXP--I have both CS2 & CS3 installed.
View 10 Replies View RelatedThis is probably the most newbie thing ever, but how do I resize an image in a layer by dragging it with the mouse? Can you do this? I wanna fit some things together visually and I don't wanna screw around with numbers.
View 4 Replies View RelatedWe do a lot of artwork for screenprinting that needs to generally be 11" tall for adult shirts and 9" tall for kids sizes.
I recorded a macro that basically copies everything on the 11" page onto a new page, pastes the graphic and then resizes it to 9" tall. The problem is that when it resizes, it doesn't seem to keep the proportions.
For example, if I have a circle that is 11"x11" and use my macro, I would expect it to be resized to 9"x9"
Instead, after using my macro, the circle is resized to 9" tall by 8.36" wide.
Did I make a mistake somewhere when recording this macro? I'm not a pro at deciphering macro scripts so I've attached it here:
Sub Kids_Size() ' Recorded 6/30/2011 ActivePage.Shapes.All.CreateSelection ActiveSelection.Copy Dim p1 As Page Set p1 = ActiveDocument.InsertPagesEx(1, False, ActivePage.Index, 11#, 17#) p1.Layers("Layer 1").Paste Dim Paste1 As ShapeRange Set Paste1 = ActiveSelectionRange ActiveDocument.ReferencePoint = cdrCenter Paste1.SetSize 8.360346, 8.999996End Sub
How do I resize an image to exactly 909x600
View 9 Replies View RelatedI have an image of approx. 1000x1000px... I need to make the image 500x200. Everytime I try to resize the image it comes out looking "stretched". Is there any way of resizing or shrinking the image in photoshop without distorting the image?
View 3 Replies View Related