Photoshop :: To Extend Edges Of Number Of Images To Give Extra Bleed Room For Print
Feb 23, 2012
I'm trying to extend the edges of a number of images to give myself extra bleed room for print. The images have bits that are a little too near the edge and I need more room. The effect I'm looking for is repeating the final edge row of pixels for 1/8 of an inch beyond the original image on all side.
The obvious solution, manually repeating the row of pixels is too time consuming for the number of images I need to format.
The solution would have been simple if the imbeciles at adobe hadn't moved the "extend edges" option to the Oh-So-Useful auto lens correction tab in the lens correction filter. (how I HATE thee, Adobe)... Alas, I'm using CS5 and need an alternative solution.
View 8 Replies
ADVERTISEMENT
Jul 28, 2011
I have images from old photographs and drawings that I want to enlarge to A3 sent files to printers and they are only 150dpi Printer ran off 13 proofs (out of 125) for me only 6 of a quality I can just about get away with using...Is there anyway I can increase DPI on images to achieve 300dpi to give me a clear print
View 8 Replies
View Related
Oct 1, 2012
I've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.
both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.
been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?
View 13 Replies
View Related
Jun 10, 2013
Attext output file give a lot of extra empty values when template file include attributes from more than one block.
The drawings I want to extract data from has two blocks with attributes. If I make the template file with attributes from both blocks, I get a lot of extra empty values. If I split the template file in two with the attributes from each block in each template file, the output file is OK.
A copy of the same attributs giving different number of values. (Block REV)
Two template files - 'REV','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 6 att)
One template file - 'REV','','','','','','','','','','','','A','28.03.92','ISOLA','FS','SM','KJ' (Block name + 17 att.)
How can I get a clean output file giving only the number of values the template file is asking for when the template file has attributes from two blocks? I use ACAD 2010.
View 4 Replies
View Related
Jul 10, 2007
I'm trying to give a photo rounded edged, or give a 'rounded rectangle' a photo overlay, but I can't figure out how ...
View 5 Replies
View Related
Dec 7, 2012
How do I make a text book with edges that bleed into the background?
View 8 Replies
View Related
Aug 13, 2009
Basically, it was a way of extending the canvas size using the edge information of the image. The reason I am looking for it now is that I imagine it'd be a good way of creating a gallery wrap section for a canvas print, taking the edge detail and reproducing it. If you are not sure what I mean, have a look at this image on my blog. It's the technique I'm talking about. I have access to CS3 or CS4.
View 5 Replies
View Related
Nov 18, 2012
I'm designing a simple flyer that will be printed (I have little experience in the print world) and it might need to bleed to the edges, though I'm waiting to hear back from the person I'm designing it for.
If it does bleed to the edges, do I only need to make sure that the artwork on my artboard touches the edges of my artboard? OR is there something else that needs to be done?
View 6 Replies
View Related
Oct 16, 2012
i created one part. i want to give edges name. like feature name, sketch name, plane name etc.,
View 9 Replies
View Related
Apr 10, 2013
I already have a document created in CS6, now I want to make the background color bleed to the edges of the document.
Is it a problem that I started the document already and now want to make it bleed to the edges?
View 2 Replies
View Related
Mar 2, 2010
I want to modify the Room number label so that the rectangle outline displays smaller (less wide).
The rectangular box for the room number doesn't show up even when you open and try to edit the family, nor any parameters show up. How do you modify this box and make it smaller?
View 9 Replies
View Related
Nov 10, 2009
Is there a way to close the space between the Room Tag leader and the room number box? See the attached png file.
This gap seems to get larger if the room name is larger.
View 3 Replies
View Related
Dec 2, 2011
I’m importing an Autocad/AutocadLT 2007 dwg file into Visio 2010 to create a floor plan. I want to link each space in the Visio floor plan to an Excel spreadsheet. Each space will need to have an identifier – e.g. room number – in its properties in Visio and in its corresponding record on the spreadsheet. I’m dealing with a lot of rooms, so I’d rather not have to number them manually.
All of the rooms on the floor plan in the dwg file are polylined and all of the polylines are on the same layer of the dwg file. This layer contains nothing but the polylines. I also have another layer that has room numbers for each polylined room. The only thing on this layer are the room numbers as mtext objects.
As far as I can tell, the mtext objects aren’t linked to their respective polylines. After I insert the dwg into a new Visio document, using Insert>CAD Drawing, I right click on the drawing and choose CAD Drawing Object>Convert. In the dialogue box that opens, I check the box for the polyline and room number layers. I then select the polyline layer and go to Plan>Assign Category and choose “space”, which converts all of the polylines to spaces.
Is there a way to associate a room number with each polyline in AutoCad? Is there any way to map the room numbers on the room number layer in the Visio file to the Space ID property of the spaces I created?
I tried creating a block in AutoCad, on the polyline layer, consisting of a single polyline and a block attribute that stored the room number as a value. When I selected the polyline layer in Visio and went to Plan>Assign Category and chose “space”, to converts all of the polylines to spaces, the block was not converted to a space. It became an object in Visio that had its room number stored as a value, but it wasn’t a space.
Can I store the room number in AutoCad as xdata associated with each polyline and somehow have Visio recognize it as a property of each space?
Is there any way to create a custom property for polylines in AutoCad that the room number can be stored in?
View 0 Replies
View Related
Jun 28, 2013
We were updating the wall finish schedule in our template. Now using the template, if we create a new room, it's number is 3. Where is the setting that controls what the next available room number is?
View 2 Replies
View Related
Jun 1, 2012
So, I have designed a logo for a web site and the site owner wants it for a business card and letterhead. Saving an image for web is easy and I understand all that but how do I prepare a file for a printer? I'm guessing this is just nipping in to the local print shop on the high street.
View 2 Replies
View Related
Mar 14, 2013
I have a document which is sized for full bleed printing. I would also like to make PDF prints of this document, but if I simply print, then everything will be off by a little. Is there a non-destructive way to 'crop' the document back to the paper size?
View 4 Replies
View Related
Apr 10, 2008
Is it possible to designate a full bleed print or a smaller bottom margin than .56in in the print module. How?
View 4 Replies
View Related
Jun 29, 2011
There is a new plug-in for Illustrator from Onyx for banner print preparation:[URL]
Is there any macro or external program with similar functions for the preparation of banner print (Bleed, grommets, marks - see attachment) for CorelDraw?
View 14 Replies
View Related
Jan 29, 2014
How do I remove extra profiles from color mangement in Print Module?
View 2 Replies
View Related
Jul 13, 2013
I'm making a collage containing 4 images with different resolution. I want each image to have faded edges (to white) and I'm using gradient tool to accomplish this. The problem is that since the images have different resolution the gradient tool gives different result on each image even though I make the same "swipe". Is there another way of accomplishing these faded edges, equally looking and of the same size? The faded edges (to white) will, as you might have understood already, constitute the limit between the four pictures, that is, a white cross.
View 1 Replies
View Related
May 16, 2012
How do I get rid of the white border around my images when I export? I have tried making a clipping mask but for some reason when I export to a picture format I get this weird white uneven border around the images that wasn't there before I exported it.
View 1 Replies
View Related
Aug 30, 2012
I have a project in wich rooms functionality is compromised. I don't know why the room tool doesn't recognise a simple room delimited by walls whose property divides rooms is set to yes. If I place a rectangle of rooms delimiters the room tool works properly instead. If I start a new project the tool works properly.
View 1 Replies
View Related
Jan 16, 2013
I am editing an old file set up by another firm that is used by our clients to keep track of room sizes etc, which has a room data table and room tags tied to area polylines. It has worked just fine on our 2013 Acad Architecture, but when I sent them (saved down to 2010) back to our client, using 2012 Acad Architecture, the tags disappear and the table is unpopulated.It seems like it must have something to do with the file originally being created way back when, along with some quirk between 2012 and 2013.
View 2 Replies
View Related
May 21, 2011
When ever i do that i get an unexpected number of edges on an object.
View 1 Replies
View Related
Apr 17, 2013
Using a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies
View Related
Oct 21, 2007
Can I change image edges to look torn or have a different look to them, for instance, instead of being normally pointed, can I make a curve to them?
View 3 Replies
View Related
Jun 20, 2008
How do I blend the edges of these adjacent images to eliminate the hard line between them?
View 9 Replies
View Related
Nov 8, 2004
I have just completed a webpage in PS and want to slice it but I am not sure about how to slice my images that are feathered. Normally I would just create a slice around the borders of the image and then remove this slice in DW and insert the original Jpeg resized to suit. However the images in this page are a feathered.
I was thinking of perhaps slicing around the image leaving small border of say 5mm and save this as a jpeg. However howq would this match against the gif slices next to this. My background is an image so I am unable to just use a background colour option in DW.
View 3 Replies
View Related
Jun 25, 2004
I'm pretty new to photoshop and am struggling to seperate an image into two layers without dodgy white edges i've done it using the lasoo tool and have tried using a pen with path but the same thing seemed to happen. has anyone got any tips on how to do this without getting the white borders ...
View 1 Replies
View Related
Sep 7, 2012
I work in AutoCAD 2010.
(AMD 64 X2 4200+, 2Gb RAM, C: 7Gb free, D: 17 Gb free)
I can not print imported images (JPG or TIFF) large size 80 - 260 Mb.
Print all but the raster! I tried to print on a plotter in JPG, TIFF, in whole or in parts, useless.
If I export the whole project in JPG 2000x3000 pix, all right, but I have 9000x10000 pixels - that size is not exported.
View 1 Replies
View Related
Aug 2, 2011
I am using Corel Draw X3 to create name tags that have room numbers printed on them so people know where they need to go. I am importing an Excel spreadsheet for the data. When it does the print merge it is adding a decimal at the end of the room number. For example, instead of showing room 215, it outputs 215.0 instead. How can I keep this from happening? I've tried everything I can think of in Corel and Excel both.
View 2 Replies
View Related
