A1 field name is FIRST NAME B1 is LAST NAME C1 is ADDRESS D1 is CITY E1 is STATE
F1 is ZIP H1 is name1 I1 is name 2 Fields H1 & I1 could not be inserted.
I entered the above field labels and loaded them with the saved Excel file saved as a CSV (Comma Delimited)
When the First names and last names appear in a document there is too big of a space between the first and last names. The same problem happens when I put city, state, and zip on the same line
in the document.
I did a concatenate combining A1 &B1 to eliminate the space problem and a concatenate to combine D!, E1, and f1 Fields on one line. I put the results of the concatenates in seperate columns H1 & I1 but these 2 column fields could not be inserted for the print merge.
How i can solve the space problem between first and last names and the problem to put city, state and zip on the same line with proper space and punctuation.
I am having an issue with X6's print merge not recognizing a properly formatted numeric filed from my Excel spreadsheet. My first issue was that Corel was adding a decimal point after my numbers. This was when they were still formatted as text fields. (which i still don't understand why, since they were just TEXT fileds)
I know that the fields need to be "numeric" fields.
FYI i have ALREADY COMPLETED MY TASK by using an "added" numeric filed that i added IN CorelDraw and then used the "Numeric Field Options" at the bottom of the page to get my number sequence.
However, that is not my question.... my question is: How do i get corel to RECOGNIZE a numeric field AS a numeric field in the first place.
Why cant I save a cdr job with all the merge fields setup so that next time I open the file I can go straight to 'merge to new document'.
So Ive set up a 10 to view raffle tickets job. Inserted 20 numerical merge fields, positioned, resized, applied font size color alignment etc etc etc.. Takes ages..... So then merge to a new document, works nice and I can save it fine.
There are a hundred reasons why i may have to close the 'master' merge file before the job has been successfully printed. It may be a repeat print job.
Any which way I really dont get why the live merge data fields are lost on closing the file.
I have variable text that I need to print using the Print Merge in CDX6. One field of text requires that the "kerning" be set at +30. No problem in my template. However, after I have create the print merge to a new file, the kerning is gone.
What I am missing that will force the text "kerning" or spacing as in the original?
I have a problem printing a merge booklet 8 pages. I am printing to a booklet printer. The printer folds and staples the booklet. When I merges the print I cannot “group” the pages to 8. The printer collates all the pages and make one booklet. How do I group the booklet one by one to several booklets of 8 pages. Windows 7 - 64 bit.
I am using Corel Draw X3 to create name tags that have room numbers printed on them so people know where they need to go. I am importing an Excel spreadsheet for the data. When it does the print merge it is adding a decimal at the end of the room number. For example, instead of showing room 215, it outputs 215.0 instead. How can I keep this from happening? I've tried everything I can think of in Corel and Excel both.
The problem is that I have not Excel on my PC. Only Open office. I create a csv file but Open Office asks me every time what the Field and Text delimiter have to be - for the Field "," ";" ":" "tab" or "space" and for the Text " or '. After that it asks me to check or not few check boxes. See the picture below.
I tryed few combinations but the same result - Failed to save print merge data!
I dont know what to chek but the biggest problem is that I tryed to save a txt tab delimited on other computer with excel and when I try to print merge after loading the txt file Corel says Failed to save print merge data.
I saw that we can Print merge directly from xls files but I cant find that option in ODCB Data Source. Weird! because I have to do 1100 badjes with different merge fields like country, name, code etc... and if I start to make them by hand it will be forever!
First, I know how to use the base-print merge functions. Right now I have a job to complete with 1000 numbered 3part NCR forms.
I have never attempted this method (print merge), mainly due to my prior equipment limitations; however I am looking at realistically being able to print 100k+ page jobs without going to press/numbering machine (if only I could land about 10x 100k+ page jobs a month--press or no press--). Anyways, when I create this print merged file it takes easily 15 minutes to save (which might be understandable due to the number of pages to generate). BUT when I go to print, Draw closes. No error. No nothing.
When I use the print function in the print merge options, things lag extraordinarily. Also, I have to click on the various options many times for them to be registered. This option is like the prior--causing extremely unstable environments.
Auto numbering is a potential blessing, but this just isn't working for me. Also, is this a known issue? An upgrade to X6 might be prudent anyways; however, X4 is working fine for everything else.
(Running 3 different computers with Windows XP home & pro 32bit, with fairly good computers.)
I created a list if voucher numbering from 1001 to 1200, but when I perform the Print Merge, the list shown are with one decimal point i.e. 1001.0, 1002.0, etc....
I am putting together a form for a soccer team, where I have a number of players with their info put into a nice table for scouting college coaches to have at their fingertips. It would be nice to automate this, but I don't see how to merge say 8 players' info onto one page. Any thoughts?
I have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
since i upgraded to X6 i cannot do imposition anymore, using print merge.
Before i set a page with lets say A5 with the layout, and then in the print merge, i would put 4up (four A5), and it went well, using (collate and cut as well).
Now look at my attached file, the first page stays different size.
I need to prepare the artwork for 1000 member cards with the membership number present as a barcode. How can I generate the barcode for each individual card without doing it one by one?
While using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
I am using CorelDraw to create price labels for my store. When I merge in the price field for an item I want it to show on the label with the cents in superscript as opposed to using a decimal and full sized cents text. Is this possible in any version of CorelDraw using the print merge feature?
Keep in mind that I also have the price field in an envelope so that the price takes up the full size allotted on the label whether the price is $1.99 or $999.99.
I am 2 days into using X6 instead of X4 attached to my trotec engraver, using XP.All goes well with the print to the trotec job control, with it picking up the red vector cut line.
But if I print multiple pages, or use print merge (which is essentially the same thing), the cut line only prints as red on the first page. From then on the print line is some grey colour and consequently the laser does not pick it up.
Have tried changing colour conversion to the Trotec, but this doesn't have any effect.
I have a document, where I need to have 4 different print merge fields from 4 different data sources (.txt).I can only make it work with 1 print merge field.
Whenever I perform a PrintMerge the print dialog and its options are reset everytime I leave the print dialog.
Usually you hit print set parameters and hit apply, you now can cancel the dialog and hit print again, your previous settings should still be there. Same goes if you actually print and want to repeat the print process, as long as you dont close the document. This works for normal printing but fails with print merge.
Every time I close the dialog (not the document) all the settings are back to default. This did not happen in X5 and is very annoying since it resets to default even if you actually hit print, forcing you to set the parameters every time.
Is there any way to make print merge fields relative in position to other fields or to non-variable text.
For example if I am doing address labels and I have fields for City and State:
Their positions are absolute, and the state ends up overwriting the city for long city text, as does the comma.
What I want is for the comma to follow the last letter of the city, and then state to follow that.
And yes, I realize that I can combine all three into one field, but I am asking this as a general usage of the feature. One doesn't always have control over the source.
Here are my current steps for getting prints to shop floor;
1. download a list of drawings required from as/400 into Excel. 2. saveas .csv file 3. print mfg labels using label program reading .csv file 4. using labels, open .dwg from ACAD one at a time and print ea 5. apply labels to prints 6. give to mfg
I want to do this;
1. download a list of drawings required from as/400 into Excel 2. run macro to concanteate file location, name and .dwg to new column 3. run macro to print each drawing either from Excel or Acad - not sure which is better;
- Each drawing will have all label data incorporated in the drawing - currently nothing is in the drawing for label data, I'll need to create it. - should I insert a block that updates with the excel row data
4. give to mfg
My first goal is to be able to batch print with the same list that I use to create the labels, then I'll focus on getting the label data incorporated on the drawing.
Acad2004, Acad2008MEP Acrobat Pro 6.0 and 8.0 -and- CutePDF Writer
Merge Lines in PC3 'Device and Document Settings Tab' does not work when creating PDF's - but the same CTB works fine if I print to (2) different plotters and (3) different printers. We use gray for backgrounds and use black thicker lines for detail work. For many years we have had to make sure to send the backgrounds (gray colors) to the back (draworder) before plotting. It is not practical to do this every time we plot. I'm willing to use another program to create PDF's but I haven't found one that works.
How can i use different pictures in print and merge. It there any option or method to merge with dirrent pictures.
I am createing diffrent I cards where i made a text file for name address phone no etc. and using print and merge option it is printing text fine. But i need a method to insert difrrent pictures on card automatically.
address the background masking of mtext, mleaders and dimensions. To be independent of lines merge/overwrite would make simple everyday life much better.
We are still having to use wipeouts instead of this "new feature".
I am working on the AutoCAD customization and doing the same by VB.Net & C#.Net. But I just want to know the difference as mentioned below:
1. Insert Block In AutoCAD
Using VB.Net without using DataBase services..Only 1 statement is required to Insert the Block objAcadDocument.ModelSpace.InsertBlock(Required Arguments are here) Using C#.Net with DataBase services
There are many statments are there to insert only 1 block..Like Start Transaction, Lock the document, Get the Object Id Block etc...So my quetion is that when I have to use DataBase services and when not
what is the advantage of doing customization using DataBase services rather than go for wihout DataBase services.?
I have a CAD dwg with an embedded OLE object (Microsoft Excel). I am able to edit the text with no problems, but I am not able to resize the viewing window in CAD.
I have reset the 'print view' in Excel several times, hoping that this would render the problem. However, it is still showing 1 row of extra cells that I do not want to see.
I am converting an Excel spreadsheet to PDF using the PDFMaker macro. How do I set a Print Area and still maintain hyperlinks during the conversion?
You seem to have to choose between defining a Print Area OR maintaining hyperlinks. Is there a way to get both?
If I select a Print Area before invoking the PDFMaker macro, I get this message: Acrobat PDFMaker cannot create Tags, Bookmarks and Links for Worksheets with Print Area other than 'Entire Sheet'. Clear the 'Print area' field in Page Setup to get these features. Do you want to proceed and creat a PDF file without Tags?
