I am using Corel Draw X3 to create name tags that have room numbers printed on them so people know where they need to go. I am importing an Excel spreadsheet for the data. When it does the print merge it is adding a decimal at the end of the room number. For example, instead of showing room 215, it outputs 215.0 instead. How can I keep this from happening? I've tried everything I can think of in Corel and Excel both.
View 2 RepliesI am using CorelDraw to create price labels for my store. When I merge in the price field for an item I want it to show on the label with the cents in superscript as opposed to using a decimal and full sized cents text. Is this possible in any version of CorelDraw using the print merge feature?
Keep in mind that I also have the price field in an envelope so that the price takes up the full size allotted on the label whether the price is $1.99 or $999.99.
Why cant I save a cdr job with all the merge fields setup so that next time I open the file I can go straight to 'merge to new document'.
So Ive set up a 10 to view raffle tickets job. Inserted 20 numerical merge fields, positioned, resized, applied font size color alignment etc etc etc.. Takes ages..... So then merge to a new document, works nice and I can save it fine.
There are a hundred reasons why i may have to close the 'master' merge file before the job has been successfully printed. It may be a repeat print job.
Any which way I really dont get why the live merge data fields are lost on closing the file.
The program slows to a crawl when sending print merge jobs. Nothing else on the computer does this.
Core 2 Q6600 ~ 4GB DDR2 ~ nVidia 8800 GT Superclocked ~ 150GB 10,000 RPM Hard Drive
I have variable text that I need to print using the Print Merge in CDX6. One field of text requires that the "kerning" be set at +30. No problem in my template. However, after I have create the print merge to a new file, the kerning is gone.
What I am missing that will force the text "kerning" or spacing as in the original?
A1 field name is FIRST NAME B1 is LAST NAME C1 is ADDRESS D1 is CITY E1 is STATE
F1 is ZIP H1 is name1 I1 is name 2 Fields H1 & I1 could not be inserted.
I entered the above field labels and loaded them with the saved Excel file saved as a CSV (Comma Delimited)
When the First names and last names appear in a document there is too big of a space between the first and last names. The same problem happens when I put city, state, and zip on the same line
in the document.
I did a concatenate combining A1 &B1 to eliminate the space problem and a concatenate to combine D!, E1, and f1 Fields on one line. I put the results of the concatenates in seperate columns H1 & I1 but these 2 column fields could not be inserted for the print merge.
How i can solve the space problem between first and last names and the problem to put city, state and zip on the same line with proper space and punctuation.
I have a problem printing a merge booklet 8 pages. I am printing to a booklet printer. The printer folds and staples the booklet. When I merges the print I cannot “group” the pages to 8. The printer collates all the pages and make one booklet. How do I group the booklet one by one to several booklets of 8 pages. Windows 7 - 64 bit.
View 14 Replies View RelatedI have to make print merge firelds in CDX6.
The problem is that I have not Excel on my PC. Only Open office. I create a csv file but Open Office asks me every time what the Field and Text delimiter have to be - for the Field "," ";" ":" "tab" or "space" and for the Text " or '. After that it asks me to check or not few check boxes. See the picture below.
I tryed few combinations but the same result - Failed to save print merge data!
I dont know what to chek but the biggest problem is that I tryed to save a txt tab delimited on other computer with excel and when I try to print merge after loading the txt file Corel says Failed to save print merge data.
I saw that we can Print merge directly from xls files but I cant find that option in ODCB Data Source. Weird! because I have to do 1100 badjes with different merge fields like country, name, code etc... and if I start to make them by hand it will be forever!
First, I know how to use the base-print merge functions. Right now I have a job to complete with 1000 numbered 3part NCR forms.
I have never attempted this method (print merge), mainly due to my prior equipment limitations; however I am looking at realistically being able to print 100k+ page jobs without going to press/numbering machine (if only I could land about 10x 100k+ page jobs a month--press or no press--). Anyways, when I create this print merged file it takes easily 15 minutes to save (which might be understandable due to the number of pages to generate). BUT when I go to print, Draw closes. No error. No nothing.
When I use the print function in the print merge options, things lag extraordinarily. Also, I have to click on the various options many times for them to be registered. This option is like the prior--causing extremely unstable environments.
Auto numbering is a potential blessing, but this just isn't working for me. Also, is this a known issue? An upgrade to X6 might be prudent anyways; however, X4 is working fine for everything else.
(Running 3 different computers with Windows XP home & pro 32bit, with fairly good computers.)
I created a list if voucher numbering from 1001 to 1200, but when I perform the Print Merge, the list shown are with one decimal point i.e. 1001.0, 1002.0, etc....
What is the reason for this?
I am putting together a form for a soccer team, where I have a number of players with their info put into a nice table for scouting college coaches to have at their fingertips. It would be nice to automate this, but I don't see how to merge say 8 players' info onto one page. Any thoughts?
View 5 Replies View RelatedI have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies View Relatedview.jpg
since i upgraded to X6 i cannot do imposition anymore, using print merge.
Before i set a page with lets say A5 with the layout, and then in the print merge, i would put 4up (four A5), and it went well, using (collate and cut as well).
Now look at my attached file, the first page stays different size.
I just installed X6 64bits on my new Windows 7 64 bits machine, so far so good.
But when I try to use the Print Merge wizard, I get this error at the stage where I want to import the lost from an Excel sheet:
I need to prepare the artwork for 1000 member cards with the membership number present as a barcode. How can I generate the barcode for each individual card without doing it one by one?
View 14 Replies View RelatedWhile using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
View 4 Replies View RelatedI am 2 days into using X6 instead of X4 attached to my trotec engraver, using XP.All goes well with the print to the trotec job control, with it picking up the red vector cut line.
But if I print multiple pages, or use print merge (which is essentially the same thing), the cut line only prints as red on the first page. From then on the print line is some grey colour and consequently the laser does not pick it up.
Have tried changing colour conversion to the Trotec, but this doesn't have any effect.
I have a document, where I need to have 4 different print merge fields from 4 different data sources (.txt).I can only make it work with 1 print merge field.
View 5 Replies View RelatedWhenever I perform a PrintMerge the print dialog and its options are reset everytime I leave the print dialog.
Usually you hit print set parameters and hit apply, you now can cancel the dialog and hit print again, your previous settings should still be there. Same goes if you actually print and want to repeat the print process, as long as you dont close the document. This works for normal printing but fails with print merge.
Every time I close the dialog (not the document) all the settings are back to default. This did not happen in X5 and is very annoying since it resets to default even if you actually hit print, forcing you to set the parameters every time.
I am having an issue with X6's print merge not recognizing a properly formatted numeric filed from my Excel spreadsheet. My first issue was that Corel was adding a decimal point after my numbers. This was when they were still formatted as text fields. (which i still don't understand why, since they were just TEXT fileds)
I know that the fields need to be "numeric" fields.
FYI i have ALREADY COMPLETED MY TASK by using an "added" numeric filed that i added IN CorelDraw and then used the "Numeric Field Options" at the bottom of the page to get my number sequence.
However, that is not my question.... my question is: How do i get corel to RECOGNIZE a numeric field AS a numeric field in the first place.
Just a guess but with 64 bit Coreldraw maybe we would be able to Print Merge large files without crashing or having to break it into digestible bits.
Do vector conversion of complex images.Use Coreldraw like a publishing program, - kick Indesign
Computer memory is no longer the issue - 32 bit computer programs are.Until then I will stay with X4. run in Windows 7, 64 bit with 12 Gigs RAM.
Is there any way to make print merge fields relative in position to other fields or to non-variable text.
For example if I am doing address labels and I have fields for City and State:
Their positions are absolute, and the state ends up overwriting the city for long city text, as does the comma.
What I want is for the comma to follow the last letter of the city, and then state to follow that.
And yes, I realize that I can combine all three into one field, but I am asking this as a general usage of the feature. One doesn't always have control over the source.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
Is there any way to get the BOM to merge using something other than the Part Number. It seems as though it is the only option for merging the rows. I would like to use the stock number as the key.
View 6 Replies View RelatedI created a bom export rutine but when a virtual component is the same as a inserted standard part the rowmerge does not work.
See example picture in attachment.
merge a number of images overlaying each other then using compound paths to make one image.
View 5 Replies View RelatedI create a new assembly and place a component multiple times. When i open the Bill of Material i see one line with a QTY of 6 (the number of times the component was placed)
Now if i uncheck the "Enable Row Merge on Part Number Match" The BOM should show 6 lines with the same component and a QTY of 1 ....................correct?????? But it does not...........
I am creating a menu for a cient as a PDF. When I open it up in PDF format it is too large (174%) to view each page individually. It works well at about 75%. Is there a way I can have it open up at 75%?
View 7 Replies View RelatedI have copied a bunch of text into a text frame in CorelDRAW X3. Now I want to give style to each of the headings in the text.
In Microsoft Word there is a "copy formatting" option, allowing me to copy font size, colour, style etc. from one text portion to other text portions in a snap.
Is the same possible with text in CorelDRAW?
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
the thing is that on my previous version of Corel Draw (9? 10? whatever...) I could take a text frame with tabs lined up, copy it, paste it into a new document and all the tabs would be carried over from the original.
but when I try to do that in X3, it just copies across as plain text, meaning that I would have to do all the tabbing again.
When I say the tabs were set up, it's a list that looks like this:
Bill.................32..................Harvard
John..............27..................Oxford
where the .............. is made just by tabbing across.
is it possible to create a style for formating cells in a table in CDX6?I mean to format aligninig, text formating /font, margins and stuff like that?
Now I have to do a infoguide for my city and have to put in a lot of info - restaurants, hotels etc. Probably 300 and more and the best way is to use the great table tool. BUT it will be fatastic if I can format cells with style because with easy I can import xls file in Corel and the good news is that it recognise it as a table so the formating is the next step.After that selecting cells, changing fonts, margins etc. is a painfull job to do.