I have variable text that I need to print using the Print Merge in CDX6. One field of text requires that the "kerning" be set at +30. No problem in my template. However, after I have create the print merge to a new file, the kerning is gone.
What I am missing that will force the text "kerning" or spacing as in the original?
I have uninstalled and reinstalled my x5 and while it fixed the error causing my default text cursor to start at 270 degrees for some reason instead of 0, I still cannot edit ANY font text as far as the kerning goes. When i drag it, it snaps right back everytime. This is extremely frustrating when aligning text to a curved path and all the letters are squished together.wth? This just happened in the last week randomly.
View 1 Replies View RelatedWhy cant I save a cdr job with all the merge fields setup so that next time I open the file I can go straight to 'merge to new document'.
So Ive set up a 10 to view raffle tickets job. Inserted 20 numerical merge fields, positioned, resized, applied font size color alignment etc etc etc.. Takes ages..... So then merge to a new document, works nice and I can save it fine.
There are a hundred reasons why i may have to close the 'master' merge file before the job has been successfully printed. It may be a repeat print job.
Any which way I really dont get why the live merge data fields are lost on closing the file.
i need to type a text in corel of a specific size in millimeters. i know there is a setting in the corel options that allows sizing text directly in millimeters, instead of points. problem is that i need to type in romanian language, which has these points and marks above or bellow certain characters like A, T or S and the size in millimeters that i enter in the text size box will give that size to the "marked" characters, whereas i need only the pure, normal letter to be given that size. for example, an S with a comma under it.. i want just the S to be given a certain size and the comma scaled proportionally. furthermore, i would like to add an even spacing between all the letters that i type, also expressed in millimeters. i could only find a percent expressed setting in the text properties panel, i dont even know percents of what.
how can i do this in the fastest way possible, or automatically?
The program slows to a crawl when sending print merge jobs. Nothing else on the computer does this.
Core 2 Q6600 ~ 4GB DDR2 ~ nVidia 8800 GT Superclocked ~ 150GB 10,000 RPM Hard Drive
A1 field name is FIRST NAME B1 is LAST NAME C1 is ADDRESS D1 is CITY E1 is STATE
F1 is ZIP H1 is name1 I1 is name 2 Fields H1 & I1 could not be inserted.
I entered the above field labels and loaded them with the saved Excel file saved as a CSV (Comma Delimited)
When the First names and last names appear in a document there is too big of a space between the first and last names. The same problem happens when I put city, state, and zip on the same line
in the document.
I did a concatenate combining A1 &B1 to eliminate the space problem and a concatenate to combine D!, E1, and f1 Fields on one line. I put the results of the concatenates in seperate columns H1 & I1 but these 2 column fields could not be inserted for the print merge.
How i can solve the space problem between first and last names and the problem to put city, state and zip on the same line with proper space and punctuation.
I have a problem printing a merge booklet 8 pages. I am printing to a booklet printer. The printer folds and staples the booklet. When I merges the print I cannot “group” the pages to 8. The printer collates all the pages and make one booklet. How do I group the booklet one by one to several booklets of 8 pages. Windows 7 - 64 bit.
View 14 Replies View RelatedI am using Corel Draw X3 to create name tags that have room numbers printed on them so people know where they need to go. I am importing an Excel spreadsheet for the data. When it does the print merge it is adding a decimal at the end of the room number. For example, instead of showing room 215, it outputs 215.0 instead. How can I keep this from happening? I've tried everything I can think of in Corel and Excel both.
View 2 Replies View RelatedI have to make print merge firelds in CDX6.
The problem is that I have not Excel on my PC. Only Open office. I create a csv file but Open Office asks me every time what the Field and Text delimiter have to be - for the Field "," ";" ":" "tab" or "space" and for the Text " or '. After that it asks me to check or not few check boxes. See the picture below.
I tryed few combinations but the same result - Failed to save print merge data!
I dont know what to chek but the biggest problem is that I tryed to save a txt tab delimited on other computer with excel and when I try to print merge after loading the txt file Corel says Failed to save print merge data.
I saw that we can Print merge directly from xls files but I cant find that option in ODCB Data Source. Weird! because I have to do 1100 badjes with different merge fields like country, name, code etc... and if I start to make them by hand it will be forever!
First, I know how to use the base-print merge functions. Right now I have a job to complete with 1000 numbered 3part NCR forms.
I have never attempted this method (print merge), mainly due to my prior equipment limitations; however I am looking at realistically being able to print 100k+ page jobs without going to press/numbering machine (if only I could land about 10x 100k+ page jobs a month--press or no press--). Anyways, when I create this print merged file it takes easily 15 minutes to save (which might be understandable due to the number of pages to generate). BUT when I go to print, Draw closes. No error. No nothing.
When I use the print function in the print merge options, things lag extraordinarily. Also, I have to click on the various options many times for them to be registered. This option is like the prior--causing extremely unstable environments.
Auto numbering is a potential blessing, but this just isn't working for me. Also, is this a known issue? An upgrade to X6 might be prudent anyways; however, X4 is working fine for everything else.
(Running 3 different computers with Windows XP home & pro 32bit, with fairly good computers.)
I created a list if voucher numbering from 1001 to 1200, but when I perform the Print Merge, the list shown are with one decimal point i.e. 1001.0, 1002.0, etc....
What is the reason for this?
I am putting together a form for a soccer team, where I have a number of players with their info put into a nice table for scouting college coaches to have at their fingertips. It would be nice to automate this, but I don't see how to merge say 8 players' info onto one page. Any thoughts?
View 5 Replies View RelatedI have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies View Relatedview.jpg
since i upgraded to X6 i cannot do imposition anymore, using print merge.
Before i set a page with lets say A5 with the layout, and then in the print merge, i would put 4up (four A5), and it went well, using (collate and cut as well).
Now look at my attached file, the first page stays different size.
I just installed X6 64bits on my new Windows 7 64 bits machine, so far so good.
But when I try to use the Print Merge wizard, I get this error at the stage where I want to import the lost from an Excel sheet:
I need to prepare the artwork for 1000 member cards with the membership number present as a barcode. How can I generate the barcode for each individual card without doing it one by one?
View 14 Replies View RelatedWhile using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
View 4 Replies View RelatedI am using CorelDraw to create price labels for my store. When I merge in the price field for an item I want it to show on the label with the cents in superscript as opposed to using a decimal and full sized cents text. Is this possible in any version of CorelDraw using the print merge feature?
Keep in mind that I also have the price field in an envelope so that the price takes up the full size allotted on the label whether the price is $1.99 or $999.99.
I am 2 days into using X6 instead of X4 attached to my trotec engraver, using XP.All goes well with the print to the trotec job control, with it picking up the red vector cut line.
But if I print multiple pages, or use print merge (which is essentially the same thing), the cut line only prints as red on the first page. From then on the print line is some grey colour and consequently the laser does not pick it up.
Have tried changing colour conversion to the Trotec, but this doesn't have any effect.
I have a document, where I need to have 4 different print merge fields from 4 different data sources (.txt).I can only make it work with 1 print merge field.
View 5 Replies View RelatedWhenever I perform a PrintMerge the print dialog and its options are reset everytime I leave the print dialog.
Usually you hit print set parameters and hit apply, you now can cancel the dialog and hit print again, your previous settings should still be there. Same goes if you actually print and want to repeat the print process, as long as you dont close the document. This works for normal printing but fails with print merge.
Every time I close the dialog (not the document) all the settings are back to default. This did not happen in X5 and is very annoying since it resets to default even if you actually hit print, forcing you to set the parameters every time.
I am having an issue with X6's print merge not recognizing a properly formatted numeric filed from my Excel spreadsheet. My first issue was that Corel was adding a decimal point after my numbers. This was when they were still formatted as text fields. (which i still don't understand why, since they were just TEXT fileds)
I know that the fields need to be "numeric" fields.
FYI i have ALREADY COMPLETED MY TASK by using an "added" numeric filed that i added IN CorelDraw and then used the "Numeric Field Options" at the bottom of the page to get my number sequence.
However, that is not my question.... my question is: How do i get corel to RECOGNIZE a numeric field AS a numeric field in the first place.
Just a guess but with 64 bit Coreldraw maybe we would be able to Print Merge large files without crashing or having to break it into digestible bits.
Do vector conversion of complex images.Use Coreldraw like a publishing program, - kick Indesign
Computer memory is no longer the issue - 32 bit computer programs are.Until then I will stay with X4. run in Windows 7, 64 bit with 12 Gigs RAM.
Is there a way to adjust the kerning between 2 characters of text? I don't want to adjust the kerning of the entire word, just between 2 letters in the word. The font has too much space between the "V" and "A". I've tried using Paragraph Formatting, but that adjusts the entire word.
View 15 Replies View RelatedUsing x4. I am looking to merge a list of names into a matrix and maintain text constraints. I want all the names to fit into a certain space (ex. 1.5" long) and to maintain a certain character height (ex. .25" high). So my output should be no longer than 1.5" and all should have .25" high characters on a single line. I am able to setup the template and lock the fields, but during the merge everything gets messed up. All x, y positions, text length and text height have to be manually reentered for each name.
View 1 Replies View RelatedI need to make a bunch of barcode tags for a client. I know CorelDraw isn't the best tool for this, but it's what I have and this is a one-time job.
To partially automate the process, I'm trying to use print merge to make the parts of the tags that aren't barcode, but I include the text that belongs in the barcode on the page. The print merge works correctly, I get what I expect. The next step would be to cut the barcode text, choose Insert Barcode, and then paste the barcode text into the barcode dialog.
Except, when trying to paste the text intended for the barcode I discovered that I was actually copying the <var1> field--not the text. I verified this by copying the "text" from the print merge document and then pasting back into the same document--what I got from the paste was not the expected text, but <var1>.
Since the barcode type I was using does not support the "<" character, it gave me an "invalid character" error.
My attempted solution was to publish to a PDF file and then import into a new document. This worked except for some reason CorelDraw makes a new layer named, inexplicably, "Layer 1" (there's a "Layer 1" by default, why make a second layer with the same name?) BUT when the import is done the new layer is NOT chosen in Object Manager, the original "Layer 1" is. Which means, when I go to copy the text and insert the barcode it ends up UNDER the other parts of the barcode tag which are on the NEW "Layer 1".
Is there any way to make print merge fields relative in position to other fields or to non-variable text.
For example if I am doing address labels and I have fields for City and State:
Their positions are absolute, and the state ends up overwriting the city for long city text, as does the comma.
What I want is for the comma to follow the last letter of the city, and then state to follow that.
And yes, I realize that I can combine all three into one field, but I am asking this as a general usage of the feature. One doesn't always have control over the source.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
I am attempting to create a tag system that will have a 5 digit number but must be printed as shown below
1
2
3
4
5
We have to create a file to be engraved that has 2000 consecutive numbers and we cannot figure out how to make them appear stacked using the merge feature.
I´m trying to extract text from a Corel file to a TXT file in another editor and then merge it back in.Extracting the text seems to be working just fine but when I´m trying to merge it back in I get the error message "Wrong file format or could not open".
View 2 Replies View Relatedwhy I am unable to print text added to an image in X5? Everything else will print but any text added will not show in separations nor print.
View 1 Replies View Related